Multiple cleanups and improvements

- Cleanup exception trigger code
- Cleanup division to divide by 0
- Cleanup SRET code
- Cleanup CSR code
- Added interrupts
- Added TIMER interrupt

src/cpu/csr.c

@@ -5,7 +5,7 @@ uint32_t csr_read(struct RV32_CPU* cpu, uint32_t csr)
 {
 	switch(csr)
 	{
-        case CSR_TIME:
+		case CSR_CYCLE:
 			return cpu->sim_ticks_done;
 			break;
 		default:

src/cpu/exception.c

@@ -2,7 +2,7 @@
 
 #include <stdio.h>
 
-void exception_trigger(rv32_cpu_t* cpu, uint32_t scause)
+void exception_trigger(rv32_cpu_t* cpu, uint32_t scause, uint32_t tval)
 {
 	// An exception can only be triggered by the CPU itself,
 	// so we know we already own the mutex
@@ -12,14 +12,38 @@ void exception_trigger(rv32_cpu_t* cpu, uint32_t scause)
 	// To achieve that, we can just call cpu_loop (noreturn)
 	// at the end of this function
 
-    // Save execution context, so that 'mret/sret/..' can restore it
+	// Exceptions cannot be disabled
-    // TODO
 
-    // Set PC to STVEC, and set SCAUSE
+	// Set xCAUSE : exception cause, with interrupt bit set to null
-    // TODO: If PC cannot be mmu_resolved, throw a 'double fault' ?
-    cpu->pc = cpu->csr[CSR_STVEC];
 	cpu->csr[CSR_SCAUSE] = scause;
 
+	// Save previous interrupt enable in xSTATUS.xPIE
+	if(cpu->csr[CSR_SSTATUS] & 0b10U)
+		cpu->csr[CSR_SSTATUS] |= 0x80;
+
+	// Set previous privilege mode in xSTATUS.xPP
+    // TODO
+
+	// Unset SIE (interrupt enable) bit
+	cpu->csr[CSR_SSTATUS] &= ~0b10U;
+
+	// Set privilege mode for exception handling, checking for delegation
+    // TODO
+
+	// Set xTVAL, exception-specific information related to xCAUSE
+	cpu->csr[CSR_STVAL] = tval;
+
+	// Set SEPC to instruction that caused exception
+	cpu->csr[CSR_SEPC] = cpu->pc;
+
+	// Set PC to xTVEC : exception handling code
+	// xTVEC: [Base(30bits) Mode(2 bits)], address 4-byte aligned in base
+	// Exceptions are not vectored (we can safely ignore mode)
+	cpu->pc = cpu->csr[CSR_STVEC] & 0xFFFFFFFC;
+
+    // Unlock cpu mutex, cpu_loop will lock it just after
 	pthread_mutex_unlock(&cpu0_mutex);
+
+    // cpu loop (attribute noreturn should erase previous stack)
 	cpu_loop(cpu);
 }

src/cpu/exception.h

@@ -3,7 +3,7 @@
 
 #include "rv32cpu.h"
 
-void exception_trigger(rv32_cpu_t* cpu, uint32_t scause);
+void exception_trigger(rv32_cpu_t* cpu, uint32_t scause, uint32_t tval);
 
 #define SCAUSE_INSTRUCTION_MISSALIGNED 0x0
 #define SCAUSE_INSTRUCTION_ACCESS_FAULT 0x1

