The VIDEO_LCD_RAYDIUM_RM68200 functionality can only work with BACKLIGHT
enabled, so express this dependency in Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
Some error messages emitted while loading the splash image are too
cryptic and don't provide any insights into the failure being a splash
related issue, such as 'Error (-2): cannot determine file size' etc.
This patch fixes the error codes by adding the function name to the
error print.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
[trini: Add missing ',' and wrap to 80-width]
Signed-off-by: Tom Rini <trini@konsulko.com>
In h_read_settings, val variable could be NULL due to
ofnode_read_prop returning an error. This variable
would then be used as the src in strcpy.
Add a NULL check after calling ofnode_read_prop.
Signed-off-by: Francois Berder <fberder@outlook.fr>
Reviewed-by: Simon Glass <sjg@chromium.org>
The phyCORE-AM62x and phyCORE-AM64x R5 SPL detects the populated DDR
size from the SoM EEPROM and falls back to 2 GB if detection fails. For
boards without a populated EEPROM or if no detection needed, the detection
can be bypassed via CONFIG_PHYCORE_AM6{2,4}X_RAM_SIZE_FIX and one of
the CONFIG_PHYCORE_AM6{2,4}X_RAM_SIZE_<size> choices.
Add a "DDR RAM Size" section to both board docs describing this
behaviour and listing the available size options (1/2/4 GB for AM62x,
1/2 GB for AM64x).
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add two short sections to the common K3 phyCORE docs.
Describe the default boot flow and its deprecated version.
And write down the use of the watchdog.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
A handful of small inaccuracies had crept into the phyCORE-AM6x docs.
Mostly typos and formatting Issues. Fix them. While at it, update the
am62a board to use the correct product link.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
RAUC slot selection is now handled by the RAUC bootmeth, which all
phytec K3 boards use. Remove the unused env-based logic.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Martin Schwan <m.schwan@phytec.de>
Mirror the j721s2 changes from commit c4fcf9b806 ("board: ti: j7*:
Update rm-cfg and tifs-rm-cfg") to repurpose allocated resources with
version V11.02.07 of k3-resource-partition.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Dominik Haller <d.haller@phytec.de>
Add rcfg_yaml_tifs node override to use tifs-rm-cfg.yaml instead of
the default rm-cfg.yaml for the phyCORE-AM62x SoM.
This enables binman to include the tifs-rm-cfg.yaml configuration
when building tiboot3 images, bringing the phyCORE-AM62x SoM in line
with other K3 devices that already use tifs-rm-cfg.yaml.
This builds on the tifs-rm-cfg file added earlier in this series.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add a separate tifs-rm-cfg.yaml so the TIFS bundle uses the trimmed
TIFS view instead of reusing rm-cfg.yaml, matching the rest of the
AM62 boards.
Mirrors commit 964bda9e80 ("board: ti: am62x: tifs-rm-cfg: Add the
missing tifs-rm-cfg:") for the phyCORE-AM62x SoM.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Ernest Van Hoecke <ernestvanhoecke@gmail.com> says:
This series updates the Resource Management configuration for Toradex
K3-based boards and makes sure the TIFS-specific RM configuration is
used where applicable.
For Verdin AM62P, the tifs-rm-cfg.yaml file is refreshed with
k3-resource-partition V12.00.00 so that it stays in sync with the
existing rm-cfg.yaml update for the v11.02.09 and v12.00.00 TIFS
firmware resource reservation.
For Verdin AM62, the missing tifs-rm-cfg.yaml file is added. The file
matches the TI AM62x configuration, and rm-cfg.yaml was verified to
remain unchanged when regenerated with the same tool version.
For Aquila AM69, both rm-cfg.yaml and tifs-rm-cfg.yaml are updated to
match the resource allocation changes already present in the TI J784S4
configuration files.
Finally, the Verdin AM62 and Verdin AM62P binman descriptions are
updated to use tifs-rm-cfg.yaml for the TIFS RM fragment when building
tiboot3 images, following the same pattern used by the corresponding TI
AM62x/AM62Px platforms.
The generated/updated files were compared against the matching TI board
configuration files where applicable.
Link: https://lore.kernel.org/r/20260508-v1-update-rm-cfg-v1-0-ec9d033f8ec1@toradex.com
Add rcfg_yaml_tifs node overrides to use tifs-rm-cfg.yaml instead of
the default rm-cfg.yaml for Verdin AM62 and Verdin AM62P platforms.
