The boot ROM on Analog Devices ADSP-SC5xx SoCs requires code packaged
in the LDR format. Normally this is available as part of
our yocto-derived toolchain but, it is not a part of any other pre-made
toolchain anymore, so it is otherwise unavailable in the docker image
for CI. This patch adds a source build from the ADI maintained github
repository. In the future, a package available for install via apt will
be available, but currently there is no arm64 build upstream, so we must
build from source for the time being to support CI on both amd64 and
arm64 runners. The same ldr tool is used for arm and arm64 for all of
our boards with names adjusted to match the expected $(CROSS_COMPILE)
for these boards.
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Binman is optionally supported for Analog Devices sc5xx SoCs if Yocto is
not being used to create and assemble system images. The spl LDR is
generated locally but other artifacts such as kernel FIT image and root
file system are built externally and must be supplied to binman if used.
Binman is enabled by selecting the SC5XX_USE_BINMAN config symbol and
the image structure is included in the shared sc5xx device tree.
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Support for the SOM-CRR variants introduces library level changes that
are not modelled in the device tree. As a result they cannot both be
selected at the same time, so this updates the dependency in Kconfig to
prevent them from being enabled together.
Reported-by: Philip Molloy <Philip.Molloy@analog.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
The symbol SC_BOOT_MODE was named incorrectly and inconsistently with
its usage. The selected boot mode is set only by hardware and cannot be
adjusted through software (apart from the use of FORCE_BMODE to instruct
the boot rom to ignore the hardware setting when loading uboot proper,
but this cannot change how SPL is loaded).
This symbol actually controlled the BCODE (easily confused with BMODE,
shorthand for boot mode), so this renames it to SC_BCODE and updates the
help text to reflect its actual usage: the BCODE is an SoC- and boot
mode-specific setting that affects how the boot rom configures QSPI or
OSPI in order to read an LDR file from the associated peripheral.
Reported-by: Philip Molloy <Philip.Molloy@analog.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Add Kconfig symbols to parameterize the SPI flash layout used in a
default-ish configuration. This adds more flexibility to the default ADI
environment, enabling customers with boards based on but not identical
to an ezkit to reuse more of the infrastructure. Furthermore it allows
for yocto (the expected default) or binman (to be introduced in this
series) to configure or use the flash layout based on a single
definition of all of the parameters when creating an image.
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
My old mail address, ziyao@disroot.org, has stopped working. Switch to
my new address, me@ziyao.cc, and map it in .mailmap.
Signed-off-by: Yao Zi <me@ziyao.cc>
With LTO enabled, mini U-Boot was hanging during reloc_fdt().
The initial stack pointer was placed too low, and the FDT memcpy
destination was carved only 4KB above it. This left insufficient
margin, causing the FDT copy to overwrite the live early stack
and corrupt execution before relocation.
To fix this, increase the malloc heap from 8KB to 12KB and raise the
initial stack pointer by 4KB. Together these adjustments increase
the separation between the early stack and the FDT region during
the pre-relocation phase, eliminating the overlap and fixing the
hang on mini builds (QSPI/OSPI).
Signed-off-by: Pranav Tilak <pranav.vinaytilak@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
The GitHub dependabot tool has reported two "high" priority bugs,
CVE-2025-66418 and CVE-2025-66471, with this package. Update to the
patched version.
Reported-by: GitHub dependabot
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
While adding CPSW device support to enable Ethernet boot for J722S,
dev-data and clk-data for eMMC was removed by mistake, which leads to eMMC
boot failure. Update the dev-data and clk-data to fix that.
Fixes: a02009f3a8 ("arm: mach-k3: j722s: Update SoC autogenerated data to enable Ethernet boot")
Reported-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
ARM GCC tool check is not up to date,
while issues are reported such as file truncated linker errors.
Using ARM official cross tools shows that 10.0.1 is a safe
version to support latest kbuild bump properly.
Signed-off-by: Brian Sune <briansune@gmail.com>
I am moving over to using my email address at kernel.org.
