The type efi_status_t is not compatible with the return type int.
Let efi_store_memory_map() return -EFAULT instead of a truncated EFI error
code.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add extension_overlay_addr description to the list of environment
variables that can be useful during the standard boot.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Now that extension support has been added to extlinux and efi bootmeths
we can remove this line from the TODO list.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Currently, the EFI framebuffer is non-functional in payload mode. It
always reports: "No video mode configured in EFI!"
This is caused by a copy-paste error that replaced
"struct efi_entry_gopmode" with "struct efi_gop_mode".
Fixes: 88753816cf ("efi: video: Move payload code into a function")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Since C99 flexible array members are allowed at the end of structures.
We require C11.
Use struct efi_gop_mode_info in the definition of struct efi_entry_gopmode
to avoid code duplication and unnecessary conversions.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
On RISC-V QEMU provides an XSDT table. The RSDP table points to it.
We must not zero out this pointer because otherwise no ACPI table can be
found.
Fixes: 15ca25e31e ("x86: emulation: Support BLOBLIST_TABLES properly")
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Update the command to show the size and selected file, since this is
useful information at times. Add a heading so it is clear what each
field refers to.
Add a simple test as well.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Now that we've had jobs running on both amd64 and arm64 hosts for a
while, we have enough data to look at usage and findings. For the world
build job, make use of the new DEFAULT_FAST_TAG and only build it once,
on either amd64 or arm64 as we don't run in to host specific results
there. For sandbox, continue to build on both arm64 and amd64 hosts as
we can find host specific breakage that way. Remove the mistaken
restriction on sandbox64_lwip.
Signed-off-by: Tom Rini <trini@konsulko.com>
Dmitrii Sharshakov <d3dx12.xx@gmail.com> says:
I faced some minor compatibility issues when choosing Clang as the
cross-compiler for my target.
Please review these two fixes, aiming at enabling Clang-based builds
(still using GNU binutils) for 32-bit ARM targets.
Tested to fix build with (also run-tested on qemu arm and arm64 with clang):
make ARCH=arm HOSTCC=clang CROSS_COMPILE=arm-none-eabi- CC=clang imx6ulz_smm_m2b_defconfig
make ARCH=arm HOSTCC=clang CROSS_COMPILE=arm-none-eabi- CC=clang -j20
Link: https://lore.kernel.org/r/20251101-clang-fixes-v1-0-a8398475226e@gmail.com
Add support for jumping to Linux kernel through OPTEE-OS on ARMv7a to SPL.
This is already supported on ARMv8a, this patch adds the ARMv7a support.
Extend the SPL fitImage loader to record OPTEE-OS load address and in case
the load address is non-zero, use the same bootm-optee.S code used by the
U-Boot fitImage jump code to start OPTEE-OS first and jump to Linux next.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Add support for jumping to Linux kernel through OPTEE-OS on ARMv7a.
This is only supported if U-Boot runs in PL1 secure. This change adds
two components, one is fitImage OPTEE-OS loadable handler, which makes
a note of OPTEE-OS being loaded and stores the load address for later
jump to it. The second part is the actual jump to Linux through OPTEE-OS.
The jump through OPTEE-OS requires set up of multiple CPU registers, r1
and r2 are passed through, r0 and r3 have to be set to 0, lr is set to
Linux kernel entry point. This setup is done by new assembler function
boot_jump_linux_via_optee().
The boot_jump_linux_via_optee() also includes STM32MP13xx late TZC
configuration write, this cannot be moved easily, hence the ifdef.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Make sure to pass Clang flags to the KBUILD_CPPFLAGS as well, as this
variable is used for flags during compiling for target
Skipping this leads to Clang being invoked with args for target, but
without target indication, thus defaulting to host arch:
LDS u-boot.lds
clang: error: ... '-mabi=' for target 'x86_64-suse-linux'
clang: error: ... '-mno-thumb' for target 'x86_64-suse-linux'
clang: error: ... '-mno-unaligned-access' for target 'x86_64-suse-linux'
clang: error: ... '-ffixed-r9' for target 'x86_64-suse-linux'
clang: error: ... '-mno-movt' for target 'x86_64-suse-linux'
make: *** [Makefile:2345: u-boot.lds] Fehler 1
Signed-off-by: Dmitrii Sharshakov <d3dx12.xx@gmail.com>
This option is not available for 32-bit ARM targets and causes an error
when building with Clang:
clang: error: unsupported option '-mgeneral-regs-only' for
target 'arm-none-eabi'
This fixes the following patch (also seems to only concern AArch64):
Link: https://lists.denx.de/pipermail/u-boot/2021-August/458067.html
Signed-off-by: Dmitrii Sharshakov <d3dx12.xx@gmail.com>
When spl boot device list has multiple FAT devices, any previousely
registered FAT device should be deregistered before registering
next FAT boot device, otherwise the function may not attempt boot
from next FAT device.One of the situations where this issue can be
observed is when the boot device list has two FAT partitions of a
memory device and if booting fails on first partition (because of
file or partition related errors), boot from next partition actually
gets attempted on previous boot device only, as the previous device
has remained marked as registered. Call the function that invalidates
cached boot device in case of failure in booting from current FAT
boot device.
