Update the spi_nor_read() function based on the config SPI_FLASH_BAR
and update the length and bank calculation by spliting the memory of
16MB size banks only when the address width is 3byte.
Fix the read issue for 4byte address width by passing the entire
length to the read function.
Fixes: 5d40b3d384 ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Pull request doc-2025-01-rc6
Fix a number of typos
* cmd: bootmenu typo 'read'
* cmd/rng: fix long help text
* crypto: typo volatge
* board: freescale: typo volatge
* scripts: add volatge to spelling.txt
* doc: fit: Format image tree source example
The example in kernel_fdt.rst is inconsistently indented, making it
difficult to read.
Indent the example with the same standard as the other examples:
Four spaces for the ReST code block and for every nesting level.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
The number of bytes may only be specified if a device number id provided.
Correct the formatting.
Acked-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
In case an rswitch port is described as disabled in DT, do not
register it as ethernet device in U-Boot. This way, such ports
cannot be accessed from U-Boot command line.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Move CONFIG_ENV_OVERWRITE=y into commont renesas_rcar.config to make sure
this configuration option is consistently enabled on all of Renesas R-Car
Gen2, Gen3, Gen4. Currently this option is not enabled on Gen4, this fix
corrects that omission.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
TFTP transfers of large files, for example 128 MiB, can sporadically
get stuck and the transfer slows down considerably.
This happens because the TX DMA descriptor in DRAM becomes out of sync
with the view of the TX DMA descriptor content from the CPU side, which
is viewed through the CPU caches. In order to guarantee these two views
are consistent, the cache over TX DMA descriptor that has possibly been
written by the rswitch hardware must first be invalidated, only then can
the descriptor be cleared and updated by the CPU, and finally the cache
over that area must be flushed back into DRAM to make sure the rswitch
hardware has consistent view of the updated descriptor content.
The very first invalidation operation was missing, which led to sporadic
corruption of the TX DMA descriptor. Fix it, add the missing invalidation
operation.
Reported-by: Enric Balletbo i Serra <eballetb@redhat.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Enric Balletbo i Serra <eballetb@redhat.com>
TFTP transfer size can be used to re-size the TFTP progress bar on
single line based on the server reported file size. Enable it by
default for Renesas hardware to avoid long scrolling walls of '#'
character during long TFTP transfers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Early revisions of the R-Car V4M Series Hardware User’s Manual
contained an incorrect formula for the CPU core clocks:
ZCnφ = (PLL2VCO x 1/2) x mult/32
Dang-san fixed this by using CLK_PLL2_DIV2 instead of CLK_PLL2 as the
parent clock.
In Rev.0.70 of the documentation, the formula was corrected to:
ZCnφ = (PLL2VCO x 1/4) x mult/32
As the CPG Block Diagram now shows a separate 1/4 post-divider for PLL2,
the use of CLK_PLL2_DIV2 is a recurring source of confusion. Hence get
rid of CLK_PLL2_DIV2, and include the proper 1/4 post-divider in the
invocation of the DEF_GEN4_Z() macro, like is done on other R-Car Gen4
(and Gen3) SoCs.
Ported from Linux commit
92850bed9d4d ("clk: renesas: r8a779h0: Drop CLK_PLL2_DIV2 to clarify ZCn clocks")
Reported-by: Vinh Nguyen <vinh.nguyen.xz@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/0d2789cac2bf306145fe0bbf269c2da5942bb68f.1728377724.git.geert+renesas@glider.be
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
One can use ccache by keeping ccache in PATH or by providing the full
path to ccache as well. Providing the full path to ccache fails as the
current regex tries to look for ccache being the initial token during
filtering.
Do a greedy search to remove anything before ccache for regex matching.
Fixes: 04b1d84221 ("Makefile: fix empty MK_ARCH when using ccache")
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
commit e27bddff4b ("imx8m: Restrict usable memory to space below 4G boundary")
tried to adjust the usable memory limits on a 4GB boundary.
ram_top is described as 'top address of RAM used by U-Boot' and we want
to preserve that. This is defined as a phys_addr_t and unfortunately
its size differs across architectures. This has lead us to a weird
state where 32bit boards define it 'SZ_4GB - 1' and 64bit boards as
'SZ_4GB' unless it was otherwise defined.
With some recent LMB changes and specifically
commit 1a48b0be93 ("lmb: prohibit allocations above ram_top even from same bank")
the board fails to boot properly although the commit above is correct
since it's making sure that no memory above ram_top is usable -- but
added to our memory map so EFI can hand it over to the booted OS.
