Add the HBMC and MUX_MMIO configs in the R5 SPL stage for
successful HBMC boot.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
MUX_MMIO is needed by HBMC in SPL stage. Enable it at SPL as well
as u-boot proper stage.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
The commit 210702ae6c ("spl: spi: fix falcon mode for spi boot") fixed
the logic of spl_start_uboot() where 0 means OS boot and 1 means u-boot.
Zynq/ZynqMP enable OS_BOOT by default but it was never really be used
that's why disable it to boot via U-Boot phase all the time.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Commit 649f4a7d3c ("board: ti: am57xx: Set fdtfile from C code
instead of findfdt script") prepends "ti/omap/" to the actual name
of the fdtfile whereas fit image boot needs exact dtb name. So, remove
"ti/omap" from name_fit_config by substituting it with an empty string.
Fixes: 649f4a7d3c ("board: ti: am57xx: Set fdtfile from C code instead of findfdt script")
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
This patch is used to restore support for i.MX95 A0 silicon. To avoid
duplicating defconfig, imx95.config is added and can be shared between
imx95_a0_19x19_evk_defconfig and imx95_19x19_evk_defconfig.
container.cfg and imximage.cfg are used to created .cfgout files that
are be passed to mkimage with -n to build flash.bin. Now they have been
deleted and replaced by adding their content to properties of node which
type is nxp-imx9image under binman node.
Fixes: 9936724aa9 ("imx95_evk: Add i.MX95 B0 support")
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Tested-By: Tim Harvey <tharvey@gateworks.com> # imx95-19x19-evk (rA0)
To support passing specific commands defined in enum imx8image_cmd to
the imx8image_copy_image() function, this patch introduces a new entry
type nxp-imx9image. This entry generates a plain text data file
containing the relevant commands, enabling flexible configuration during
image creation.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Check the compatible string of ethernet1 node for KS8851 very early on,
before calling uclass_get_device_by_of_path() which might initialize
the device and possibly attempt to configure MAC address into device
which is not KS8851. Doing the compatibility check early prevent this.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The layout of SYSCFG_ETHnCR on STM32MP25xx is slightly different yet again.
Add missing swizzling to program the correct register with the correct content.
Fixes: 20afca89ed ("net: dwc_eth_qos: add support of stm32mp2 platform")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Christophe ROULLIER<christophe.roullier@foss.st.com>
The clk_register_composite() does clk_resolve_parent_clk() look up,
which requires valid udevice pointer. Do not pass NULL, pass a valid
device pointer to prevent hang on registering ck_usbo_48m clock on
STM32MP13xx.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
SPL recover data section is broken which causes reboot failure on
some i.MX platforms (iMX8QM/iMX95).
The global variable cold_reboot_flag is assigned to weak reset_flag
function which always return 1, so restore never been executed in
warm reboot.
Fixes: 1c37e59bfb ("arm: armv8: Improve SPL data save and restore implementation")
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
spl_start_uboot is a board overridable function that switches to falcon
boot mode on return value of 0.
Though for SPI, the falcon boot mode was being enabled on return value
of 1 which is not the correct behaviour. Therefore this patch fixes it
to the expected boot flow.
Fixes: 14509a28aa ("spl: spi: Consolidate spi_load_image_os into spl_spi_load_image")
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Anshul Dalal <anshuld@ti.com> says:
On various TI's K3 platforms boot failure was observed on SPI NOR since the
commit 5609f200d0 ("arm: Kconfig: enable LTO for ARCH_K3"). This issue was
root caused to stack corruption by the 'udma_transfer' function. Where the local
variable 'paddr' of type 'dma_addr_t' was being written to as a 64-bit value
which overwrote the stack frame of the caller (dma_memcpy) as only 32-bits had
been reserved for paddr on the stack, specifically the r4 register in the frame
of dma_memcpy was being overwritten with a 0.
drivers/dma/ti/k3-udma.c:2192:
int udma_transfer(...)
