Fix ti-secure content reference from spl_am62a7_sk_dtb to
spl_am62d2_evm_dtb or AM62d dtb. Also remove redundant k3-binman.dtsi
include.
Fixes: 14dfa6b861 ("Add initial support for AM62D2-EVM")
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Moving forward, DM firmware will no longer mess with the MAIN_PLL3.
This means MAIN_PLL3 will need to be manually set to 2GHz in order for
the CPSW9G HSDIV to have the correct 250MHz output for RGMII.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Suhaas Joshi <s-joshi@ti.com> says:
This series starts by replacing hard-coded addresses in firewall
templates that are defined in k3-binman.dtsi, by Kconfigs. Using
Kconfigs makes it easier for someone to move ATF and OP-TEE to another
location, since they wouldn't have to fiddle with the firewall
configurations in dtsi files.
The rest of the commits in this series add firewall configs to each
device's dtsi files.
I have only tested this patch series with TI boards. For non-TI Sitara
boards, respective board maintainers are requested to test the relevant
patch and confirm whether it works.
To test this, I used `k3conf <read|write> <address> [<value>]`. Both of
these operations were disallowed, as expected.
Link: https://lore.kernel.org/r/20260127081652.506357-1-s-joshi@ti.com
Add firewall configurations to protect ATF and OP-TEE memory regions
from non-secure read's and write's in Phycore AM64 SOM.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
Add firewall configurations to protect ATF and OP-TEE memory regions
from non-secure reads and writes in AM64x.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
Add firewall configurations to protect ATF and OP-TEE memory regions
from non-secure read's and write's in Phycore AM62A SOM.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
Add firewall configurations to protect ATF and OP-TEE memory regions
from non-secure reads and writes in AM62A.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
Add firewall configurations to protect ATF and OP-TEE memory regions
from non-secure read's and write's in Verdin AM62P board.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
Add firewall configurations to protect ATF and OP-TEE memory regions
from non-secure reads and writes in AM62P.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
Add firewall configurations to protect ATF and OP-TEE memory regions
from non-secure read's and write's in Verdin AM62 board.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
Add firewall configurations to protect ATF and OP-TEE from non-secure
reads and writes in Phycore AM625 SOM.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
Add firewall configurations to protect ATF and OP-TEE memory regions
from non-secure reads and writes in AM62x.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
Instead of hard-coding ATF and OPTEE addresses in firewall configuration
templates, use K3_*_LOAD_ADDR. Doing so ensures that if someone moves
ATF/OPTEE regions, the change gets picked up by binman without
explicitly having to modify dts files.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Add include to avoid following build error with imx93_qsb, when
AHAB_BOOT is enabled:
.../arch/arm/mach-imx/ele_ahab.c:262:24: error: 'IMG_CONTAINER_BASE' undeclared (first use in this function); did you mean 'IMG_CONTAINER_END_BASE'?
.../arch/arm/mach-imx/ele_ahab.c:477:20: error: 'FSB_BASE_ADDR' undeclared (first use in this function); did you mean 'WDOG_BASE_ADDR'?
.../arch/arm/mach-imx/ele_ahab.c:543:20: error: 'FSB_BASE_ADDR' undeclared (first use in this function); did you mean 'WDOG_BASE_ADDR'?
Signed-off-by: Niko Mauno <niko.mauno@vaisala.com>
Switch to OF_UPSTREAM to make use of the upstream device trees.
Remove the now obsolete device tree files:
- imx8mn-var-som-symphony.dts
- imx8mn-var-som.dtsi
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
The som-eeprom alias is specific to U-Boot, and not present in upstream
linux imx8mn-var-som device tree.
Add it to the SOM U-Boot specific device tree file in preparation
for migration to OF_UPSTREAM.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Move SOM-specific stuff into a new SOM u-boot.dtsi file.
This way, it can be used by multiple boards.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Rely on serial driver calling clk_enable to enable the lpuart clk, no
need to do init_uart_clk in board_early_init_f().
Also remove board_early_init_f(), because it is empty now.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Rely on serial driver calling clk_enable to enable the lpuart clk, no
need to do init_uart_clk in board_early_init_f().
Also remove board_early_init_f(), because it is empty now.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Rely on serial driver calling clk_enable to enable the lpuart clk, no
need to do init_uart_clk in board_early_init_f().
Also remove board_early_init_f(), because it is empty now.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Select remoteproc related configs for i.MX95 EVK to support manage CM7
using 'rproc' cmd.
Update doc to show details on starting CM7 using rproc cmd.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add i.MX95 CM7 node for remoteproc usage. The dt-bindings for CM7 was
accepted, by the node has not been upstreamed to Linux device tree.
Put the node here to let the driver probe. After Linux upstream repo
has this node landed, the node in imx95-u-boot.dtsi could be removed.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
i.MX95 uses System Manager(sm) API to start/stop logical machine or cpu.
There are two modes:
M7 in a dedicated logical machine, use LMM API
M7 and A55 in same logical machine, use CPU API
Extend the driver to using LMM and CPU protocol to manage the M7 core:
- Detect using LMM or CPU API in probe using API scmi_imx_lmm_info().
- Compare linux LM ID(got using scmi_imx_lmm_info) and M7 LM ID(the ID
is fixed as 1 in SM firmware if M7 is in a separate LM),
if Linux LM ID is not same as M7 LM ID(linux and M7 in same LM), use
LMM protocol to start/stop. Whether using CPU or LMM protocol to
start/stop, the M7 status detection could use CPU protocol to detect
started or not. So in imx_rproc_is_running, use scmi_imx_cpu_started to
check the status of M7.
- For above case (2), Use scmi_imx_lmm_power_boot to detect whether
the M7 LM is under control of A55 LM.
- For above case , after using SCMI_IMX_LMM_POWER_ON to check
permission, scmi_imx_lmm_shutdown API should be called to shutdown
the M7 LM.
- Add a new ops imx_rproc_ops_sm.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add a new flag ATT_ECC which indicates the memory region needs ECC
initialization. If the flag is set, clearing the whole memory region to
initialize ECC. If ECC is not initialized, remote core will crash if
directly access the area.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
If i2c_eeprom_size fails, the error value is stored in
variable size and not ret.
Also, this commit fixes printing the error value.
Signed-off-by: Francois Berder <fberder@outlook.fr>
Peng FanandTom Rini
Paresh BhagatandTom Rini
Bryan BrattlofandTom Rini
Raymond MaoandTom Rini
Frank WunderlichandTom Rini
Suhaas JoshiandTom Rini
Niko MaunoandFabio Estevam
Hugo VilleneuveandFabio Estevam
Francois BerderandFabio Estevam