This patch moves the falcon mode handling logic out of
spl_ubi_load_image to spl_ubi_load_image_os, this allows for cleaner
handling for fallback to U-Boot in case falcon mode fails.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Currently the logic to handle falcon mode as well as the regular boot is
inside spl_mmc_do_fs_boot, this prevents us from cleanly extending
falcon mode functionality like toggleable fallback to U-Boot proper.
Therefore this patch splits the logic into spl_mmc_fs_load and
spl_mmc_fs_load_os to handle the regular boot and falcon mode use case.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
This patch adds the new SPL_OS_BOOT_SECURE symbol that enables secure
boot flow in falcon mode. This symbol can be used to disable certain
inherently insecure options during falcon boot.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
This reverts commit a040578d82.
Based on feedback other SOCs (for example Star64) are using driver in non
DMA mode which is causing issues that's why revert this patch.
cdns,is-dma should be removed differently.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reported-by: E Shattow <e@freeshell.de>
Pull request efi-2026-01-rc1
CI:
* https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/27944
Documentation:
* samsung: Extend E850-96 documentation to be comprehensive
* environment: fix links to Linux kernel documentation
* sandbox: fix typos
* document dmareset command
* ti: j722s_evm: drop outdated boot note
UEFI:
* Prevent leak of memory from tmp_files
* Correctly check if the HTTP protocol is found
* Use ESRT_FW_TYPE_SYSTEMFIRMWARE instead of ESRT_FW_TYPE_UNKNOWN
* dbginfodump: use guid definition
Others:
* lib/uuid: add support for efi debug image info table guid
The j722s_evm support is now largely complete and is certainly
not limited to UART boot so drop the confusing note from the docs.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Add the EFI Debug Image Info Table GUID to the translation table used by
uuid_guid_get_str().
This allows to print a human readable table name with `efidebug tables'
instead of "(unknown)".
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
We currently set the firmware image type to ESRT_FW_TYPE_UNKNOWN.
The spec defines the following:
ESRT_FW_TYPE_UNKNOWN 0x00000000
ESRT_FW_TYPE_SYSTEMFIRMWARE 0x00000001
ESRT_FW_TYPE_DEVICEFIRMWARE 0x00000002
ESRT_FW_TYPE_UEFIDRIVER 0x00000003
Since we don't support updating DEVICEFIRMWARE or UEFIDRIVER types,
let's switch over to SYSTEMFIRMWARE which seems more appropriate.
Suggested-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
In function efi_http_service_binding_destroy_child() phandler is created as
as a local variable. If efi_search_protocol() fails, phandler will hold a
random value from the stack. Even it is not zero, we must not use it.
If efi_search_protocol() succeeds, the pointer has already be dereferenced,
so checking against NULL makes not sense here.
If ChildHandle is not a valid UEFI handle, we must return
EFI_INVALID_PARAMETER.
Use a single location for EFI_EXIT().
Addresses-Coverity-ID: CID 531974 (Unchecked return value)
Fixes: 5753dc3f65 ("efi_loader: Prevent dereference of uninitialised variable")
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
After the malloc of tmp_files and before its value is recorded an early
exit will need to free tmp_files to prevent leaking that memory.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Add more bootloading details for E850-96 board. New sections cover next
topics:
- Hardware configuration of the boot device
- Flashing and updating the software (multiple methods)
- Booting with Standard Boot (multiple methods)
- EFI System Partition structure for E850-96
- Loadable firmware (LDFW) note
- Ethernet and USB Host Support
That documents all recently enabled U-Boot features for E850-96, which
can hopefully make U-Boot more useful for the users and developers of
this platform.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
After calling a function that can return an error, the test to detect
that error should use the return value not a different variable. Fix it.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Fixes: f676b45151 ("fs: Add semihosting filesystem")
As requirement of CR side, QSPI Flash usage via RPC driver shall
be disabled and leaving the control of this module to CR side.
Perform DT modification to disable the RPC SPI.
Signed-off-by: Nguyen Tran <nguyen.tran.pz@bp.renesas.com>
Reviewed-by: Khanh Le <khanh.le.xr@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Do not modify defconfig, modify the DT instead, this way
the RPC SPI can be enabled without recompiling the U-Boot
itself. Update commit message accordingly.]