Change this in all the affected MAINTAINERS files.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Pull request efi-2026-01-rc4
CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/28652
Documentation:
* Correct and add missing pytest hook script environment variable names
* board: verdin-am62p: Fix boot log output
* Add a page for downloading the U-Boot logo with and without text
UEFI:
* Fix a memory leak when retrieving device paths from boot vars
Fix boot log output not being rendered correctly, fix
it doing the same as done in verdin-am62.rst.
Fixes: b8c43968b8 ("board: toradex: add verdin am62p support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
get_dp_device() is used to derive the device path from a boot variable.
However, if the last efi_get_variable_int() call fails, we return an
error without freeing 'buf'.
There's no need to call efi_get_variable_int() for variables we don't
know the size since we have the efi_get_var() wrapper.
Replace that in the two instances we use it. The first one will also
fix the memory leak.
A nice sideeffect is that the code size is also reduced, since we are
re-using functions instead of open coding them
$~ bloat-o-meter u-boot u-boot.new
add/remove: 0/0 grow/shrink: 1/2 up/down: 6/-196 (-190)
Function old new delta
version_string 70 76 +6
efi_launch_capsules 2288 2196 -92
get_dp_device 244 140 -104
Total: Before=1222331, After=1222141, chg -0.02%
Fixes: c74cd8bd08 ("efi_loader: capsule: add capsule_on_disk support")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add the _EXTRA variants of U_BOOT_BUILD_DIR and U_BOOT_RESULT_DIR to the
list of environment variables set for hook scripts.
These were added in commit 8f2a9fa7d6 ("test: Support testing with two
board-builds") but were not documented.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Fix the names of environment variables set for hook scripts. These
have a U_BOOT_ prefix, not UBOOT_.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Unfortunately I don't really have time to review clock patches. When I
initially started maintaining this subsystem I had more free time than I do
now. But I also found it hard to motivate myself to review patches. Many
clock patches add support for new SoCs and they are time consuming to
review properly. You effectively have to spend a few hours reading the
reference manual (if it's public!) and reviewing drivers is no small feat
either. This is made more difficult since clocking is often very different
between SoCs and it can be difficult to determine whether something is a
bug in the driver or a workaround for some hardware behavior. I mostly
don't care about any given SoC unless I'm hacking on it so I ended up with
a ton (more than 7000) of unreviewed patches piling up in my inbox. I'd
love to be more active, but I have a day job and I usually want to work on
something more interesting when I get home. I still think the clock
subsystem is a major mess but I don't care enough to fix it :l
The subsystem itself should probably get orphaned since AFAICT all patches
go through the mach/arch maintainer or to Tom.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
When I modified this code I meant to accept the LGPL offer to convert the
license to GPL. However, while there is an LGPL 2.1, the next version of
the GPL after 2.0 is 3.0. Fix the license version
Fixess: c4ac52f55d ("test: Add test for strlcat")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Python 3.7 and 3.8 lack the files attribute in importlib.resources.
Use importlib_resources to fix build errors with Python 3.8:
binman: module 'importlib.resources' has no attribute 'files'
Fixes: 538719cb6a ("binman: migrate from pkg_resources to importlib")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Quentin Schulz <quentin.schulz@cherry.de>
[trini: Re-add # pragma: no cover line]
Signed-off-by: Tom Rini <trini@konsulko.com>
The MAINTAINERS files for B&R boards are not in sync
with the current file names. Update the files so
that they are correct again.
Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
B&R Industrial Automation has been acquired by ABB in 2017, and this
will be reflected in our email addresses beginning from December 2025.
The email addresses change as follows:
@br-automation.com -> @<country-code>.abb.com
The existing email addresses will be valid until December 2026.
Add entries for Bernhard Messerklinger and myself to .mailmap, and
update the MAINTAINERS files.
Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Signed-off-by: Wolfgang Wallner <wolfgang.wallner@at.abb.com>
This is R-Car X5H support. It was originally posted before rc1 and the
changes are well isolated. This is the final patchset which enables the
Gen5 drivers that are already in tree. I waited with this a bit until
the SCMI ID discussion stabilized and TFA X5H support landed. So now, I
can add the final piece into U-Boot too.
