GPIO reset and power-off functionality depends on device tree data, which
is often absent in SPL or TPL. To address this, incorporate PHASE_ into the
config option and add Kconfig option or each phase.
Adjust SYSRESET_GPIO and POWEROFF_GPIO uses to address possible
regressions.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Historically, PLLD2 mirrored PLLD's layout on Tegra30 and 114. However,
with the introduction of Tegra124, this changed. This layout alteration was
not considered, and it now requires a corrective action to prevent future
complications.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
PLLD and PLLD2 clocks possess a unique enable bit within their
miscellaneous register. Take this into account when using clock_set_rate
function.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add missing configuration of chip select polarity. Default polarity is LOW,
which satisfies most cases but some devices require HIGH polarity and will
not work.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tom Rini <trini@konsulko.com> says:
This series switches to always using $(PHASE_) in Makefiles when
building rather than $(PHASE_) or $(XPL_). It also starts on documenting
this part of the build, but as a follow-up we need to rename
doc/develop/spl.rst and expand on explaining things a bit.
Link: https://lore.kernel.org/r/20250401225851.1125678-1-trini@konsulko.com
Expand the conditional compilation section to explain when to use
CONFIG_IS_ENABLED rather than IS_ENABLED and provide an example. Next,
note what the PHASE_ macro is supposed to be used for as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
In order to make a start on explaining how and when to use certain
macros, we need to document their usage somewhere. As a first step, take
section 21 of the v6.13 Linux Kernel coding-style document on
conditional compilation, verbatim, and add it to our documentation.
Further rewording to be clearer about U-Boot will be done next.
Signed-off-by: Tom Rini <trini@konsulko.com>
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <trini@konsulko.com>
When the `optee hello' subcommand is called, the do_optee_hello_world_ta()
function passes a NULL pointer to the strcmp() function while verifying its
input argument, which results in the following crash:
=> optee hello
"Synchronous Abort" handler, esr 0x96000010, far 0x0
Fix this by verifying the number of input arguments instead.
Fixes: e3cf80fbe0 ("cmd: Add support for optee commands")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jerome Forissier <jerome.forissier@linaro.org>
Cc: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
The number of memory banks in QEMU is not bounded by 1.
In this example we have two banks:
qemu-system-aarch64 \
-machine virt \
-nographic \
-cpu cortex-a72 \
-m 8G \
-smp 8,sockets=2,cores=4,threads=1 \
-object memory-backend-ram,id=mem0,size=4G \
-numa node,cpus=0-3,memdev=mem0 \
-object memory-backend-ram,id=mem1,size=4G \
-numa node,cpus=4-7,memdev=mem1 \
-bios u-boot.bin
Use the default value defined in /Kconfig as 4.
Suggested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Suggested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The AM62x uses the DA8XX (DaVinci) GPIO controller. Enable
CONFIG_DA8XX_GPIO to support GPIO access from the Cortex-A53.
Also enable the 'gpio' command to allow users to interact
with GPIOs from the U-Boot shell.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
This enables the 'rproc' command, allowing users to
start, stop, and manage co-processors as well as load firmware
images.
Useful for systems with auxiliary cores, such as the M4 core
in the AM62x soc.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
This enables the 'rproc' command, allowing users to
start, stop, and manage co-processors as well as load firmware
images.
Useful for systems with auxiliary cores, such as M4 or R5 cores
in the AM64x soc.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The CI image does not ship with all tools required for the binman tests.
Have binman build the missing tools.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Qualcomm changes for v2025.07:
CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/25653
There's been a surprising amount of activity lately on the Qualcomm
side with the two oldest boards getting some fresh attention and a lot
of cleanup and polish going on across the board.
* SDM660 gets USB phy fixes and a pinctrl driver
* The recently added SA8775P/QCS9100 SoC gets a pinctrl driver
* The Qualcomm pinctrl driver now handles reserved pins correctly,
fixing crashes on some boards when running "gpio status -a"
* OF_UPSTREAM_BUILD_VENDOR is enabled in qcom_defconfig
* SDM845 and SC7280 get missing clocks added (since we're now stricter
about those). This gets USB working more reliably in more cases.
* DM_USB_GADGET is enabled for all boards using DWC3 and fasbtoot is
enabled too
* A bug in the livetree fixup code is fixed (making USB work on a lot
more platforms)
* Button label lookup is made case insensitive* bootretry becomes more dynamic, allowing it to be hijacked to make a
"persistent" boot menu that allows dropping to U-Boot shell later on
* A new qcom-phone.config fragment is added along with a phone-specific
default environment and phone-specific debugging/bringup docs. These
make U-Boot more usable on devices without a serial port or keyboard.
* The db820c gets fixed up and updated documentation
* The db410c also gets some love and modernisation as well as a new
reviewer.
