vhaudiquet/u-boot-krane
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
102,415 Commits 4 Branches 0 Tags
2faabff35899a2106dc0480bd482783e906c8b7d
Commit Graph
102415 Commits
This Branch
This Branch
All Branches
Author SHA1 Message Date
Stephan GerholdandTom Rini 2faabff358 usb: host: ehci-msm: Disable clocks after all register accesses 
We need the USB clocks to do accesses like
  wait_for_bit_le32(&ehci->usbcmd, CMD_RESET, ...)
so we should disable them only after all of them are done.

At the moment this works only because the clock driver doesn't actually
disabling these clocks in U-Boot.

Fixes: 9b3a9f896e ("ehci: msm: bring up iface + core clocks")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: Sam Day <me@samcday.com>
Link: https://patch.msgid.link/20250407-ehci-msm-fixes-v1-3-f8b30eb05d07@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
 2025-10-30 11:04:51 -06:00
Stephan GerholdandTom Rini e4e47da7e8 usb: host: echi-msm: Drop ulpi definitions 
These are unused.

Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: Sam Day <me@samcday.com>
Link: https://patch.msgid.link/20250407-ehci-msm-fixes-v1-2-f8b30eb05d07@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
 2025-10-30 11:04:51 -06:00
Stephan GerholdandTom Rini fef8c84b57 usb: host: ehci-msm: Fix pointer check 
dev_read_addr_ptr() returns a null pointer on error, not FDT_ADDR_T_NONE.

Fixes: 2be1130a93 ("usb: ehci-msm: Use dev interface to get device address")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: Sam Day <me@samcday.com>
Link: https://patch.msgid.link/20250407-ehci-msm-fixes-v1-1-f8b30eb05d07@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
 2025-10-30 11:04:51 -06:00
Casey ConnollyandTom Rini cd44b44e59 configs: qcom_*: enable QCOM_GENI where needed 
Enable the GENI MISC driver which is required for many Qualcomm
platforms.

Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://patch.msgid.link/20250714-geni-load-fw-v5-8-5abbc0d29838@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-30 11:04:51 -06:00
Casey ConnollyandTom Rini 3a65430b54 serial: msm-geni: implement firmware loading 
Teach the GENI UART driver to load firmware, similar to i2c.

This is primarily intended for non-debug UARTs, but since we don't
support using these as the console we abort probe for now.

Remove duplicated register macros that are in the common geni-se header.

Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://patch.msgid.link/20250714-geni-load-fw-v5-7-5abbc0d29838@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-30 11:04:51 -06:00
Stephen BoydandTom Rini c57419811a serial: msm-geni: Enable SE clk in probe 
Enable the serial engine clk in probe so that this driver can work on
platforms that don't already initialize the clk for this device before
this driver runs. This fixes a problem I see on Coreboot platforms like
Trogdor where the UART hardware isn't enabled by coreboot unless the
serial console build is used.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://patch.msgid.link/20250714-geni-load-fw-v5-6-5abbc0d29838@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-30 11:04:51 -06:00
Casey ConnollyandTom Rini 9887944c4f clk/qcom: sc7280: add uart5 and uart7 clocks 
Allow us to power up UART7 so we can load the QUP firmware, this is used
for bluetooth on RB3 Gen 2 and possibly other boards.

Additionally add the UART5 clocks so we can adjust baud rate for UART

Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://patch.msgid.link/20250714-geni-load-fw-v5-5-5abbc0d29838@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-30 11:04:51 -06:00
Casey ConnollyandTom Rini 10f28bc7ae i2c: geni: load firmware if required 
Load firmware for the peripheral if necessary.

Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250714-geni-load-fw-v5-4-5abbc0d29838@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-30 11:04:51 -06:00
Casey ConnollyandTom Rini b95df6ed8c misc: introduce Qcom GENI wrapper 
Qualcomm peripherals like UART, SPI, I2C, etc are all exposed under a
common GENI Serial Engine wrapper device. Replace the stub driver we use
for this currently with a full-on misc device and implement support for
loading peripheral firmware.