Note that this is still very much experimental, the X5H upstreaming is
in very early stages. The OF_UPSTREAM conversion will happen likely in
2026.04 or 2026.07 window, depending on when the Linux DTs land. The
compound-clock.c is surely going to go away once SCP gets updated and
the MFIS mailbox will be reworked once upstream bindings get developed.
This also includes SH DT alignment fix.
Extend the stub PSCI implementation with support for R-Car Gen5.
R-Car Gen5 uses different register to perform reset, therefore
add a compile-time conditional. This is __secure code, therefore
the runtime SoC detection parts are not available to it, hence
the compile time conditional.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Tweak commit message
Add initial support for Renesas R-Car X5H R8A78000 Ironhide board.
This consists mainly of DTs, Makefile and Kconfig entries and board
specific configuration files.
The DTs will be gradually switched over to Linux DTs via OF_UPSTREAM
once Linux DTs become available upstream, as upstreaming progresses.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add initial device trees for Renesas R-Car X5H R8A78000 SoC.
Include very basic clock, reset, power domain headers which
are used to control supported peripherals via SCMI / SCP. The
headers are currently kept limited to avoid possible ABI break.
A lot of clock are still stubbed via fixed-clock, this is going
to be gradually removed over time, as more of the platform is
upstreamed.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Khanh Le <khanh.le.xr@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add initial changes to support Renesas R-Car Gen5 SoC.
Introduce Kconfig entries, architecture headers and PRR IDs for Renesas
R-Car Gen5 and R-Car X5H R8A78000 SoC. Add Makefile change to produce
u-boot-elf.srec with correct offset for installation tooling. Update
MAINTAINERS entry to cover both r8a77nnn and r8a78nnn .
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add support for the Renesas MFIS mailbox, which provides an interface
between the different CPU Cores, such as AP System Core domain and the
Realtime Core domain, SCP Core domain and AP System Core domain or
Realtime Core domain and AP System Core domain or Realtime Core domain.
Signed-off-by: Tuyen Dang <tuyen.dang.xa@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Update the driver
[Marek: Rename the driver to renesas-mfis, simplify the driver.
Always use only one TX channel and no RX channel, drop all
unnecessary code. Perform 1ms delay in send callback which
is perfectly fine to do in U-Boot which does RX polling]
The current state of SCP on Renesas R-Car Gen5 is not yet final and
is still missing full clock control, the clock control is exposed as
separate enable/disable and rate controls.
Temporarily introduce custom local compound clock, which are used as
an adaptation layer between U-Boot clock tree and current state of
SCP, and which bind two SCP clock into a single compound clock, which
provides both enable/disable and rate controls.
This is mainly meant to be used by SD/eMMC controller, to allow the
driver to both turn its clock on and off, and also obtain the current
clock rate. This is going to be removed once the SCP clock protocol
solidifies.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Make sure the end of U-Boot is at 8-byte aligned offset, not 4-byte
aligned offset. This allows safely appending DT at the end of U-Boot
with the guarantee that the DT will be at 8-byte aligned offset. This
8-byte alignment is now checked by newer libfdt 1.7.2 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The Linux kernel can discover SMBIOS tables through two primary methods:
1. Via EFI tables, when using EFI boot;
2. Via the 'smbios3-entrypoint' property in the /chosen node of the
device tree.
When U-Boot boots a Linux kernel using a non-EFI command ("bootm",
"bootz", or "booti"), the kernel relies on the device tree to detect
the hardware. If SMBIOS tables are available in U-Boot, they should
be passed to the kernel via this device tree property.
This patch modifies boot_fdt_prepare(), to inject the SMBIOSv3 table
address into the device tree if there is a table generated by U-boot.
The "board_fdt_chosen_smbios" is weak in order to leave the possibilty
for specific boards to select custom SMBIOS addresses.