src/cpu/interrupt.c

@@ -0,0 +1,87 @@
+#include "interrupt.h"
+#include "rv32cpu.h"
+
+#include <stdio.h>
+#include <unistd.h>
+
+void interrupt_trigger(rv32_cpu_t* cpu, uint32_t scause)
+{
+	// Make sure that interrupts are enabled
+	if(cpu->privilege_mode == MACHINE)
+	{
+		// In machine mode, we check mstatus.sie (bit 1)
+		if(!(cpu->csr[CSR_MSTATUS] & 0b10))
+			return;
+	}
+	else if(cpu->privilege_mode == SUPERVISOR)
+	{
+		// In supervisor mode, we check sstatus.sie (bit 1)
+		if(!(cpu->csr[CSR_SSTATUS] & 0b10))
+			return;
+	}
+	else
+	{
+		// TODO
+		fprintf(stderr, "interrupt_trigger in non M/S-mode not implemented yet\n");
+		exit(EXIT_FAILURE);
+	}
+
+	// An interrupt can only be triggered from outside
+	// of the cpu, so we are on a different thread
+	// and we don't already own the CPU mutex
+	// We obtain in this thread the control of the CPU,
+	// but we know it is not in the middle of an instruction
+	// (we got the mutex) ; this way we can just change
+	// registers to set interrupt handler execution
+	pthread_mutex_lock(&cpu0_mutex);
+
+	// Set xCAUSE with interrupt bit set
+	cpu->csr[CSR_SCAUSE] = 0x80000000 | scause;
+
+	// Set xSTATUS.xPIE (previous interrupt enable) bit
+	cpu->csr[CSR_SSTATUS] |= 0x80;
+
+	// Set xSTATUS.xPP (Previous Privilege) bit
+
+	// Unset xSTATUS.xIE (interrupt enable) bit
+	cpu->csr[CSR_SSTATUS] &= ~0b10U;
+
+	// Set xEPC : PC at interruption
+	cpu->csr[CSR_SEPC] = cpu->pc;
+
+	// Set PC to xTVEC : exception handler code
+	// xTVEC: [Base(30bits) Mode(2 bits)], address 4-byte aligned in base
+	// Interrupts can be vectored, if mode == 1, then pc = xTVEC + scause * 4
+	int mode = cpu->csr[CSR_STVEC] & 0b11;
+	switch(mode)
+	{
+		case 0:
+			cpu->pc = cpu->csr[CSR_STVEC] & 0xFFFFFFFC;
+			break;
+		case 1:
+			cpu->pc = (cpu->csr[CSR_STVEC] & 0xFFFFFFFC) + scause * 4;
+			break;
+		default:
+			fprintf(stderr, "interrupt_trigger: invalid mode encountered in sTVEC register\n");
+			exit(EXIT_FAILURE);
+			break;
+	}
+
+	pthread_mutex_unlock(&cpu0_mutex);
+}
+
+void interrupt_timer_thread()
+{
+	while(1)
+	{
+		cpu0->csr[CSR_TIME]++;
+		interrupt_trigger(cpu0, SCAUSE_SUPERVISOR_TIMER_INTERRUPT);
+		usleep(1);
+	}
+}
+
+void interrupt_timer_setup()
+{
+	pthread_t timer_thread;
+	pthread_create(&timer_thread, 0, (void*) interrupt_timer_thread, 0);
+}

src/cpu/interrupt.h

@@ -0,0 +1,15 @@
+#ifndef INTERRUPT_H
+#define INTERRUPT_H
+
+#include <stdint.h>
+
+#include "rv32cpu.h"
+
+#define SCAUSE_SUPERVISOR_SOFTWARE_INTERRUPT 0x1
+#define SCAUSE_SUPERVISOR_TIMER_INTERRUPT 0x5
+#define SCAUSE_SUPERVISOR_EXTERNAL_INTERRUPT 0x9
+
+void interrupt_trigger(rv32_cpu_t* cpu, uint32_t scause);
+void interrupt_timer_setup();
+
+#endif

src/cpu/rv32cpu.c

@@ -49,7 +49,7 @@ void cpu_init()
 	cpu0->privilege_mode = MACHINE;
 }
 
-static void cpu_decode(raw_instruction_t raw_instruction, instruction_t* output)
+static void cpu_decode(rv32_cpu_t* cpu, raw_instruction_t raw_instruction, instruction_t* output)
 {
 	output->opcode = raw_instruction.opcode;
 	output->immediate = 0;
@@ -112,8 +112,8 @@ static void cpu_decode(raw_instruction_t raw_instruction, instruction_t* output)
 			// TODO : Decode NOP instructions
 			break;
 		default:
-			fprintf(stderr, "Error: Unknown instruction opcode 0x%x, could not decode\n", raw_instruction.opcode);
+			// Throw an 'Invalid OPCODE' exception
-			exit(EXIT_FAILURE);
+			exception_trigger(cpu, SCAUSE_ILLEGAL_INSTRUCTION, 0);
 			break;
 	}
 }
@@ -433,6 +433,13 @@ static void cpu_execute(rv32_cpu_t* cpu, instruction_t* instruction)
 							cpu->regs.x[instruction->rd] = cpu->regs.x[instruction->rs1] ^ cpu->regs.x[instruction->rs2];
 							break;
 						case FUNC7_DIV:
+							if(!cpu->regs.x[instruction->rs2])
+							{
+								// ISA dictates that we return FFFFFFFF and set a flag bit to signal the exception
+								cpu->regs.x[instruction->rd] = 0xFFFFFFFF;
+								// TODO flag ?
+								break;
+							}
 							cpu->regs.x[instruction->rd] = ((int32_t) cpu->regs.x[instruction->rs1]) / ((int32_t) cpu->regs.x[instruction->rs2]);
 							break;
 						default:
@@ -518,15 +525,30 @@ static void cpu_execute(rv32_cpu_t* cpu, instruction_t* instruction)
 							break;
 						case IMM_EBREAK:
 							// EBREAK : generate a breakpoint exception
-							exception_trigger(cpu, SCAUSE_BREAKPOINT);
+							exception_trigger(cpu, SCAUSE_BREAKPOINT, 0);
 							break;
 						case IMM_SRET:
-							fprintf(stderr, "SRET: We don't support that.\n");
+							// SRET: Return from supervisor interrupt
+							// Restore Interrupt Enable from Previous Interrupt Enable
+							uint32_t sstatus = csr_read(cpu, CSR_SSTATUS);
+							if(sstatus & 0x80)
+								csr_write(cpu, CSR_SSTATUS, sstatus | 0b10);
+
+							// Restore privilege mode from Previous Privilege
+							// TODO
+
+							// Set Previous Interrupt Enable to 1
+							csr_write(cpu, CSR_SSTATUS, csr_read(cpu, CSR_SSTATUS) | 0x80);
+
+							// Set Previous Privilege to 0
+							// TODO
+
+							// Saved PC before interrupt is in CSR SEPC, jump back
+							cpu->pc = csr_read(cpu, CSR_SEPC) - 4;
 							break;
 						case IMM_MRET:
 							// Ret to destination address : CSR_MEPC content
-							// Change privilege mode to SUPERVISOR
+							// TODO fix it to act like sret
-							// TODO : Pop lower-privilege interrupt enable and privilege mode stack
 							cpu->privilege_mode = SUPERVISOR;
 							cpu->pc = cpu->csr[CSR_MEPC] - 4;
 							break;
@@ -537,7 +559,9 @@ static void cpu_execute(rv32_cpu_t* cpu, instruction_t* instruction)
 									// TODO : Check if we really need to do something on SFENCE.VMA ?
 									break;
 								case FUNC7_WFI:
-									fprintf(stderr, "WFI: Guest kernel must think we have interrupts. We have none. Halting simulation.\n");
+									// Wait For Interrupt : halt the simulation
+									// It will be woken up by an interruption
+									fprintf(stderr, "WFI: Halting simulation.\n");
 									cpu->sim_ticks_left = 1;
 									break;
 								default:
@@ -712,7 +736,7 @@ __attribute__((noreturn)) void cpu_loop(rv32_cpu_t* cpu)
 