Commit 63da3a795e ("ARM: dts: renesas: Drop R8A779H0 V4M DTs with OF_UPSTREAM counterparts")
removed unnecessary V4H DTs from arch/arm/dts , but in the process
also incorrectly dropped the -u-boot.dtsi U-Boot extras. Reinstate
those extras.
Due to DT file name change for the R8A779H0 V4M Gray Hawk, update
the r8a779h0-gray-hawk-u-boot.dtsi filename to newly matching
r8a779h0-gray-hawk-single-u-boot.dtsi .
Align r8a779h0-u-boot.dtsi with clean up commits
1487c34efa ("arm64: dts: renesas: Deduplicate extalr_clk bootph-all")
dd8f57ed2f ("ARM: dts: renesas: Drop most of bootph-* tags")
Fixes: 63da3a795e ("ARM: dts: renesas: Drop R8A779H0 V4M DTs with OF_UPSTREAM counterparts")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The HSCIF RX FIFO may overflow when data are streaming from remote end
into the HSCIF while U-Boot is still starting up. In that case, HSFSR
bit RDF is set, but HSFDR field R is zero. This confuses .tstc callback
into considering RX FIFO to be empty, which leads to .getc to be never
invoked, even when user attempts to pass more input onto the command
line.
Fix this by considering the RDF flag in serial_rx_fifo_level(), which
is called from .tstc in case of no errors. If RDF flag is set, trigger
the .getc callback and let it clear the RX FIFO.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Fully reset both PCIe controllers before booting the next stage on
Retronix R-Car V4H Sparrow Hawk board. This is necessary especially
in case U-Boot brought up the PCIe controllers, at which point the
next stage might be confused by the state of the PCIe controller.
The reset has to happen this late and not in the PCIe controller
driver, because the SRCR11 bits seem to affect both controllers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
In case the link is down, or the controller driver is removed before
booting the next stage, shut down the PCIe link, put both the remote
PCIe device and the controller into reset, and disable clock. This
way, the hardware is not left active when not in use.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
During led_init() execution, led_get_label() returns either the label
property (which is an obsolete property [1]) or the LED's node name.
It can't be the function name as dev parameter is NULL.
Later, during led_post_bind() execution, for the same LED, the attributed
label by led_get_label() can be the function name, as led_get_label()
dev's parameter is set.
During call sequence led_boot_on() => led_boot_get() => led_get_by_label()
with label given in parameter (priv->boot_led_label which is either the
label or node's name set previously in led_init()) can be different to
to uc_plat->label and returns -ENODEV.
Update led_get_by_label() to allow to retrieve LED also by its node name.
[1] https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Our pytest package was pinned to a release from 2021. The minimum
compatible with labgrid v25.0.x is pytest 7.0.0. Update to the current
relase which is currently 8.4.2
Signed-off-by: Tom Rini <trini@konsulko.com>
The EFI secure boot tests install a security data base.
Other EFI tests assume that secure boot is not enabled.
Add the missing tear-down at the end of each secboot test sequence.
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Tom Rini <trini@konsulko.com>
With commit c85b8071e7 ("virtio: blk: support block sizes exceeding 512
bytes") logic was added to detect the VIRTIO_BLK_F_BLK_SIZE capability and
to copy the block size reported by QEMU to the block device descriptor.
The logical block size can be set when invoking QEMU:
-drive if=none,file=4096.img,format=raw,id=vda \
-device virtio-blk-device,drive=vda,physical_block_size=4096,logical_block_size=4096
In U-Boot the logical block size is shown by command `virtio info`:
=> virtio info
Device 0: QEMU VirtIO Block Device
Type: Hard Disk
Capacity: 1024.0 MB = 1.0 GB (262144 x 4096)
There where two flaws which together hid that the logic was incorrect:
* VIRTIO_BLK_F_BLK_SIZE was missing in the driver capabilities and the bit
was filtered out.
* The result of the call to virtio_has_feature() was negated.
The problem became apparent when using ARM FVP as emulator which does not set
VIRTIO_BLK_F_BLK_SIZE.
Fixes: c85b8071e7 ("virtio: blk: support block sizes exceeding 512 bytes")
Reported-by: Debbie Horsfall <debbie.horsfall@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Falcon mode uses falcon_image_file from the env during mmc fs boot, but
external env can be compromised. Therefore disable access to external
env by setting SPL_ENV_IS_NOWHERE when SPL_OS_BOOT_SECURE is set.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The pointer resp is declared but never assigned a value but is then
dereferenced. Fix this by assigning the pointer to the message buffer.