The changes in this patch are added in the context of supporting this
device tree property in linux kernel:
https://lkml.org/lkml/2025/10/24/1393
Device tree schema was updated to include the "smbios3-entrypoint" node
in pull request: https://github.com/devicetree-org/dt-schema/pull/177
Signed-off-by: Adriana Nicolae <adriana@arista.com>
The redundant environment offset is already set in board configuration,
but the redundant environment itself is not explicitly enabled. Make
sure the redundant environment is enabled, as we most certainly do want
to have two copies of the environment.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The CONFIG_ENV_OVERWRITE allows easy rewrite of environment variables
like 'ethaddr' and 'serial#' without any protection against accidental
removal of those variables. Remove this setting to add extra layer of
protection to those variables. The variables can still be overridden
using 'env set -f' (force set) if really needed.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Document the image preparation and flashing techniques for
Exynos7870-based boards. This is done in a separate file in a
sub-directory, which is linked back to the main documentation.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Add basic support for the Exynos7870 SoC, this includes device tree
match logic using multiple boards, where devices use a stub dtb in
Samsung's QCDT format. S-BOOT, the previous stage bootloader, places its
cmdline arguments there, which has identifying information.
This is added with support for three devices:
* Samsung Galaxy A2 Core (codename: a2corelte)
* Samsung Galaxy J6 (codename: j6lte)
* Samsung Galaxy J7 Prime (codename: on7xelte)
Add their device trees in the defconfig, and also enable the clock and
pin controller drivers.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Add support for a generic platform which intends to support multiple
boards powered by ARMv8 Samsung Exynos SoCs. Some important features
include:
* Fastboot: This is present to provide an open alternative to Samsung's
proprietary Odin protocol. The board file configures certain features
for fastboot, such as a dynamically allocated fastboot buffer, and
standardized (lowercase) partition aliases.
* EFI: Kernel image can be loaded from an EFI partition. This
adopts a standard booting process, which multiple OS distributions
can rely on.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
This pull request delivers a broad set of improvements across the
SoCFPGA family, including Agilex5, Cyclone V, SoC64, and common code.
Key updates include refined boot flows, new driver enablement, handoff
tooling enhancements, and several stability fixes.
Highlights:
* Agilex5:
- Enable FAT-based environment storage
- MMC driver restores legacy clkmgr-based clock lookup
- Cleanup of MMC raw mode enablement logic
* Cyclone V:
- SPL FAT boot support and updated bootcmd sequence
- Disable SPL SPI to prevent contention with FAT-based boot
- New board handoff script and BSP generator tooling
- Optimized Makefile support for SoCFPGA handoff workflows* New drivers:
- Cadence xSPI driver with full protocol and command support
- SPL enablement for DW APB GPIO controller
* Networking:
- xgmac MDIO now supports Clause 45 read/write operations
* NAND / SoC64:
- Enable ONFI detection in Denali NAND controller for SoC64 devices
* DTS and board updates:
- Sync common SoCFPGA U-Boot DTS with kernel sources
- Fixes for FPGA2SDRAM configuration and SoCFPGA boot stall behavior
- Vining_FPGA migrated to the modern LED framework
- Device tree relocation no longer forced off for Vining FPGA
* Tooling:
- Introduces a new Python-based Cyclone V BSP generator
covering EMIF, IOCSR, HPS, XML parsing, rendering, and documentation
to simplify board enablement and handoff regeneration workflows
Overall, this series improves boot robustness, enhances xSPI and MDIO
capabilities, modernizes board support, and introduces new tooling to
streamline SoCFPGA handoff generation.
Pipelines test passing
https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/28569
Greg MalysaandTom Rini
Utsav AgarwalandTom Rini
Yao ZiandTom Rini
Pranav TilakandTom Rini
Dominik HallerandTom Rini
Chintan VankarandTom Rini
Brian SuneandTom Rini
Linus WalleijandTom Rini
Francesco DolciniandHeinrich Schuchardt
Ilias ApalodimasandHeinrich Schuchardt
David LechnerandHeinrich Schuchardt
Heinrich SchuchardtandHeinrich Schuchardt
Sean AndersonandTom Rini
Chukun PanandTom Rini
Wolfgang WallnerandTom Rini
Hai PhamandMarek Vasut
Tuyen DangandMarek Vasut
Adriana NicolaeandTom Rini
Kaustabh ChakrabortyandMinkyu Kang
