Implement ping6 command to ping hosts using IPv6. It works the same way as
an ordinary ping command. There is no ICMP request so it is not possible
to ping our host. This patch adds options in Kconfig and Makefile to
build ping6 command.
Series-changes: 3
- Added structures and functions descriptions
- Added to ping6_receive() return value instead of void
Series-changes: 4
- Fixed structures and functions description style
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The command tftpboot uses IPv4 by default. Add the possibility to use IPv6
instead. If an address in the command is an IPv6 address it will use IPv6
to boot or if there is a suffix -ipv6 in the end of the command it also
force using IPv6. All other tftpboot features and parameters are left
the same.
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add net_ip6_handler (an IPv6 packet handler) into net_loop. Add
neighbor discovery mechanism into network init process. That is the
main step to run IPv6 in u-boot. Now u-boot is capable to use NDP and
handle IPv6 packets.
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Functions that were exposed in "net: ipv6: Add IPv6 basic primitives"
had only empty implementations and were exposed as API for futher
patches. This patch add implementation of these functions. Main
functions are: net_ip6_handler() - IPv6 packet handler for incoming
packets; net_send_udp_packet6() - make up and send an UDP packet;
csum_ipv6_magic() - compute checksum of IPv6 "psuedo-header" per RFC2460
section 8.1; ip6_addr_in_subnet() - check if an address is in our
subnet. Other functions are auxiliary.
Series-changes: 3
- Added comments
- Fixed style problems
- Fixed return codes instead of -1
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add the possibility to recognize IPv6 address in print function.
To output IPv6 address use %pI6 specifier.
Series-changes: 3
- Substituted #if (...) for if (...) to get better readability
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This functions is used as a converter from IPv6 address string notation
to struct ip6_addr that is used everywhere in IPv6 implementation. For
example it is used to parse and convert IPv6 address from tftpboot
command. Conversion algorithm uses two passes, first to verify syntax and
locate colons and second pass to read the address. In case of valid IPv6
address it returns 0.
Examples of valid strings:
2001:db8::0:1234:1
2001:0db8:0000:0000:0000:0000:1234:0001
::1
::ffff:192.168.1.1
Examples of invalid strings
2001:db8::0::0 (:: can only appear once)
2001:db8:192.168.1.1::1 (v4 part can only appear at the end)
192.168.1.1 (we don't implicity map v4)
Series-changes: 3
- Added function description
- Added length parameter to string_to_ip6()
Series-changes: 4
- Fixed function description style
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Implement basic of NDP. It doesn't include such things as Router
Solicitation, Router Advertisement and Redirect. It just has Neighbor
Solicitation and Neighbor Advertisement. Only these two features are used
in u-boot IPv6. Implementation of some NDP functions uses API that was
exposed in "net: ipv6: Add IPv6 basic primitives".
Also this patch inlcudes update in Makefile to build NDP.
Series-changes: 3
- Added structures and functions descriptions
- Fixed style problems
Series-changes: 4
- Fixed structures and functions description style
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Set up callbacks for main IPv6 variables ip6add, serverip6, gatewayip6
and set options to them in flag file. These variables are often set up by
users.
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add options to Makefile and Kconfig file to build IPv6
Series-changes: 3
- Added help for IPv6 support
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This patch is a collection of basic primitives that are prerequisite for
further IPv6 implementation.
There are structures definition such as IPv6 header, UDP header
(for TFTP), ICMPv6 header. There are auxiliary defines such as protocol
codes, padding, struct size and etc. Also here are functions prototypes
and its empty implementation that will be used as API for further patches.
Here are variables declaration such as IPv6 address of our host,
gateway, ipv6 server.
Series-changes: 3
- Added functions and structures descriptions
- Removed enums ND_OPT_*. It will be moved into further patches
- Substituted -1 for error codes
Series-changes: 4
- Changed functions and structures description style
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Xilinx changes for v2023.01-rc3-v2
xilinx:
- Fix MAC address selection for System Controller from FRU
- Cleanup Kconfig (ZYNQ_MAC_IN_EEPROM symbol)
versal:
- Create u-boot.elf for mini spi configurations
versal-net:
- Enable MT35XU flash
zynq:
- Add missing timer to DT for mini configurations
zynqmp:
- Do not include psu_init to U-Boot by default
- Do not enable IPI by default to mini U-Boot
- Update Luca's fragment
- Fix SPL_FS_LOAD_PAYLOAD_NAME usage
spi:
- gqspi: Fix tapdelay values
- gqspi: Fix 64bit address support
- cadence: Remove condition for calling enable linear mode
- nor-core: Invert logic to reflect sst26 flash unlocked
net:
- Add PCS/PMA phy support
The commit ed35de6170 ("Convert CONFIG_ZYNQMP_PSU_INIT_ENABLED to
Kconfig") converted CONFIG_ZYNQMP_PSU_INIT_ENABLED symbol and enabled it by
default which is not correct configuration.
Intention of this config was to have it enabled by default for SPL and
provide an option to users to also do low level initialization directly
from U-Boot.
That's why it is necessary to define second symbol with SPL marking in it
and properly use symbols depends on usage in Makefile.