This enables binman to include the tifs-rm-cfg.yaml configuration when
building tiboot3 images in line with other K3 devices that already use
tifs-rm-cfg.yaml.
This follows the changes done by TI to their am62x/am62px platforms. [1]
[1] commit 41814276f0 ("arm: dts: k3: am62x/am62px: Enable tifs-rm-cfg in binman")
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Repurpose the allocated resources with version V12.00.00 of
k3-resource-partition, matching the update made for the TI J784S4
configuration files. [1]
The Aquila AM69 rm-cfg.yaml and tifs-rm-cfg.yaml remain aligned with
board/ti/j784s4/*-rm-cfg.yaml.
[1] commit c4fcf9b806 ("board: ti: j7*: Update rm-cfg and tifs-rm-cfg")
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Add the previously missing TIFS RM configuration, generated with
V12.00.00 of k3-resource-partition.
This file is exactly the same as board/ti/am62x/tifs-rm-cfg.yaml.
rm-cfg.yaml and tifs-rm-cfg.yaml need to be in sync, this was already
taken care of by TI. [1]
It was verified that rm-cfg.yaml also remained unchanged with V12.00.00
of the tool.
[1] commit 64ebab10b5 ("toradex: verdin-am62: rm-cfg: Update rm-cfg to reflect new resource reservation")
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
TI updated rm-cfg for v11.02.09 of the TIFS firmware. [1]
Refresh the tifs-rm-cfg.yaml as well, with version V12.00.00 of
k3-resource-partition, so that it remains in sync with rm-cfg.yaml.
rm-cfg.yaml was also updated with V12.00.00 of the tool and noted to
have no changes.
[1] commit a66704e9a1 ("board: toradex: verdin-am62p: rm-cfg: Update rm-cfg to reflect new resource reservation")
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
On the j722s platform, the DM firmware resets the wkup_r5 core at boot to
enable both of its TCM memories.
This reset sequence involves three steps:
- Acquiring processor ownership of wkup_r5
- Configuring the core and requesting a reset via TIFS
- Releasing ownership.
When the Linux remoteproc driver comes up, it acquires ownership of wkup_r5
to query its state, making A53_2 the new owner.
During system suspend, TIFS saves the processor ACL[1] table to DDR as
part of its context.
On resume, TIFS restores the ACL table, leaving A53_2 as the owner of
wkup_r5. At this point, DM (WKUP_0_R5_0 host[2]) no longer has ownership
and is therefore unable to perform the reset sequence it needs,
causing it to crash.
To fix this, configure the wkup_r5[3] processor with dual ownership:
- WKUP_0_R5_0 (Secure) as primary owner.
- A53_2 (Non-Secure) as secondary owner.
[1] https://software-dl.ti.com/tisci/esd/latest/3_boardcfg/BOARDCFG_SEC.html#pub-boardcfg-proc-acl
[2] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j722s/hosts.html
[3] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j722s/processors.html
Signed-off-by: Abhash Kumar Jha <a-kumar2@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
The load addresses for DFU download binaries were hardcoded for K3
devices which required redefinition of such env for boards that deviated
from the expected K3 memory map (such as AM6254atl EMV).
This patch replaces the hardcoded addresses with their corresponding
Kconfig options making the k3_dfu.env more general.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
In the TI's K3 bootflow of tiboot3.bin -> tispl.bin -> u-boot.img:
(R5 SPL) (A53 SPL)
We currently provide a common dfu_alt_info_ram for both R5 SPL and A53
SPL which is not intuitive in a regular bootflow where each binary
should only request it's immediate next stage.
This patch updates dfu_alt_info_ram such that the R5 SPL would only
request for tispl.bin and A53 SPL would only request u-boot.img.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Boot on am33xx without CONFIG_USB will currently fail, as we error-out
of arch_misc_init() if no UCLASS_MISC device is found. This requirement
was introduced in commit 3aec264869 ("am33xx: board: probe misc
drivers to register musb devices").
Instead, only attempt the UCLASS_MISC init if we would expect the MUSB
TI device to be present. Add a comment to explain why we're doing the
device lookup (which we immediately discard).
Fixes: 3aec264869 ("am33xx: board: probe misc drivers to register musb devices")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Tom Rini <trini@konsulko.com>
Avoid using ps_prompt having a NULL pointer. For that, use the same
approach as in uboot_cli_readline().
Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Adam Lackorzynski <adam@l4re.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The FAT time format stores seconds/2 in bits 4:0. The expression
'tm.tm_sec > 1' is a boolean comparison (yields 0 or 1) where a
right-shift 'tm.tm_sec >> 1' was intended. As a result every
file timestamp written by U-Boot has its seconds field set to
either 0 or 1, depending on whether tm_sec is greater than 1.
Also fix the indentation of the tm_hour line.
Fixes: ba23c378c5 ("fs: fat: fill creation and change date")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Enable FIT_VERITY in the sandbox configs that build a full U-Boot
binary so CI may exercise the new dm-verity unit test
(test/boot/fit_verity.c) and the mkimage pytest
(test/py/tests/test_fit_verity.py) introduced earlier in this series.
The SPL/VPL/noinst variants only load U-Boot proper, never an OS, so
dm-verity is meaningless there and is not enabled.
Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add test/py/tests/test_fit_verity.py covering:
- mkimage writes correct dm-verity properties for matched and
mismatched block sizes (4096/4096 and 4096/1024);
- veritysetup verify re-checks the digest against the .itb's
external data section;
- mkimage rejects dm-verity images built without -E.
All tests are skipped if veritysetup is not installed on the host.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add test/boot/fit_verity.c with four tests that construct FIT blobs
in memory and exercise fit_verity_build_cmdline().
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add documentation for CONFIG_FIT_VERITY which allows U-Boot to
construct dm-mod.create= and dm-mod.waitfor= kernel command-line
parameters from dm-verity metadata embedded in FIT filesystem
sub-images.
The new document covers the relationship between FIT loadable indices
and the /dev/fitN block devices that the Linux uImage.FIT block driver
creates, provides a complete .its example with a dm-verity-protected
SquashFS root filesystem, describes all required and optional dm-verity
subnode properties and explains how mkimage generates the verity
metadata automatically.
dm-verity is only supported for external-data FIT images (mkimage -E);
mkimage aborts with an error if the flag is omitted.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
When mkimage encounters a dm-verity subnode inside a component image
node it now automatically invokes veritysetup(8) with --no-superblock
to generate the Merkle hash tree, screen-scrapes the Root hash and Salt
from the tool output, and writes the computed properties back into the
FIT blob.
The user only needs to specify algorithm, data-block-size, and
hash-block-size in the ITS; mkimage fills in digest, salt,
num-data-blocks, and hash-start-block. Because --no-superblock is
used, hash-start-block equals num-data-blocks with no off-by-one.
The image data property is replaced with the expanded content (original
data followed directly by the hash tree) so that subsequent hash and
signature subnodes operate on the complete image.
fit_image_add_verification_data() is restructured into two passes:
dm-verity first (may grow data), then hashes and signatures.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Make hexdump.h work in host-tool builds by using 'uint8_t' instead
of 'u8', and including either user-space libc <ctype.h> for host-tools
or <linux/ctype.h> when building U-Boot itself.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add fit_verity_build_cmdline(): when a FILESYSTEM loadable carries a
dm-verity subnode, construct the dm-mod.create= kernel cmdline parameter
from the verity metadata (block-size, data-blocks, algo, root-hash,
salt) and append it to bootargs.
Also add dm-mod.waitfor=/dev/fit0[,/dev/fitN] for each dm-verity device
so the kernel waits for the underlying FIT block device to appear before
setting up device-mapper targets. This is needed when the block driver
probes late, e.g. because it depends on NVMEM calibration data.
The dm-verity target references /dev/fitN where N is the loadable's
index in the configuration -- matching the order Linux's FIT block
driver assigns block devices. hash-start-block is read directly from
the FIT dm-verity node; mkimage ensures its value equals num-data-blocks
by invoking veritysetup with --no-superblock.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add FIT_VERITY_NODENAME and the complete set of FIT_VERITY_*_PROP
constants for the dm-verity child node of filesystem-type images, plus
the five optional boolean error-handling property names aligned with the
flat-image-tree specification.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
The remaining configuration settings section is legacy README content.
Its details belong in Kconfig help or the rST documentation.
Remove the section instead of keeping partial stale configuration
documentation in README.
Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Environment callbacks can already be configured from Kconfig with
CONFIG_ENV_CALLBACK_LIST_STATIC, but static environment flags still
require board headers to define CFG_ENV_FLAGS_LIST_STATIC.
Add CONFIG_ENV_FLAGS_LIST_STATIC and use it as the only board-provided
static environment flags list. Convert the remaining default-config users
from CFG_ENV_FLAGS_LIST_STATIC to defconfig settings and drop the legacy
header macro from ENV_FLAGS_LIST_STATIC.
Move the environment flags format documentation out of README and into
the developer environment documentation. Include the format in the
Kconfig help as well.
This lets boards configure writeable-list policy and type validation
from defconfig without adding a config header solely for env flags.
This preserves the behavior of default configs. Header-only cases that
were inactive in upstream defconfigs are not converted into defconfig
entries: iot2050 can add its list when enabling ENV_WRITEABLE_LIST, and
smegw01 can add mmcdev:dw support if the unlocked SYS_BOOT_LOCKED=n
configuration is needed.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Walter Schweizer <walter.schweizer@siemens.com>
Aristo Chen <aristo.chen@canonical.com> says:
This series ends with replacing the verbose fdt_next_node() + ndepth
idiom in boot/image-fit.c with fdt_for_each_subnode(), bringing the
file in line with boot/image-fit-sig.c. Six of the seven sites in
image-fit.c predate the macro by 2-6 years; the seventh was
copy-pasted from a neighbour in 2015 just after the macro landed.
The old idiom is legacy, not a deliberate technical choice.
Converting straight to the macro turned out to need a prerequisite,
which is patch 1. fit_print_contents() reads the default-config
property using the loop variable left over after iterating /images
children. With /images defined first in the source (the conventional
layout) libfdt's walker happens to leave that variable pointing at
/configurations and the read works. With /configurations defined
first the read returns NULL and the "Default Configuration" line is
silently omitted. fdt_for_each_subnode()'s post-loop value is
unconditionally a negative error code, so a naive conversion would
have made the missing line the unconditional behaviour. Patch 1
reads the property from confs_noffset directly and removes the
layout dependency.
Patch 2 adds a regression test for the configs-before-images
layout, which had no coverage.
Patch 3 is the mechanical conversion at all seven sites,
equivalence-preserving as described in the per-patch message.
Link: https://lore.kernel.org/r/20260508213217.3807786-1-aristo.chen@canonical.com
Replace the verbose fdt_next_node() + ndepth pattern with the
fdt_for_each_subnode() macro at all seven sites in boot/image-fit.c
where the loop only ever processes direct children. The macro is
already defined in <linux/libfdt.h> and used in boot/image-fit-sig.c,
so this brings image-fit.c in line with the rest of the FIT code.
The conversions are equivalence-preserving:
- fit_get_subimage_count(): the depth-1 filter and the macro are
both restricted to direct children.
- fit_conf_print(): the parameter is named noffset, so the loop
now uses sub_noffset to keep the parent reference stable.
- fit_print_contents(): the count reset that lived inside the for
initialiser is moved out as an explicit assignment before each
loop, so the second loop still starts from zero.
- fit_image_print(): straightforward replacement.
- fit_all_image_verify(): same shape as the print loops, with the
count reset moved out as an explicit assignment before the loop.
- fit_conf_find_compat(): the body's "if (ndepth > 1) continue"
guard is redundant once the macro is in use, and is dropped.
No behaviour changes outside of these mechanical reductions. Local
ndepth declarations that are no longer referenced are removed.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a test that builds a FIT whose /configurations node is defined
before /images in the source, runs iminfo, and asserts that the
"Default Configuration: '<name>'" line appears in the output.
Before the fix in the preceding commit ("boot/fit: read default-config
property from the configurations node"), fit_print_contents() read the
default-config property using the loop variable left over from iterating
/images children. With /images defined first that variable accidentally
pointed at /configurations and the line printed correctly; with
/configurations defined first the read returned NULL and the line was
silently omitted. The new test exercises the latter layout, which had
no coverage.
iminfo and the fit_print_contents() path had no test coverage at all
before this commit.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
In fit_print_contents() the default configuration's unit name is read by
calling fdt_getprop() with noffset rather than confs_noffset. Today this
happens to work by coincidence: the preceding loop walks /images using
fdt_next_node(), and when iteration leaves the subtree libfdt returns
the offset of the next sibling in DFS order, which by FIT layout
convention is /configurations. The depth counter then drops below zero
and the loop exits with noffset still pointing at /configurations.