This issue was found by Smatch.
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Anshul Dalal <anshuld@ti.com>
In ti_sci_get_response the check for message sequence will return ret
on a fail but ret will be 0 at that point. Instead return -EINVAL.
Also change dev_dbg call to dev_err to be consistent with other error
detection code in the same function.
This issue was found by Smatch.
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Anshul Dalal <anshuld@ti.com>
temp is assigned the pointer returned by malloc which is used without a
NULL check and then never freed. Add a NULL check and ensure temp is
freed on all return paths.
This issue was found by Smatch.
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Anshul Dalal <anshuld@ti.com>
The cv1800b_clk_setfield function returns void, but was doing "return
writel(...);" and while seemingly having a void function return a void
function is not a warning, when readl is a macro this problem is shown.
Correct the code to instead simply call writel.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Yao Zi <ziyao@disroot.org>
The WDT_DAVINCI driver is not safe to compile on 64bit platforms such as
allyesconfig on a 64bit host. Tighten the dependencies here to the
platforms which could use it today.
Signed-off-by: Tom Rini <trini@konsulko.com>
A few watchdog drivers cannot build without access to some platform
specific header files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
Introduce a new version of the Keystone-II "ddr" command for testing the
inline ECC support in the DDRSS bridge available on K3 devices. The ECC
hardware support in K3's DDRSS and the test method differ substantially
from what we support in the K2 variant of the command. This K3 DDRSS
command currently supports only single controller testing.
The ECC error injection procedure follows these steps:
1) Flush and disable the data cache.
2) Disable the protected ECC Rx range.
3) Flip a bit in the address.
4) Restore the range to original.
5) Read the modified value (corrected).
6) Re-enable the data cache.
This will cause the 1-bit ECC error count to increase while the read
will return the corrected value.
The K3 version of the command extends the syntax for the "ecc_err"
argument by also introducing an argument for range which specifies which
range (0, 1, 2) the address is located in.
Multi-bit ECC errors are uncorrectable and will lead to a synchronous
abort.
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
[n-francis@ti.com: Add J7 and multiple-region support, simplify logic]
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
This partly fix commit 726404a66c ("airoha: rework RAM size handling
to support multiple RAM size")
The function get_effective_memsize() do not see non-global defines
of CFG_MAX_MEM_MAPPED, so the effective memory size will not be changed.
Fix the issue by putting definition of CFG_MAX_MEM_MAPPED to the proper
place.
Fixes: 726404a66c ("airoha: rework RAM size handling to support multiple RAM size")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
expo and cedit tests depend on the host having the SDL library.
Build these tests only if VIDEO_SANDBOX_SDL config is enabled.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Enable CONFIG_OF_UPSTREAM to receive automatic
device tree updates for the Verdin AM62P.
Remove the now-obsolete device tree files:
- k3-am62p-verdin.dtsi
- k3-am62p-verdin-dev.dtsi
- k3-am62p-verdin-wifi.dtsi
- k3-am62p5-verdin-wifi-dev.dts
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
In ut_report() there is a null check for stats but stats was already
dereferenced on the line before and is again dereferenced later in the
same function. Also the two places where ut_report() is called from will
have initialised the parameter so there is no chance that stats will be
null. So to prevent static analysis complaining of a use before check
just remove the check.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Anshul DalalandTom Rini
Michal SimekandTom Rini
Peter RobinsonandHeinrich Schuchardt
Vincent StehléandHeinrich Schuchardt
Mattia NarducciandHeinrich Schuchardt
Ilias ApalodimasandHeinrich Schuchardt
Lukas ZirpelandHeinrich Schuchardt
Brian SuneandHeinrich Schuchardt
Andrew GoodbodyandHeinrich Schuchardt
Sam ProtsenkoandHeinrich Schuchardt
Nguyen TranandMarek Vasut
Yegor YefremovandTom Rini
Patrice ChotardandTom Rini
Raymond MaoandTom Rini
Yao ZiandLeo Yu-Chi Liang
Abbarapu Venkatesh YadavandTom Rini
Mikhail KshevetskiyandTom Rini
Georgi VlaevandTom Rini
Kory MaincentandTom Rini
Ernest Van HoeckeandTom Rini