Also disable ZYNQMP_PSU_INIT_ENABLED from boards which enables it by
default. CONFIG_SPL_ZYNQMP_PSU_INIT_ENABLED is enabled by default when SPL
is enabled.
Reported-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/d5fcbd66b05bf0d7ef594e66464ee23b48c5e4cc.1669969083.git.michal.simek@amd.com
When Linux boot takes over control of the pmu
(by signaling PM_INIT_FINALIZE via ipi), pmu will switch off 'unused'
rpu cores. The Xilinx zynqmp fsbl prevents switching off those cores by
marking rpu cores as 'used' when loading code partitions to those cores.
The current u-boot SPL is missing this behaviour, which results in
halting rpu cores during Linux boot.
This commit mimics the xilinx zynqmp fsbl behavior by marking r5 cores as
used when they are released during boot.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Signed-off-by: Lukas Funke <lukas.funke-oss@weidmueller.com>
Link: https://lore.kernel.org/r/20221028121547.26464-2-lukas.funke-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
If we bridge an external PHY to Xilinx's PCS/PMA PHY and would like to
get and set the real status of the PHY facing the external world. Then
we should phy_connect() to the external PHY instead of the PCS/PMA one.
Thus, we add a pcs-handle DT entry, which have been merged in Linux, and
leave the configuration of it to the driver itself.
Unlike Linux, where the PCS/PMA PHY is managed by phylink, managing the
PCS/PMA PHY is only internal to the driver in U-Boot. The PCS/PMA PHY
pressents only when the phy-mode is configured as SGMII or 1000Base-X,
so it is always 1 Gbps and full-duplex and we may skip passing link
information out.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Link: https://lore.kernel.org/r/20221101035800.912644-2-andy.chiu@sifive.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Pull request for efi-2023-01-rc3
Documentation:
* describe DM firmware needed for j721e_evm
* describe management of UEFI security data base with eficonfig
UEFI:
* code clean-up for eficonfig command
* fix handling of DHCP aknowledge
* correct EFI memory type used for U-Boot code
* unit test for FatToStr() truncation
* add an EFI binary to print boot hart ID
Other:
* improve parameter checks in console functions
* fix variable initialization in blk_get_device_part_str
This commits adds the description for the UEFI Secure Boot
Configuration through the eficonfig menu.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Redacted the complete document.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
eficonfig command reads all possible UEFI load options
from 0x0000 to 0xFFFF to construct the menu. This takes too much
time in some environment.
This commit uses efi_get_next_variable_name_int() to read all
existing UEFI load options to significantlly reduce the count of
efi_get_var() call.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Some commands need to enumerate the existing UEFI load
option variable("Boot####"). This commit transfers some code
from cmd/efidebug.c to lib/efi_loder/, then exposes
efi_varname_is_load_option() function to check whether
the UEFI variable name is "Boot####".
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The directory name in eficonfig menu entry contains the
'\' separator. strcmp() argument ".." is wrong and one directory
up handling does not work correctly. strcmp() argument must
include '\' separator.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
EFI_LOADER_DATA/CODE is reserved for EFI applications.
Memory allocated by U-Boot for internal usage should be
EFI_BOOT_SERVICES_DATA or _CODE or EFI_RUNTIME_SERVICES_DATA or _CODE.
Reported-by: François-Frédéric Ozog <ff@ozog.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: François-Frédéric Ozog <ff@ozog.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The dhcp command may be executed after the first UEFI command.
We should still update the EFI_PXE_BASE_CODE_PROTOCOL.
Don't leak content of prior acknowledge packages.
Handle failing allocation when calling malloc().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Provide an EFI binary that prints the boot hart ID as found in the
device-tree as /chosen/boot-hartid property and as provided by the
RISCV_EFI_BOOT_PROTOCOL.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
* BASH code should be labeled as such.
* Code blocks should be indented by 4 spaces.
Fix these here.
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The symbol CONFIG_NET_DEVICES does not exist.
The correct name is CONFIG_NETDEVICES.
Fixes: 77b5c4a5b1 ("efi_loader: Let networking support depend on NETDEVICES")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
blk_get_device_part_str() should always initialize all info fields
including sys_ind. As a side effect the code is simplified.
Replace '(0 ==' by '(!' to conform with Linux coding style.
Fixes: 4d907025d6 ("sandbox: restore ability to access host fs through standard commands")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
We use the parameter file in console functions to choose from an array
after checking against MAX_FILES but we never check if the value of file
is negative.
Running ./u-boot -T -l and issuing the poweroff command has resulted in
crashes because os_exit() results in std::ostream::flush() calling U-Boot's
fflush with file being a pointer which when converted to int may be
represented by a negative number.
This shows that checking against MAX_FILES is not enough. We have to ensure
that the file argument is always positive.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
- Add Peter Robinson as a co-custodian for Pi, update the maintainer
record for common/usb_storage.c, re-add bmp_logo to tools-only and fix
SPI booting on the SanCloud BBE
The SanCloud BBE requires the same dtb nodes to be present in the SPL as
the AM335x EVM.
The SanCloud BBE Lite also requires the SPI flash node and all
dependencies to be present in the SPL to support SPI boot.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