Each of the peripherals has it's own protocol-specific firmware, this is
stored on the internal storage of the device with a well-known partition
type GUID.

To support this, GENI will bind peripherals in two stages. First the
ones that already have firmware loaded (such as the serial port) are
bound in the typical way. But devices that require firmware loading are
deferred until EVT_LAST_STAGE_INIT. At this point we can be sure that
the storage device is available, so we load the firmware and then bind
and probe the remaining children.

Child devices are expected to determine if firmware loading is necessary
and call qcom_geni_load_firmware().

Since Linux currently doesn't support loading firmware (and firmware may
not be available), we probe all GENI peripherals to ensure that they
always load firmware if necessary.

Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://patch.msgid.link/20250714-geni-load-fw-v5-3-5abbc0d29838@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-30 11:04:51 -06:00
Casey ConnollyandTom Rini f3e73dc94b i2c: geni: fix error message wording in clk_disable 
Correct the error messages so they accurately describe that we failed to
disable the clocks, not to enable them.

Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250714-geni-load-fw-v5-2-5abbc0d29838@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-30 11:04:51 -06:00
Casey ConnollyandTom Rini ada314a7ca configs: qualcomm: use fragments for debug UART 
The QCM6490 and QCS9100 targets always enable debug UART, but this is
not really optimal for typical users.

Move these debug UART options to config fragments so that they aren't
enabled by default.

Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250722-b4-qcom-tooling-improvements-v5-6-df143f1247fc@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-30 11:04:51 -06:00
Jens ReidelandTom Rini 077ae372da clk/stub: add sc7180-rpmh clock 
Stub the RPMh clock controller on SC7180.

Signed-off-by: Jens Reidel <adrian@mainlining.org>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250826231752.60633-1-adrian@mainlining.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-30 11:04:51 -06:00
Danila TikhonovandTom Rini 30eb854a56 configs: qcom_defconfig: Enable SM7150 GCC and Pinctrl 
Enable the necessary drivers so that SM7150 devices can boot with
qcom_defconfig.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250831004602.699953-5-adrian@mainlining.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-30 11:04:27 -06:00
Danila TikhonovandCasey Connolly 3a44e56290 phy: qcom-qmp-ufs: Import SM7150 tables from Linux 
Import the init sequence for the UFS on SM7150.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250831004602.699953-4-adrian@mainlining.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Danila TikhonovandCasey Connolly 23fc229eb4 pinctrl: qcom: add SM7150 pinctrl driver 
This SoC features a pinctrl block with north, south, and west tiles
accessible to the AP.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Co-developed-by: Jens Reidel <adrian@mainlining.org>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250831004602.699953-3-adrian@mainlining.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Danila TikhonovandCasey Connolly 834cbecce7 clk/qcom: add driver for SM7150 GCC 
Add a clock driver for the SM7150 SoC. This driver can enable necessary
clocks for UART, UFS, USB, and MMC.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Co-developed-by: Jens Reidel <adrian@mainlining.org>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250831004602.699953-2-adrian@mainlining.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Stephan GerholdandCasey Connolly ff70183785 serial: msm: Use single character mode 
The UART DM controller supports different channel data packing modes,
either the 4-character packing mode (where 32-bit are read/written at once)
or the single-character mode (where only a single character is read/written
at a time). The 4-character mode can be more efficient, but the
single-character mode is much easier to implement.

At the moment, serial_msm uses the 4-character mode. Since the
dm_serial_ops operate on one character at the time, the code goes through
quite some hoops in order to break this down to single characters. This
code is prone to race conditions (e.g. priv->chars_cnt is read from the
registers, then a command is issued, what if another char came in
inbetween?). It also seems to cause another subtle issue with autoboot:

Unlike the previous autoboot failures that happened when UART was
disconnected, this problem occurs when UART is connected and open in a
terminal: For EFI boot, the console size is queried in efi_console.c
query_console_serial() by sending an ANSI escape code via UART. For some
reason, with the current driver we get yet another 0x00 byte (UART break
event?) when reading the reply from serial input. Because of that, reading
the console size fails in efi_console.c, the actual reply remains in the
UART buffer, and later the boot flow aborts because it detects input after
printing a prompt.