Signed-off-by: Prasad Kale <prasad.kale@live.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Align the implementation to rsa_add_verify_data() by writing the modulus
and r-squared properties with the same length as the key itself. This
fixes signature verification issues when one of the parameters has
leading zeros.
Reported-by: Hans Gfirtner (Nokia) <hans.gfirtner@nokia.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Technically, commit 24bf44cf88 ("spl: fit: Do not fail immediately if
an overlay is not available") introduced that regression as the code
will never advance if spl_fit_get_image_name() will return an error. But
at that time, spl_fit_get_image_node() was used in spl_fit_append_fdt()
which calls fdt_subnode_offset() to get the image node. And I presume
the commit was about the latter failing gracefully and trying the next
one.
But with commit b13eaf3bb4 ("spl: fit: Add board level function to
decide application of DTO") that behavior changed and the loop in
spl_fit_append_fdt() no longer uses spl_fit_get_image_node() but
spl_fit_get_image_name() directly. Thus it doesn't make any sense to not
break the loop if that fails.
Also, the original use case of commit 24bf44cf88 ("spl: fit: Do not
fail immediately if an overlay is not available") is preserved because
spl_subnode_offset() is now called within the loop and errors are
handled gracefully (and advancing the index).
Fixes: b13eaf3bb4 ("spl: fit: Add board level function to decide application of DTO")
Signed-off-by: Michael Walle <mwalle@kernel.org>
In Azure, older pipelines such as ours do not default to a shallow fetch
but rather do a complete clone. This introduces a marginal time increase
in each task, but also more importantly takes up significant disk space.
We are now getting warnings in some cases about using more than 95% of
our available disk space so take this as a first easy step to resolve
that problem.
Signed-off-by: Tom Rini <trini@konsulko.com>
Rockchip boards may depend on a working MMC regulator in SPL to
successfully load FIT payload from MMC. Typically, these boards only
include the vmmc-supply regulator and not its vin-supply in SPL control
FDT.
The commit f98d812e53 ("power: regulator: Add vin-supply for GPIO and
Fixed regulators") breaks loading FIT from MMC in SPL on some of these
boards due to now requiring the vin-supply to be included in the SPL
control FDT.
The commit also strangely enables any found vin-supply in
regulator_common_of_to_plat() and not when a regulator is enabled or as
part of regulator_autoset().
Revert the commit to fix FIT loading in SPL on broken boards.
If a board needs to have its vin-supply enabled, two options come to
mind:
- Add regulator-always-on prop to the regulator in the -u-boot.dtsi for
any board.
- Implement full support for reference counting of regulators and then
update the regulator-uclass to enable any found vin-supply when a
regulator is enabled.
This reverts commit f98d812e53.
Reported-by: Dang Huynh <danct12@riseup.net>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
If CONFIG_GPIO_HOG is not set, then gpio_hog_lookup_name() is empty,
and thus does not initialize any of its parameters. It does still
return 0 though, and so any calling function might assume that the
parameters have been initialized successfully.
Change the return value to -ENODEV in this case, as the function
would in the case when CONFIG_GPIO_HOG is set but the gpio hog
could not be found.
Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
In devices where the U-Boot is used as a secondary bootloader, we rely
on the device's primary bootloader to implement CNTFRQ_EL0. However,
this reliance may lead to a non-functional timer in broken firmware.
For instance, some versions of Samsung's S-Boot don't implement it. It's
also not possible to set it in the U-Boot, because it's booted in a lower
exception level. CNTFRQ_EL0 is reported to be 0.
Use gd->arch.timer_rate_hz to override the queried value if set. This
setting needs to be done in the board file, preferrably in timer_init().
This feature is present only when the CONFIG_ARMV8_CNTFRQ_BROKEN is
enabled.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Now that we have a test for QEMU using transfer list from the previous
stage, there are two platforms testing this particular infrastructure. A
problem with the vexpress_fvp platform emulation in Gitlab is that we
often run it on hosts that are fast enough that we run in to a race
condition when trying to acquire the console and the test fails. Remove
both vexpress_fvp tests from Gitlab (they can remain in Azure) to remove
these spurious failures.
