dm_eth_phy_connect_interface() is a variant of dm_eth_phy_connect() that
allows to set the used PHY mode, in case the MAC driver needs to fix it
up. The previously static dm_eth_connect_phy_handle() is renamed and
extended for this purpose.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
It is possible that we will not have enabled the options to call
spl_sata_load_image_raw so use the __maybe_unused decorator to silence
the compiler warning.
Signed-off-by: Tom Rini <trini@konsulko.com>
As part of building with "allyesconfig" we need to have the correct
default value for the sandbox architecture provided here.
Signed-off-by: Tom Rini <trini@konsulko.com>
The MCHP_PIT64B_TIMER driver is not safe to compile on 64bit platforms
such as allyesconfig on a 64bit host. Tighten the dependencies here to
the platforms which use it today.
Acked-by: Eugen Hristev <eugen.hristev@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
This driver has never been enabled and currently has build problems
related in part to incorrect out_le32 calls. Remove it.
Signed-off-by: Tom Rini <trini@konsulko.com>
While we declare some of our dummy functions as "inline" we do not also
declare them as "static" and so it is possible for the compiler to
decide to make these as global functions instead. This can lead to link
time failures in some cases, such as "allyesconfig". As these are just
dummy functions, convert them to a macro instead.
Signed-off-by: Tom Rini <trini@konsulko.com>
The MCU Ethernet Interface on J7200-EVM uses the DP83867 Ethernet PHY as
described in the section '4.9 MCU Ethernet Interface' of the J7200-EVM
User-Guide [0]. Since the config corresponding to the DP83867 PHY has not
been enabled, the Generic PHY driver is used. As a result, the RGMII delays
do not take effect leading to packet losses.
Fix this by enabling the config for the DP83867 Ethernet PHY.
[0]: https://www.ti.com/lit/ug/spruiw7a/spruiw7a.pdf
Fixes: f8c1e893c8 ("configs: j7200_evm_a72: Add Initial support")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
This series adds significant and valuable work by Mikhail Kshevetskiy to
align spi-mem with Linux 6.16. It also includes contributions to the mtd
performance patches, a work started by Miquel Raynal and improved by
Mikhail Kshevetskiy. Additionally, two patches tighten dependencies on
the Atmel driver.
The patches pass the pipeline CI:
https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/27873
Only PowerPC and LS1021A platforms can make use of RAMBOOT_PBL. Add the
dependencies to the symbol.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
During entropy evaluation, if the generated samples fail any statistical test,
then, all of the bits will be discarded, and a second set of samples will be
generated and tested.
Double the ent_delay to give more chance to pass before performing retry.
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The function cv1800b_set_tap_delay is only called by
cv1800b_execute_tuning. The latter is where we currently have the #if
guard around MMC_SUPPORTS_TUNING, and so with the option disabled we
have an unused function warning. Move the guard to cover both functions.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In order to enable and build with SPL_REGULATOR_PWM we need to have both
SPL_DM_REGULATOR and SPL_DM_PWM enabled. Build-wise, we can have SPL
have PWM regulator support without enabling it in U-Boot itself so drop
that dependency.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
When xPL_MMC_WRITE is set but also xPL_MMC_TINY is set, the function
sd_read_ssr may be unused. Guard it appropriately.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Convert device tree property parsing to use dev_read_u32(), which
handles endianness and simplifies the code.
Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan (OSS) <peng.fan@oss.nxp.com> says:
Misc update on firmware scmi:
- Typo fix
- Use io helpers
- Use PAGE_SIZE for arm64
- Add IN_USE error code
- Add more error info
- Support scmi max rx timeout in mailbox
- Add myself as scmi maintainer, AKASHI contributed most code, but
seems he is not invovled in the developement anymore, I volunteer to
help here.
Some items on list that I am thinking to add:
- align with linux kernel to use cpu_to_le32 and le32_to_cpu, but have not find
a good way to use the helpers.
- Add SCMI version negotiation as Linux Kernel
Link: https://lore.kernel.org/r/20250927-scmi-v1-0-5e9354fb3bff@nxp.com
Pin control protocol name was not added into 'protocol_name' array,
however Pin control was supported on i.MX95. So add it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Use dev_dbg to dump device name, dev_dbg also a encapsulation call
to log() and print(). So it is ok to use dev_dbg.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Per devicetree bindings:
arm,max-rx-timeout-ms indicates an optional time value, expressed in
milliseconds, representing the transport maximum timeout value for the
receive channel. The value should be a non-zero value if set.
Support this property if platform set it to a non-default value. This
property is a per SCMI property, so all channels share same value.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
In SCMI spec 3.2, there is an update:
Add IN_USE error code for usage with Pin control protocol
So add the error decoding for IN_USE.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
"Buffer too small" is too vague, dump more info to make it easier to
debug issues.