Rather than trying to fix the issue in the current complicated approach,
switch the driver to use the single-character mode. This is simple and
straightforward to implement without race conditions:

 - We write one character at a time to UARTDM_TF, as long as the TX FIFO
   has space available (TX_READY). To flush the console before starting
   Linux, we wait for TX_EMPTY.

 - We read one character at a time from UARTDM_RF and strip off the
   additional error information (assuming there is something in the
   RX FIFO, as indicated by RX_READY).

In this mode, querying the serial console size works and autoboot is no
longer interrupted. The overall code is also much shorter.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Alexey Minnekhanov <alexeymin@minlexx.ru>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908-db410c-autoboot-fixes-v2-6-316ed98e0143@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Stephan GerholdandCasey Connolly 5b83a081a7 serial: msm: Re-enable after resetting 
The documentation for the UART controller in the APQ8016E specifies that
both RESET and ENABLE commands must be issued to set up the receiver and
transmitter, but at the moment we only issue RESET. This doesn't seem to
cause issues in practice (looks like the reset already re-enables the
receiver/transmitter), but let's add the two writes to RX_ENABLE/TX_ENABLE
to better match the recommendations in the documentation.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Alexey Minnekhanov <alexeymin@minlexx.ru>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908-db410c-autoboot-fixes-v2-5-316ed98e0143@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Stephan GerholdandCasey Connolly eac35b9027 serial: msm: Reset after writing to DMEN 
According to the documentation of the UART controller in the APQ8016E TRM,
clearing bits inside UARTDM_DMEN requires resetting the transmitter and/or
receiver. We do reset inside uart_dm_init(), but before writing to
UARTDM_DMEN. This doesn't seem to cause problems in practice, but let's
move the reset to the end of uart_dm_init() to better match the
recommendations in the documentation.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Alexey Minnekhanov <alexeymin@minlexx.ru>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908-db410c-autoboot-fixes-v2-4-316ed98e0143@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Stephan GerholdandCasey Connolly a8f5b34ec5 serial: msm: Cleanup register naming 
Some of the register definitions are inconsistently named (likely copied
as-is from Qualcomm's Little Kernel/LK bootloader, which uses the
MSM_BOOT_UART naming scheme). Rename them to be in line with the other
register definitions and move them up to be next to the related register.

No functional change.

Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Alexey Minnekhanov <alexeymin@minlexx.ru>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908-db410c-autoboot-fixes-v2-3-316ed98e0143@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Stephan GerholdandCasey Connolly 080d19b6e6 Revert "serial: serial_msm: Delay initialization to let pins stabilize" 
There have been issues with autoboot on DB410c for years, where autoboot
gets interrupted by spurious input on the UART console. Back in 2021, I've
tried to fix this by inserting a delay before UART initialization, but it
has turned out this is not working reliably either.

It looks like the root cause has always been the lack of bias-pull-up,
which was causing the RX line to be floating when UART is disconnected.
The delay does not seem to be needed anymore when applying bias-pull-up,
so drop it again in favor of the proper fix.

This reverts commit ad7e967738.

Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Alexey Minnekhanov <alexeymin@minlexx.ru>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908-db410c-autoboot-fixes-v2-2-316ed98e0143@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Stephan GerholdandCasey Connolly 4e26c1e2fa board: dragonboard410c: Drop now unneeded bootph-all for console 
This is applied for all devices upstream in Linux now (when using the
console-specific pinctrl templates).

Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Alexey Minnekhanov <alexeymin@minlexx.ru>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908-db410c-autoboot-fixes-v2-1-316ed98e0143@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Alexey MinnekhanovandCasey Connolly c293827081 qcom_defconfig: Enable pinctrl driver for SDM630/660 
Pin controller driver for SDM630/636/660 SoCs was added in
b4420a0c9e ("drivers: pinctrl: Add Qualcomm SDM630/660 TLMM driver"),
but not enabled in qcom_defconfig. Correct that omission.