Signed-off-by: Tom Rini <trini@konsulko.com>
This also incorporates the following commits to the Dockerfile:
da7942de29 Dockerfile: remove Python 2.7
183299d9a4 docker: add OP-TEE and TF-A build for testing Firmware Handoff
Signed-off-by: Tom Rini <trini@konsulko.com>
Add qemu_arm64_tfa_fw_handoff test entries to azure and gitlab
pipelines.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Check the existence of bl1 and fip from:
1. /opt/tf-a/${board_type}_${board_ident}, if not exist, then;
2. /opt/tf-a/${board_type}
This change allows to test with TF-A with specified board ID only.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Firmware Handoff tests will leverage the same board type 'qemu_arm64'
with a new board ID 'fw_handoff_tfa_optee', thus select CMD_BLOBLIST
in qemu_arm64_defconfig for running the test.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add test cases to validate FDT and TPM eventlog handoff from TF-A
and OP-TEE via bloblist.
For FDT, the nodes 'reserved-memory' and 'firmware' appended by
OP-TEE indicates a successful handoff.
For TPM eventlog, the events 'SECURE_RT_EL3', 'SECURE_RT_EL1_OPTEE'
and 'SECURE_RT_EL1_OPTEE_EXTRA1' created by TF-A indicates a
successful handoff.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Fetch OP-TEE (4.7.0), TF-A (v2.13.0), MbedTLS (v3.6) and build
bl1 and fip with both Firmware Handoff and Measured Boot enabled.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
mem_map_from_dram_banks calls fdtdec_setup_memory_banksize to setup the
dram banks though that is expected to be done by dram_init_banksize as
part of board_r sequence.
This has the side effect of modifying gd->bd->bi_dram as well, therefore
this patch removes the call and updates spl_enable_cache for K3 to call
dram_init_banksize.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Closes: https://lore.kernel.org/u-boot/20251027165225.GA71553@francesco-nb/
Fixes: fe2647f2a0 ("arm: armv8: mmu: add mem_map_from_dram_banks")
Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Add boot support and peripherals like eMMC/SD, UART, I2C, GPIO, ENETC0/1
and PCIE0/1 for iMX95 15x15 LPDDR4X EVK.
Updated doc for build instructions.
Signed-off-by: Ye Li <ye.li@nxp.com>
Add -u-boot.dtsi for iMX95 15x15 EVK used by SPL and binman.
iMX95 15x15 EVK uses LPDDR4X which needs dedicated DDR FW.
Signed-off-by: Ye Li <ye.li@nxp.com>
The factory provides a CPU UID in the OTPs and the SoM module
and the carrier board might provide additional UIDs in the GP
registers of the OTPs. Load these values in the following order
and create a serial number string:
* Board UID (GP2)
* SoM UID (GP1)
* CPU UID (UNIQUE_ID)
The string is stored in the "serial#" env variable and
exported to Linux. Further this prints the used UID to the
console which looks like this
ID: 0042152331 (Board)
or:
ID: 0030124840 (SoM)
or:
ID: 4696668CD9516886 (CPU)
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
The factory provides a CPU UID in the OTPs and the SoM module
and the carrier board might provide additional UIDs in the GP
registers of the OTPs. Load these values in the following order
and create a serial number string:
* Board UID (GP2)
* SoM UID (GP1)
* CPU UID (UNIQUE_ID)
The string is stored in the "serial#" env variable and
exported to Linux. Further this prints the used UID to the
console which looks like this
ID: 0042152331 (Board)
or:
ID: 0030124840 (SoM)
or:
ID: 4696668CD9516886 (CPU)
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
The factory provides a CPU UID in the OTPs and the SoM module
and the carrier board might provide additional UIDs in the GP
registers of the OTPs.
Provide a common function to load UIDs from arbitrary OTP
registers and generate a serial number string that is saved
in the "serial#" env variable.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Recently code was added in board_late_init() to autostart fastboot
in case of booting from USB OTG. This change was ineffective as
enabling CONFIG_BOARD_LATE_INIT got lost during upstreaming.
Fixes: 410d9ccc03 ("imx: kontron-sl-mx6ul: Autostart fastboot if booted from USB")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
This allows to print user-friendly names for the boot device
probed by SPL to the console.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
The image offset on SD/MMC devices is 33 KiB, except for eMMC boot if
fastboot is enabled. In this case it is 1 KiB. In order to make the
the bootloader universal, check the fastboot OTP boot fuse and adjust
the offset.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Add guide on how to use the Remote Processors on i.MX8M and i.MX93.
Update MAINTAINERS to include doc/board/nxp.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Heinrich Schuchardt
Kory Maincent (TI.com)andHeinrich Schuchardt
Ben WolsiefferandHeinrich Schuchardt
Simon GlassandHeinrich Schuchardt
Tom Rini
Marek VasutandTom Rini
Dmitrii SharshakovandTom Rini
Prasad KaleandTom Rini
Jan KiszkaandTom Rini
Michael WalleandTom Rini
Jonas KarlmanandTom Rini
Wolfgang WallnerandTom Rini
Kaustabh ChakrabortyandTom Rini
Raymond MaoandTom Rini
Anshul DalalandTom Rini
Ye LiandFabio Estevam
Frieder SchrempfandFabio Estevam
Peng FanandFabio Estevam