{
...
dma_addr_t paddr = 0;
...
/* paddr was written to as 64-bit value here */
udma_poll_completion(uc, &paddr);
}
drivers/dma/dma-uclass.c:234:
int dma_memcpy(...)
{
dma_addr_t destination;
dma_addr_t source;
int ret;
...
/* This call resolves to udma_transfer */
ret = ops->transfer(...);
...
dma_unmap_single(destination, ...);
dma_unmap_single(...);
return ret;
}
Enabling LTO changed how gcc mapped local variables of dma_memcpy to CPU
registers, where earlier the bug was hidden since the overwritten register
'r4' was allotted to 'ret' but was allotted to 'destination' once LTO was
enabled. And since the overwritten value was 0, the bug remained undetected
as it just meant ret was 0, but having 'destination' set to 0 caused
dma_unmap_single to fail silently leading to boot failures.
The fix entails enabling DMA_ADDR_T_64BIT which changes dma_addr_t from u32 to
u64 for the R5 SPL thus reserving enough space for 'paddr' to prevent the
overflow.
Link: https://lore.kernel.org/r/20250903115207.572304-1-anshuld@ti.com
ARCH_K3 encompasses both 32 and 64-bit cores on the same SoC, though the
DMA addresses are always 64-bit in size.
With the current implementation, the R5 SPL uses a u32 for dma_addr_t
which leads to data overflow when functions such as k3_nav_*_pop_mem try
to write a 64-bit address to dma_addr_t variable.
In certain cases it leads to stack corruption which manifest as boot
failures on certain compilers, such as SPI boot on GCC 14.2 or 13.3.
Therefore this patch selects CONFIG_DMA_ADDR_T_64BIT for all ARCH_K3.
Fixes: ffcc66e8fe ("dma: ti: add driver to K3 UDMA")
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Prasanth Babu Mantena <p-mantena@ti.com>
dma_addr_t is used to store any valid DMA address which might not
necessarily be the same size as host architecture's word size. Though
various typecasts in k3's dma and usb driver expect dma_addr_t to be the
same size as the word size.
This leads the compiler to throw a "cast from pointer to integer of
different size" warning when the condition is not met, for example when
enabling CONFIG_DMA_ADDR_T_64BIT for the R5 core.
Therefore this patch fixes the typecasts by using 'uintptr_t' as an
intermediary type which is guaranteed to be the same size as void* on
the host architecture. Thus, eliminating the compiler warning.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Since commit 5fb88fa725 "env: Rename SYS_REDUNDAND_ENVIRONMENT to ENV_REDUNDANT"
the option SYS_REDUNDAND_ENVIRONMENT is no longer available and should be
renamed to ENV_REDUNDANT.
Fixes: 95f03ee65c ("env: mmc: fix offsets relative to the end of the partition")
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Enable CONFIG_DNS for visionfive2 board target. With CONFIG_PROT_DNS_LWIP
enabled and CONFIG_CMD_DNS disabled this restores DNS functionality
displaced by LwIP DNS refactoring during the merge window.
Signed-off-by: E Shattow <e@freeshell.de>
Booting u-boot as payload with coreboot's main branch is currently broken
since commit [1] on x86 as U-boot assumes the active GDT matches what
U-Boot would have installed in start16.S.
Make no assumptions and always load the GDT when building as coreboot
payload to make sure the segment registers are actually matching the GDT.
Fixes #GP seen when booting U-Boot as coreboot payload.
1: https://review.coreboot.org/c/coreboot/+/87255
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://review.coreboot.org/c/coreboot/+/87255
Reviewed-by: Tom Rini <trini@konsulko.com>
Add a MAINTAINERS entry for the DesignWare XGMAC network driver to
ensure future patches are properly routed for review and support.
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
We now can provide a map and have the standard fdtfile variable set from
code itself. This allows for bootstd to "just work".
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
We now can provide a map and have the standard fdtfile variable set from
code itself. This allows for bootstd to "just work".