Signed-off-by: Alexey Minnekhanov <alexeymin@minlexx.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250914145620.1962735-1-alexeymin@minlexx.ru
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly dcc5a60745 gpio: qcom: Support GPIOs on PM7325 PMIC 
The GPIOs on PM7325 work fine using the qcom_spmi_gpio driver and
enables the use of the Volume Up button Fairphone 5 smartphone.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250917-spmi-gpio-pm7325-v1-1-6b75c2c62d8b@fairphone.com
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly efbdf3dbb0 board/qualcomm: add debug config fragment for SM6350 
Add a fragment similar to others to enable earlycon.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly 9049b05a6e qcom_defconfig: Enable SM6350 clock and pinctrl drivers 
Enable the drivers so that SM6350 devices can boot with qcom_defconfig.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly 8f12776f1b gpio: qcom: Support GPIOs on PM6350 PMIC 
The GPIOs on PM6350 work fine using the qcom_spmi_gpio driver and
enables the use of the Volume Up button Fairphone 4 smartphone.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly a6b78ac5d0 regulator: qcom-rpmh-regulator: add support for pm6150l regulators 
Add the pm6150l regulator data found on the Qualcomm SM6350 platform.
The tables are imported from the Linux driver. The SMPS regulators were
not added now.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly a206bd063b phy: qcom: Add SM6350 to QMP UFS PHY driver 
The UFS on SM6350 can reuse the SDM845 configuration, just like in
Linux.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly 11003e4780 iommu: qcom-smmu: Add qcom,sm6350-smmu-500 compatible 
This SoC doesn't have the generic compatible.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly 5af87d8088 drivers: pinctrl: Add Qualcomm SM6350 TLMM driver 
Add support for TLMM pin controller block (Top Level Mode Multiplexer)
on SM6350 SoC, with support for special pins.

Correct pin configuration is required for working debug UART and eMMC/SD
cards.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly 4ca964ac8c clk/stub: add sm6350-rpmh clock 
Stub the RPMh clock controller on SM6350.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly 4bae582792 clk/qcom: Add SM6350 clock driver 
Add Clock driver for the GCC block found in the SM6350 SoC.

Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
 2025-10-29 12:27:33 +01:00
Paul SajnaandCasey Connolly 1cab8d1e22 qcom_defconfig: enable watchdog command 
CONFIG_WDT and CONFIG_WDT_QCOM were previously added in
https://source.denx.de/u-boot/u-boot/-/commit/530764de9fc8539cd2354501e9c42804bc4c4dac

U-Boot and Linux pet the watchdog by default,
but it's helpful to also have the command to control the watchdog,
(CONFIG_CMD_WDT)
so it can be manually disabled by the user, for example, if the kernel
is expected to stall during debugging with kgdb.

Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250923-qcom_config_enable_cmd_wdt-v1-1-70cccf9f01e3@postmarketos.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly 202f5975c2 board/qualcomm: add debug config fragment for MSM8953 
Add a fragment similar to others to enable earlycon.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250924-2025-10-misc-v1-5-7e75842ca714@fairphone.com
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly 759646df3a doc: board/qualcomm: Clean up debug options for QUP UART 
CONFIG_BAUDRATE is not relevant for the QUP driver, and neither is
CONFIG_DEBUG_UART_SKIP_INIT so remove them from the doc.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250924-2025-10-misc-v1-4-7e75842ca714@fairphone.com
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly beaabce9cc serial: msm-geni: Update kconfig name for DEBUG_UART_MSM_GENI 
The previous description "Qualcomm snapdragon" barely tells the user
anything, update the name so that it's clear which configs the user can
choose between, namely the older QUP driver, or the newer GENI driver.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250924-2025-10-misc-v1-3-7e75842ca714@fairphone.com
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly 43a2fc67d3 clk/qcom: sm8250: Remove unused defines 
Clean up some defines which are not used in the driver.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250924-2025-10-misc-v1-2-7e75842ca714@fairphone.com
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
Luca WeissandCasey Connolly e4b35d364e pinctrl: qcom: sc7280: Fix offset of UFS_RESET 
There's no WEST, SOUTH or NORTH in sc7280 pinctrl. Fix the offset of the
ufs_reset pin.