 		// Decode
 		instruction_t instruction;
-		cpu_decode(raw_instruction, &instruction);
+		cpu_decode(cpu, raw_instruction, &instruction);
 
 		if(trace)
 		{

src/main.c

@@ -2,6 +2,7 @@
 #include "memory/memory.h"
 #include "bootloader/bootloader.h"
 #include "cpu/rv32cpu.h"
+#include "cpu/interrupt.h"
 #include "gdbstub/gdbstub.h"
 #include "devices/uart/uart.h"
 
@@ -31,34 +32,20 @@ int main(int argc, char** argv)
 		gdbstub_wait_for_connection();
 	}
 
+	// Initialize timer for timer interrupt
+	interrupt_timer_setup();
+
 	// CPU simulation : create cpu0 thread
 	if(!gdbstub) cpu0->sim_ticks_left = -1; // Simulate forever
 	pthread_t cpu0_thread;
 	pthread_create(&cpu0_thread, 0, (void*) cpu_loop, cpu0);
 
-	// Wait for the simulation to end
+	// Wait forever, until simulation end (which should be an ecall shutdown)
+	pthread_join(cpu0_thread, 0);
 	if(gdbstub)
 	{
-		pthread_join(cpu0_thread, 0);
 		gdbstub_stop();
 	}
-	else
-	{
-		while(1)
-		{
-			pthread_mutex_lock(&cpu0_mutex);
-			pthread_cond_wait(&cpu0->sim_condition, &cpu0_mutex);
-			if(!cpu0->sim_ticks_left && cpu0->sim_ticks_done > 0)
-			{
-				// Simulation ended
-                break;
-			}
-			pthread_mutex_unlock(&cpu0_mutex);
-		}
-
-        fprintf(stderr, "Simulation ended (in a non-debug environment)\n");
-        return cpu0->regs.a0;
-	}
 
 	return 0;
 }

src/memory/mmu.c

@@ -81,7 +81,7 @@ uint32_t mmu_resolve(rv32_cpu_t* cpu, memory_access_type_t access_type, uint32_t
 	if(!(pte & PTE_V))
 	{
 		// Invalid PTE
-		exception_trigger(cpu, mmu_scause_from_access(access_type));
+		exception_trigger(cpu, mmu_scause_from_access(access_type), vaddr);
 	}
 
 	if((pte & PTE_R) || (pte & PTE_W) || (pte & PTE_X))
@@ -109,7 +109,7 @@ uint32_t mmu_resolve(rv32_cpu_t* cpu, memory_access_type_t access_type, uint32_t
 	if(!(pte & PTE_V))
 	{
 		// Invalid PTE
-		exception_trigger(cpu, mmu_scause_from_access(access_type));
+		exception_trigger(cpu, mmu_scause_from_access(access_type), vaddr);
 	}
 
 	// This must be a leaf PTE, as Sv32 only supports 2-level mappings