Commit 76386d6195 ("arm: Remove cm_t35 board") removed support for the
board that was built when TARGET_CM_T35 is selected, but removal of the
symbol was forgotten, so let's fix this oversight.
While at it, update the README for omap3 to remove the last mention of
cm_t35.
Fixes: 76386d6195 ("arm: Remove cm_t35 board")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
The last user of coloured_LED_init has been recently removed, so we can
remove all places it's called and defined as it does nothing now.
Nobody makes use of the yellow and blue status LEDs from the legacy API,
so let's remove all references to it.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
The last CONFIG_MVS in code was removed almost 12 years ago in commit
3b98b57fa7 ("include: delete unused header files").
STATUS_LED_PAR was last seen 8 years ago when removed in commit
5b8e76c35e ("powerpc, 8xx: remove support for 8xx").
If CONFIG_LED_STATUS_BOARD_SPECIFIC is not defined, the build will fail
so we won't even reach this part of the code.
Let's simplify the if block to actually possible configurations.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
Many C unit tests are not executed if CONFIG_CONSOLE_RECORD is not set.
Hence Tom suggested to let UNIT_TEST imply CONSOLE_RECORD.
The first patch makes the skipped C unit tests visible.
The rest of the series deals with hidden bugs in our tests.
The 'fdt get value' command returned incorrect values on low-endian
systems. So this needed fixing too.
Link: https://lore.kernel.org/r/20251123225711.227016-1-heinrich.schuchardt@canonical.com
The cmd and the log test suites rely on CONFIG_CONSOLE_RECORD.
The log test suite is always built if CONFIG_UNIT_TEST=y.
The print_do_hex_dump test relies on CONFIG_HEXDUMP. Imply it too.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The 32bit cells of a device-tree property are big-endian. When printing
them via 0x08x we must first convert to the host endianness.
Remove the restriction to 20 bytes length. This would not allow to read an
SHA256 value.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
On the power architecture the bdinfo command prints architecture specific
information. The test needs to accept these output lines.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The original value of the first variable msr (0x200) is not controlled by
U-Boot. Don't make any assumption.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Hexdumps for types other then byte look different in dependence of the
endianness.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
If CONFIG_CONSOLE_RECORD_INIT_F=y we need additional memory according to
CONFIG_CONSOLE_RECORD_OUT_SIZE_F. Similarly CONFIG_SYS_MALLOC_LEN must be
increased by CONSOLE_RECORD_OUT_SIZE.
Go with the default values for CONFIG_CONSOLE_RECORD_INIT_F and
CONFIG_SYS_MALLOC_LEN.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The font test makes assumptions about video devices and selected fonts that
may not hold true on other configurations like qemu-x86_64_defconfig.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
If CONFIG_CONSOLE_RECORD_INIT_F=y we need additional memory according to
CONFIG_CONSOLE_RECORD_OUT_SIZE_F.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
256 GiB is the default memory size of the sandbox. But in our CI other
boards like qemu-x86_64_defconfig run with a different memory size.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Skipping to the line starting with tsc reaches the tsc_base output not the
final tsc output.
Expect all the X86 specific lines in the bdinfo output.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
On ARM the bdinfo command prints architecture specific information.
The test needs to accept these output lines.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We invoke the ut command in test_ut.py. Currently we only check for
failures. Instead we should also indicate if sub-tests were skipped.
With this change we will get output like the following for skipped tests:
test/py/tests/test_ut.py ..sssss......ss..............s.sssss.s.s...
================================ short test summary info ================================
SKIPPED [1] test/py/tests/test_ut.py:597: Test addrmap addrmap_test_basic has 1 skipped sub-test(s).
SKIPPED [1] test/py/tests/test_ut.py:597: Test bdinfo bdinfo_test_eth has 4 skipped sub-test(s).
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/28641
_ update LED management for STMicroelectronics boards
_ Add 1 GiB DRAM support for STM32MP13x DHCOR SoM
_ Fix 512 MiB DRAM support for STM32MP13x DHCOR SoM
_ Fix handling OPTEE in middle of the DRAM
_ Add missing debug UART build for STM32MP1 DHSOM
Remove get_led() and setup_led() which became obsolete since
led_boot_on() introduction. led_boot_on() is automatically called
from board_r.c
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Remove get_led() and setup_led() which became obsolete since
led_boot_on() introduction. led_boot_on() is automatically called
from board_r.c
Regarding "u-boot,error-led" property can't be used anymore since commit
Since commit 516a13e8db32 ("led: update LED boot/activity to new property implementation")
Instead get the LED labeled "red:status".
See kernel series: https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=1022570
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Commit c37a668481 ("stm32mp: fix compilation issue with DEBUG_UART")
split the debug UART initialization code into two files, but failed to
update other non-ST boards. This did not lead to noticeable breakage
until debug UART is enabled, which is not the default. Update the
Makefile accordingly to allow debug UART to work.
Fixes: c37a668481 ("stm32mp: fix compilation issue with DEBUG_UART")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add DRAM settings for 1 GiB variant of DH STM32MP13xx DHCOR SoM
and support for SoM DRAM coding HW straps decoding and automatic
DRAM configuration selection. Enable CONFIG_BOARD_EARLY_INIT_F on
all STM32MP1 DHSOM, as it is required for the HW straps decoding.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Update DRAM chip type and density comment for 512 MiB DRAM settings for
DH STM32MP13xx DHCOR DHSBC to match the chip on the SoM. No functional
change.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Quentin SchulzandTom Rini
Heinrich SchuchardtandTom Rini
Heinrich SchuchardtandTom Rini
Patrice Chotard
Simon GlassandPatrice Chotard
Marek VasutandPatrice Chotard