Fixes: 51ec7fdb64 ("pinctrl: qcom: add sc7280 pinctrl driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250924-2025-10-misc-v1-1-7e75842ca714@fairphone.com
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
David WronekandCasey Connolly 731dc5eb95 gpio: qcom_spmi: add pm660l 
This is used for the volume keys on some SDM670 devices.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: David Wronek <david.wronek@mainlining.org>
Link: https://lore.kernel.org/r/20251003-sdm670-v2-5-52c0fa481286@mainlining.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
David WronekandCasey Connolly 4cebdcae35 qcom_defconfig: enable pinctrl for sdm670 
Enable the SDM670 pinctrl driver.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: David Wronek <david.wronek@mainlining.org>
Link: https://lore.kernel.org/r/20251003-sdm670-v2-4-52c0fa481286@mainlining.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:33 +01:00
David WronekandCasey Connolly f977cee372 pinctrl: qcom: add sdm670 pinctrl driver 
Add a pinctrl driver for the TLMM block found in the SDM670 SoC.

Signed-off-by: David Wronek <david.wronek@mainlining.org>
Link: https://lore.kernel.org/r/20251003-sdm670-v2-3-52c0fa481286@mainlining.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:32 +01:00
David WronekandCasey Connolly 8111e1357e clk/qcom: sdm845: add support for sdm670 
The global clock controller on SDM670 is similar to SDM845, so let's add
support here.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: David Wronek <david.wronek@mainlining.org>
Link: https://lore.kernel.org/r/20251003-sdm670-v2-2-52c0fa481286@mainlining.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:32 +01:00
David WronekandCasey Connolly 0e59113025 clk/stub: add sdm670 rpmh clock 
Necessary for MMC to successfully probe all clocks.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: David Wronek <david.wronek@mainlining.org>
Link: https://lore.kernel.org/r/20251003-sdm670-v2-1-52c0fa481286@mainlining.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:32 +01:00
Tom RiniandCasey Connolly 603b45b0f1 phy: qcom: Rework Kconfig logic around MSM8916_USB_PHY 
This PHY driver is required by USB_EHCI_MSM and not useful on its own.
Rather than have it be a prompted option, it should (and currently is)
select'd by USB_EHCI_MSM. Remove the prompt for this option and then
correct the dependency chain (it must select PHY).

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20251003203927.1030052-1-trini@konsulko.com
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:32 +01:00
Jens ReidelandCasey Connolly bf83c6036e gpio: qcom: qcom_spmi_gpio: add compatible for pm6150l 
Add support for the GPIOs in the PM6150L to the new driver.

Signed-off-by: Jens Reidel <adrian@mainlining.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20251005154443.71477-1-adrian@mainlining.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:32 +01:00
Abbarapu Venkatesh YadavandCasey Connolly e51d4d23c7 qcom_defconfig: Enable meminfo command with mapping 
Enable meminfo command to be able to see where things are mapped.

Signed-off-by: Abbarapu Venkatesh Yadav <venkyada@qti.qualcomm.com>
Link: https://lore.kernel.org/r/20251010051200.2313081-1-venkyada@qti.qualcomm.com
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
 2025-10-29 12:27:32 +01:00
Raymond MaoandTom Rini 4cad9faf8d MAINTAINERS: update my email address 
Update my email address in the maintainers list.

Signed-off-by: Raymond Mao <raymondmaoca@gmail.com>
 2025-10-28 14:37:25 -06:00
Tom Rini 9ed8fafbcd Revert "clk: Return value calculated by ERR_PTR" 
This reverts commit 644b4650ee.

While the intention of the above commit is correct, it leads to test
failures in CI that need to be addressed at the same time.

Signed-off-by: Tom Rini <trini@konsulko.com>
 2025-10-28 13:27:27 -06:00
Tom Rini 80a3c2fda2 spi: altera_spi: Add missing <time.h> to altera_spi.c 
This driver references the get_timer macro while relying on an
indirection inclusion of <time.h>. Add the missing include directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
 2025-10-28 12:53:58 -06:00