* A new driver is added for the USB VBUS regulator found on various
Qualcomm PMICs
* The Qualcomm SPMI driver gets some fixes and cleanup for SPMI v5 and
v7 support.
Pull request efi-2025-07-rc1
CI:
* https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/25648
Documentation:
* Update authenticated capsules documentation
UEFI:
* Add support for loading FIT images including initrd
- efi_loader: efi_load_initrd: provide a memory mapped initrd
- efi_loader: binary_run: register an initrd
- bootm: add support for initrd in do_bootm_efi
* efi_selftest: remove un-needed NULL checks
* efi: Fix efiboot for payloads loaded from memory
* Print extra information from the bootmgr
* Move public cert for capsules to .rodata
* Set EFI capsule dfu_alt_info env explicitly
* Make FDT extra space configurable
* Install the ACPI table from the bloblist
* Handle GD_FLG_SKIP_RELOC
* Handle malloc() errors
Others:
* acpi: select CONFIG_BLOBLIST
* smbios: select CONFIG_BLOBLIST
* xilinx: dfu: Fill directly update_info.dfu_string
* cmd: fwu: Dump custom fields from mdata structure
* board: remove capsule update support in set_dfu_alt_info()
local-bd-address in the device tree needs to be formatted with the least
significant byte first (i.e. little endian). We're not doing this when
adding it to the DT, which means the MAC address ends up being reversed in
Linux. Fix this by reversing the array before setting it in the DT.
We're also flipping the wrong bit when generating the BD address. Before
reversing the array, the least significant bit is in the last byte.
Fixes: ff06dc2403 ("db410: alter WLAN/BT MAC address fixup")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by:
Link: https://lore.kernel.org/r/20250407-db410c-fixes-v1-3-524aefbc8bb4@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The workaround for the "PSCI bug" on DragonBoard 410c implemented in
arch/arm/mach-snapdragon/include/mach/boot0.h clobbers the x0 register
by storing the CurrentEL in there. When running in EL1, the mode switch
sequence implemented there later clears the register again, but this is
skipped when U-Boot is booted in EL2.
This causes crashes in the mach-snapdragon board_fdt_blob_setup() later,
because the invalid address stored in x0 gets dereferenced to check if it
points to a valid DTB.
We can't rely on having a valid values in the CPU registers for the first
stage bootloader configuration on DB410c, and nothing would place a DTB
there anyway. Skip selecting the SAVE_PREV_BL_FDT_ADDR option for the boot0
hook case to avoid crashing with the clobbered register value.
Fixes: 059d526af3 ("mach-snapdragon: generalise board support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by:
Link: https://lore.kernel.org/r/20250407-db410c-fixes-v1-1-524aefbc8bb4@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
To enable more complex sequencing of the bootmenu, autoboot, and
bootretry, handle changes to the bootretry variable between tries. This
makes it possible to turn bootretry off (e.g. to drop to a shell) and
then back on again.
This makes it possible to have a persistent bootmenu (the only way to
navigate U-Boot on devices like smartphones which lack a physical
keyboard) by having bootcmd be defined to launch the bootmenu. This
allows for menu options like enabling USB mass storage gadget to return
back to the boot menu once the gadget is shut down.
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Danila Tikhonov <danila@jiaxyga.com> # google-sunfish
Tested-by: Jens Reidel <adrian@mainlining.org> # xiaomi-davinci
Link: https://lore.kernel.org/r/20250331-qcom-phones-v4-3-f52e57d3b8c6@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add a common RAUC boot logic environment and make use of it in the
i.MX93 environment. The RAUC boot logic is deactivated by default and
can be activated by setting "doraucboot" to "1".
Signed-off-by: Martin Schwan <m.schwan@phytec.de>
Reviewed-by: Leonard Anderweit <l.anderweit@phytec.de>
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Move the default bootcmd from the defconfig to the board environment in
preparation for RAUC support. No change in functionality.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Add support for disabling external environment import (bootenv.txt) by
setting the ${no_bootenv} environment variable.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Add prepare_mcore script to environment to be able to notify Linux about
the state of M33 core via the kernel cmdline by appending to ${optargs}.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Move the load addresses for FDTs and bootenv.txt to create space for
loading OS image. Otherwise, parts of the image might get corrupted.
and the following boot error will be present:
ERROR: FDT image overlaps OS image (OS=80400000..832a0000)
Moreover, this commit also syncs addresses with downstream PHYTEC
u-boot for i.MX93 in preparation for FIT image support in the future.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Svyatoslav Ryhel
Tom Rini
Vincent StehléandTom Rini
Heinrich SchuchardtandTom Rini
Daniel SchultzandTom Rini
Leonard AnderweitandTom Rini
Stephan GerholdandCaleb Connolly
Alexey MinnekhanovandCaleb Connolly
Neil ArmstrongandCaleb Connolly
Martin SchwanandFabio Estevam
Primoz FiserandFabio Estevam
Vitor SoaresandFabio Estevam