Change dev_dbg to dev_err when buffer is too small.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
It is not good practice to directly use "hdr->x" to read/write the hdr,
because the SCMI buffer may not mapped as normal memory. Following Linux
Kernel, using ioread32/iowrite32/memcpy_[from,to]io for smt header read,
write.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add the script name as a prefix to fw_addr and fw_size variables
to make sure they are always unique and won't easily conflict with
user variables.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The script based firmware loader does not use anything from the
fs_loader implementation. Separate it into its own library source
file and convert the mediatek PHY to use this separate code. This
should reduce the amount of code that is pulled in alongside the
firmware loader, as the FS loader is no longer included.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The way that the NAND driver under DM_NAND_ATMEL is probed is by the
dummy memory driver controlled by ATMEL_EBI. Rather than require that
for NAND to work both be enabled, make NAND select ATMEL_EBI and do not
prompt for ATMEL_EBI as it only triggers the probe for NAND.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
A large number of mtd drivers cannot build without access to some
platform specific header files. Express those requirements in Kconfig as
well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Enable CONFIG_OF_UPSTREAM to receive automatic device tree updates for
the Toradex SMARC iMX8MP.
Remove the now obsolete device tree files:
- imx8mp-toradex-smarc-dev.dts
- imx8mp-toradex-smarc.dtsi
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
UBI updates for 2025.10
- ubi fixes found by Andrew with Smatch
- mtd: ubi: Remove test that always fails
- fs: ubifs: Ensure buf is freed before return
- fs: ubifs: Need to check return for being an error pointer
-fs: ubifs: Fix and rework error handling in ubifs_finddir
- fix: limit copy size in ubispl found by Benedikt
- extend support for LED activity (use the LED activity also on ubi reads)
from Yegor
NXP manufacturing tools expect the device to have the NXP 0x1fc9 vendor
ID instead of 0x0525. This is the value already used by other i.MX8 and
i.MX9 boards.
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
This resyncs us with the version found in v6.17 of the Linux kernel with
the following exceptions:
- Keep our u-boot specific tests / code area.
- Keep the location of our checkpatch.rst
- Change the "use strscpy" test as we don't have that to strlcpy
- Keep debug/printf in the list for $logFunctions
- Keep checks to "env" files
- Keep our tests for strncpy/strncat
This also syncs the spdxcheck.py tool and all the associated
documentation.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[trini: Keep our strlcpy/cat check]
Signed-off-by: Tom Rini <trini@konsulko.com>
Both the ds24xxx and ds2502 have a family_supported array which is local
to the driver but was not marked as static. Mark this as static as both
best practice and to allow both to be built in "allyesconfig" for
example.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
This driver implements timer_get_boot_us() which is global namespace and
can conflict with other implementations of the function for example in
"allyesconfig". Start by limiting this driver to platforms which use it.
Signed-off-by: Tom Rini <trini@konsulko.com>
In this case, the NPCM RNG driver also provides some of the functions
that are implemented in the generic LIB_RAND file, so only allow this to
be built when that is disabled. The exynos RNG driver depends on ARM
SMCCC calls and so cannot be built outside of that. Express these
requirements in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
This driver cannot build without access to some platform specific header
files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
The LED_STATUS functionality is part of the legacy LED framework. This
cannot be enabled at the same time as the new LED API is. Make the text
prompt be clear this is legacy and add a dependency on LED being
disabled.
Signed-off-by: Tom Rini <trini@konsulko.com>
While MMU_PGPROT is currently only functional for arm64 it can be
extended for other real platforms as well. It does not however make
sense for sandbox to enable and create dummy functions for. Make this
depend on !SANDBOX.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
This define is obsolete, and bus width is now handled via
CONFIG_SYS_NAND_BUSWIDTH_16BIT option.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
For CMD_IRQ to function, we need enable/disable_interrupt functions as
well as do_irqinfo functions to be defined. Only NIOS2, PowerPC and X86
implement the latter, so correct dependencies to be opt-in not out-out
here.
Signed-off-by: Tom Rini <trini@konsulko.com>
The CMD_MP (and cmd/mp.c) command provide a "cpu" command which is
mutually exclusive from the "cpu" command provided by cmd/cpu.c and the
CPU framework. Make CMD_MP depend on CPU not being enabled.
Signed-off-by: Tom Rini <trini@konsulko.com>
In order for cmd/cache.c to link we need to add dummy icache functions
to mirror the dummy dcache functions as well as another dcache flush
function.
Signed-off-by: Tom Rini <trini@konsulko.com>
In Kconfig syntax, "!=" is a string and not numerical comparison. This
means that to check for a non-zero SPL_SIZE_LIMIT_PROVIDE_STACK value we
need to test that it is "> 0" rather than "!=" 0. This is because "0x0 >
0" is false while "0x0 != 0" is true.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini
Matthias SchifferandTom Rini
Siddharth VadapalliandTom Rini
Gaurav JainandPeng Fan
Tanmay KathpaliaandPeng Fan
Marek VasutandTom Rini
Ernest Van HoeckeandFabio Estevam
Mathieu Dubois-BriandandFabio Estevam
Kory MaincentandTom Rini
Yegor YefremovandTom Rini