This relies on /images and /configurations being adjacent siblings and
on the implementation detail of fdt_next_node()'s post-exhaustion
return value. It also blocks a follow-up conversion to
fdt_for_each_subnode(), whose post-loop loop variable is a negative
error code rather than a valid offset.
Use confs_noffset directly, which the comment immediately above the
call already names as the source.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Sync include/ec_commands.h from upstream commit 4f3d17aa34
("skywalker: set SLEEP_TIMEOUT_MS to 50 seconds"). The new file makes
two build assumptions that do not hold for U-Boot.
It hides '<stdint.h>' from __KERNEL__ builds, leaving UINT16_MAX
(used by EC_RES_MAX) undefined for U-Boot; widen the gate to
'!defined(__KERNEL__) || defined(__UBOOT__)'
It gates '<linux/limits.h>' on '#ifdef __KERNEL__'; the matching
'#else' branch defines BIT()/BIT_ULL()/GENMASK()/GENMASK_ULL()
locally, assuming kernel headers provide those macros otherwise.
U-Boot defines __KERNEL__ too but has no <linux/limits.h>. Nest a
'!defined(__UBOOT__)' check around the include so the __UBOOT__ path
stays in the __KERNEL__ branch (no local BIT/GENMASK defines), which
avoids redefinition warnings against U-Boot's linux/bitops.h. Pull
in linux/bitops.h up front for U-Boot so the file's own BIT() and
GENMASK() uses still resolve.
Adapt callers to two interface changes. The 'ec_current_image' enum
tag is now 'ec_image' (EC_IMAGE_* constants unchanged); rename it in
affected files to match. The VBNV-context interface was dropped
upstream, but it still used in lab Chromebooks; keep those constants and
structs in cros_ec.h
Likewise, MEC_EMI_BASE and MEC_EMI_SIZE are a U-Boot-local addition to
ec_commands.h that the upstream sync removes; preserve them in cros_ec.h
next to the VBNV block, and switch the only consumer
(arch/x86/cpu/apollolake/cpu_spl.c) to include cros_ec.h
Signed-off-by: Simon Glass <sjg@chromium.org>
If the LED is in the ON state, it is briefly set to OFF
then to ON immediately due to falling-through in the default
case.
This commit ensures that no fall-through occurs and thus
a LED initially in the ON state is turned off before blinking.
Signed-off-by: Francois Berder <fberder@outlook.fr>
Fixes: 9e3d83301e ("led: toggle LED on initial SW blink")
Acked-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
gpio status -a does not have labels: the existing path walks
the per-bank requested label table.
Issue: The boards that populate the standard gpio-line-names
property in their device tree end up with anonymous entries,
which is not logic with the purpose of having those names in the DT.
No impact with boards that does not set gpio-line-names.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
test_fs/test_erofs.py and test_fs/test_squashfs/sqfs_common.py both
defined a generate_file() helper that writes a file of a given size
filled with 'x'. The two functions were functionally identical and
differed only in parameter names and docstrings.
Move the helper into the existing test/py/utils.py module, which is
the established home for generic test utilities (md5sum_file,
PersistentRandomFile, attempt_to_open_file). Update both call sites
to use it.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: joaomarcos.costa@bootlin.com
Reviewed-by: Simon Glass <sjg@chromium.org>
A file like rm-cfg.yaml accidentally left in the source tree root
shadows the board-specific copy. binman builds the wrong YAML, the
resulting rm-cfg.bin may match a different SoC, and we end up with
the following error:
k3_system_controller sysctrler: k3_sysctrler_start:
Boot Notification response failed. ret = -110
Move the board directory ahead of the srctree root so that the
most-specific match wins.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Our official domain is now u-boot-project.org, so update all in-tree
references to use the correct domain.
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini
Anshul DalalandTom Rini
Francois BerderandTom Rini
Wadim EgorovandTom Rini
Ernest Van HoeckeandTom Rini
Abhash Kumar JhaandTom Rini
Jeremy KerrandTom Rini
Adam LackorzynskiandTom Rini
Heinrich SchuchardtandTom Rini
Daniel GolleandTom Rini
James HilliardandTom Rini
Aristo ChenandTom Rini
Simon GlassandTom Rini
Vincent JardinandTom Rini