Pull request efi-2024-10-rc1-3
Documentation:
* Move out-of-tree building info to HTML
* Enable ReadTheDocs addon management
* Remove FIT documentation that is elsewhere
* Update table of contents for FIT images
* Add description for more boot methods
UEFI:
* Correct finding distro device-path for media devices
* Fix typo in EFI_RT_VOLATILE_STORE description
Other:
* MAINTAINERS: Rename BOOTDEVICE
When reading a script from a network, no block device is available.
Update the implementation to support this correctly, avoiding setting
environment variables which relate only to block devices.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Add documentation for the sandbox bootmeth.
Fix up the compatible string to drop the 'extlinux' part, which is not
relevant to this bootmeth.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Add documentation for the qfw bootmeth.
Fix up the compatible string to drop the 'extlinux' part, which is not
relevant to this bootmeth.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Move the information about out-of-tree building
from README to the generated HTML documentation.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The auto-generated load options for media device do not contain a partition
node. We cannot expect the simple file protocol here.
Get the partition device-path via the loaded image protocol.
Fixes: e91b68fd6b ("efi_loader: load distro dtb in bootmgr")
Reported-by: E Shattow <lucent@gmail.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: E Shattow <lucent@gmail.com>
Before 9d0750064e (doc: Move external FIT docs into the main body), the
FIT property data-size was not a mandatory property and still it is not
expected to be set alongside the data property.
Move the data-size property to the "Conditionally mandatory property"
section, where it actually belongs.
Signed-off-by: Sam Povilus <sam.povilus@amd.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Rasmus Villemoes <rasmus.villemoes@prevas.dk> says:
This is a followup to the patches that landed in 2024.01 and nearly
made sure that source files for producing .dtbo files use the .dtso
extension. In the same release, a few new .dts files snuck in, and
there was also some test code involving .dtbo -> .dtbo.S -> .dtbo.o I
didn't really know how to handle at the time. This should finish the
job, bring us in sync with linux (at least in this respect), and drop
the .dts -> .dtbo build rule.
Add a unit test for testing the Android bootmethod.
This requires another mmc image (mmc7) to contain the following partitions:
- misc: contains the Bootloader Control Block (BCB)
- boot_a: contains a fake generic kernel image
- vendor_boot_a: contains a fake vendor_boot image
Also add BOOTMETH_ANDROID as a dependency on sandbox so that we can test
this with:
$ ./test/py/test.py --bd sandbox --build -k test_ut # build the mmc7.img
$ ./test/py/test.py --bd sandbox --build -k bootflow_android
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The only way to configure the load addresses for both bootimg and
vendor_bootimg is by using the "abootimg" command.
If we want to use the C API, there is no equivalent.
Add set_abootimg_addr() and set_avendor_bootimg_addr() so that we can
specify the load address from C.
This can be useful for implementing an Android bootmethod.
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Guillaume La Roque <glaroque@baylibre.com>
Tested-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
When calling android_image_get_dtb_by_index() using boot image v3+,
we should also pass the vendor_boot ramdisk address.
Use get_avendor_bootimg_addr() to do so.
Notes: on boot image v2, this is harmless since get_avendor_bootimg_addr()
returns -1.
for legacy implementations that don't have CMD_ABOOTIMG, add a weak
implementation to avoid linking errors.
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Guillaume La Roque <glaroque@baylibre.com>
Tested-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
[equivalent to linux commit 81d362732bac]
As a follow up to the series allowing DTB overlays to built from .dtso
files. Now that all overlays have been renamed, remove the ability to
build from overlays from .dts files to prevent any files with the old
name from accidental being added.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Distinguish more clearly between source files meant for producing .dtb
from those meant for producing .dtbo.
Note that in the linux tree, all device tree overlay sources have been
renamed to .dtso, and the .dts->.dtbo rule is gone since v6.5 (commit
81d362732bac). So this is also a step towards staying closer to linux
with respect to both Kbuild and device tree sources, and eventually
eliminating all .dts -> .dtbo instances.
This also matches the documentation update done in commit 4fb7e570d6.
Cc: Masahisa Kojima <kojima.masahisa@socionext.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Distinguish more clearly between source files meant for producing .dtb
from those meant for producing .dtbo.
In this case, the files are really meant to be compiled to .dtbo ->
.dtbo.S -> .dtbo.o that get embedded in the image, which means that
the begin/end symbols generated by the makefile rule changes to
__dtbo_ rather than __dtb, so the consuming .c file needs updating,
but this should not result in any functional change.
Note that in the linux tree, all device tree overlay sources have been
renamed to .dtso, and the .dts->.dtbo rule is gone since v6.5 (commit
81d362732bac). So this is also a step towards staying closer to linux
with respect to both Kbuild and device tree sources.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
[linux commit 941214a512d8, modified for U-Boot by removing the
include of vmlinux.lds.h and replacing STRUCT_ALIGNMENT by 16.]
DTB files can be built into the kernel by converting them to assembly
files then assembling them into object files. We extend this here
for DTB overlays with the .dtso extensions.
We change the start and end delimiting tag prefix to make it clear that
this data came from overlay files.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Distinguish more clearly between source files meant for producing .dtb
from those meant for producing .dtbo. No functional change, as we
currently have rules for producing a foo.dtbo from either foo.dts or
foo.dtso.
Note that in the linux tree, all device tree overlay sources have been
renamed to .dtso, and the .dts->.dtbo rule is gone since v6.5 (commit
81d362732bac). So this is also a step towards staying closer to linux
with respect to both Kbuild and device tree sources.
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Marek Vasut <marex@denx.de>
Remove the leftover Amlogic GX/G12 bindings headers that
maked the v6.10 upstream DT fail to build.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
According to recently firmware handsoff spec [1]'s "Register usage at handoff
boundary", Transfer List's signature value was changed from 0x40_b10b
(3 bytes) to 4a0f_b10b (4 bytes).
As updating of TL's signature, register value of x1/r1 should be:
In aarch32's r1 value should be
R1[23:0]: set to the TL signature (4a0f_b10b -> masked range value: 0f_b10b)
R1[31:24]: version of the register convention == 1
and
In aarch64's x1 value should be
X1[31:0]: set to the TL signature (4a0f_b10b)
X1[39:32]: version of the register convention == 1
X1[63:40]: MBZ
(See the [2] and [3]).
This patch fix problems:
1. breaking X1 value with updated specification in aarch64
- change of length of signature field.
2. previous error value set in R1 in arm32.
- length of signature should be 24, but it uses 32bit signature.
This patch is a breaking change. It works only TF-A is updated.
Link: https://github.com/FirmwareHandoff/firmware_handoff [1]
Link: https://github.com/FirmwareHandoff/firmware_handoff/issues/32 [2]
Link: https://github.com/FirmwareHandoff/firmware_handoff/commit/5aa7aa1d3a1db75213e458d392b751f0707de027 [3]
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Reviewed-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
A security issue exists with zipp before v3.19.1, and the current
release is now v3.19.2. While the change in versions numbers is large, a
manual inspection of the changelog shows that it's not as big as might
be implied.
Reported-by: GitHub dependabot
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