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Add omap common environment variables to .env. We retain the old-style C
environment .h files to maintain compatibility with other omap devices that
have not moved to using .env yet.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Avoid use of hard-coded address in boot command, instead use $loadaddr
which is the default load address. This improves consistency of the
environment on this board.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The CONFIG_ENV_VARS_UBOOT_CONFIG extends U-Boot environment with
variables arch/board/board_name/soc/vendor, which can be used to
discern different devices from each other based purely on U-Boot
environment variables.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
In spi_rx_tx there comes a test for execution of a code block that
allows execution if rxp is not NULL or stopping is true. However all the
code in this block relies on rxp being valid so allowing entry just if
stopping is true does not make sense. So remove this from the test
expression leaving just a NULL check for rxp.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
In rzg2l_pinconf_set and rzg2l_get_pin_muxing if the call to
rzg2l_selector_decode fails then the variable pin may not have been
assigned to. Remove the use of pin from the error message. Also update
the error message to show the invalid selector used instead of port
which will be the error code returned.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Paul Barker <paul@pbarker.dev>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Pull request efi-2025-10-rc4.
CI:
* https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/27527
Documentation:
* Rephrasing and text corrections for buildman
UEFI:
* Serial: Use correct EFI status type
* Let EFI_HTTP_BOOT select CMD_DHCP
* Let EFI_VARIABLES_PRESEED depend on !COMPILE_TEST
To make stdout messages easier to read and understand.
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
For multi-line commands the lines should preferably be aligned with
the opening parenthesis.
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
There exists both a Origen board based on exynos4210, and a board
based on exynos4412. U-boot only supports the one based on exynos
4210, but Kconfig string was accidentally written as Exynos4412 Origen
in previous migration to Kconfig. Fix the string to clear up
confusion, and to not give the impression that both types of Origen
boards are supported.
Fixes: 72df68cc6b ("exynos: kconfig: move board select menu and common settings")
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
SL101 unlike TF101/G has no Lid sensor, so lets add a separate env for
SL101 without Lid sensor used.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Hall sensor found in SL101 is not used for closed dock detection as on
TF101 or TF101G, it is used to detect if keyboard slider is out. To address
this, lets move Lid sensor switch into TF101/G trees and add Tablet mode
switch into SL101 tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
LAN9514 is a chip on E850-96 board which acts as a USB host hub and
Ethernet controller. It's controlled via USB lines when DWC3 is
configured to be in USB host role (by setting the "dr_mode" property to
"host" value in e850-96 dts file).
Enable network support and LAN9514 chip support. This makes Ethernet
functional on E850-96 board.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Exynos850 SoC has a dual-role USB controller which can be configured in
USB host role. As it's the only one USB controller on the board, it's
shared between "device" USB connector (micro-USB) and host USB
connectors. The hardware automatically powers on the host related parts
when the micro-USB cable (for device role) is being disconnected. Also,
as U-Boot lacks dynamic USB role switching capability, the only way to
switch the role at the moment is to modify "dr_mode" property in
U-Boot's device tree file here:
dts/upstream/src/arm64/exynos/exynos850-e850-96.dts
This won't affect the dynamic role switching later in Linux kernel, as a
separate (different) device tree blob is provided to the kernel.
Enable the USB host support and corresponding commands to make it
functional in E850-96 board.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Tom Rini
Anurag DuttaandTom Rini
Michal SimekandTom Rini
Alice GuoandFabio Estevam
E ShattowandTom Rini
Marek VasutandPatrice Chotard
Ye LiandTom Rini
Anshul DalalandTom Rini
Heiko ThieryandTom Rini
Heinrich SchuchardtandTom Rini
Patrick RudolphandTom Rini
Boon Khai NgandTom Rini
Marek Vasut
Andrew GoodbodyandMinkyu Kang
Henrik GrimlerandMinkyu Kang
Svyatoslav Ryhel
Sam ProtsenkoandMinkyu Kang