The reason for that is that during the LMB init we add all usable memory
in lmb_add_memory(). In that function any memory above ram_top gets added
as 'reserved' for LMB. With the current values tha's set to 0xFFFF_FFFF
for this board. Later LMB is trying to protect the memory area U-Boot lives
in with lmb_reserve_common(). The latter fails though since it tries to
add U-Boot top (which is 0xFFFF_FFFF as well) to U-Boot 'bottom'. This call
will fail since 1 byte of that memory range is already marked as 'reserved'.
Since we are close to the release, LMB seems to assume that the address
is rounded up and is the 'next address' and so does parsing and adding
memory ranges from DT files, bump the ram_top of the board by 1byte.
In the long run we should change all of the above and have 32b and 64b
platforms define ram_top identically.
Add a Fixes tag although the commit is correct, so people can figure out
the broken scenarios in the future.
Suggested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Fixes: commit 1a48b0be93 ("lmb: prohibit allocations above ram_top even from same bank")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reported-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Closes: https://lore.kernel.org/all/20241216114231.qpfwug3zfqkxn3d5@joaog-nb.corp.toradex.com/
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Fixes: 74f88b7221 ("ARM: imx: imx8m: Fix board_get_usable_ram_top()")
("Enable EFI_LOADER_BOUNCE_BUFFER") is not the correct fix for the
problem it describes.
The change of memory addressing leading to side-effects in commit
22f2c9ed9f ("efi: memory: use the lmb API's for allocating and
freeing memory") is remedied by commit 1a48b0be93 ("lmb: prohibit
allocations above ram_top even from same bank").
This reverts commit 9c792ab336.
eth_get_dev() returns NULL if no network device is available.
Not checking the return value leads to a crash when the device
pointer is dereferenced.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
If the dns command cannot find a network interface, we should return
CMD_RETFAIURE and not -1 (CMD_RET_USAGE).
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
There have been a few changes to the areas that this file documents
without having regenerated the file. Do so now.
Signed-off-by: Tom Rini <trini@konsulko.com>
The content of CONFIG_OF_SPL_REMOVE_PROPS is the same in both
STM32MP15xx DHCOM and DHCOR defconfigs, deduplicate the content
into stm32mp15_dhsom.config .
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The access-controllers DT property is not useful in STM32MP15xx SPL,
remove it to reduce SPL control DT size. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Commit 2a00d73d08 ("spl: mmc: Try to clean up raw-mode options")
broke booting from SD card on STM32MP15xx , reinstate raw mode SD
boot configuration options and select the correct raw mode partition
for STM32MP15xx to fix SD boot on STM32MP15xx DHSOM.
Fixes: 2a00d73d08 ("spl: mmc: Try to clean up raw-mode options")
Reported-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The root oscillators reference used to be in rcc node since
3d15245502 ("ARM: dts: stm32mp1: explicit clock reference needed by RCC clock driver")
however this is not part of upstream stm32mp151.dtsi . The
RCC driver does need this reference, reinstate it locally.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The root oscillators reference used to be in rcc node since
3d15245502 ("ARM: dts: stm32mp1: explicit clock reference needed by RCC clock driver")
however this is not part of upstream stm32mp151.dtsi . The
RCC driver does need this reference, reinstate it globally.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Since commit 6534d26ee9 ("lmb: do away with arch_lmb_reserve()"),
STM32F746-disco hangs when loading device tree just before starting
kernel:
Retrieving file: /stm32f746-disco.dtb
Kernel image @ 0xc0008000 [ 0x000000 - 0x19ae00 ]
Flattened Device Tree blob at c0408000
Booting using the fdt blob at 0xc0408000
Working FDT set to c0408000
Loading Device Tree to c05f8000, end c05ff71c ...
Adjust STACK_SIZE to 16KB for STM32 MCUs (F4/F7 and H7) boards
to fix kernel boot process as some of these boards embeds a limited
amount of memory.
Fixes: 6534d26ee9 ("lmb: do away with arch_lmb_reserve()")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Previously, all LMB marked with LMB_NOMAP (above and below ram_top)
are considered as invalid entry in TLB.
Since commit 1a48b0be93 ("lmb: prohibit allocations above ram_top
even from same bank") all LMB located above ram_top are now marked
LMB_NOOVERWRITE and no more LMB_MAP.
This area above ram_top is reserved for OPTEE and must not be cacheable,
otherwise this leads to a Panic on some boards (Issue on STM32MP135F-DK).
Restore previous behavior by marking invalid entry all TLB above ram_top.
Fixes: 1a48b0be93 ("lmb: prohibit allocations above ram_top even from same bank")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
cc: Sughosh Ganu <sughosh.ganu@linaro.org>
Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org>
I have an original rpi installed now, loaded with OS Lite (32-bit)
Add an entry for it so that it can be used for testing.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This patch was written before the XPL change-over. Update the Makefile
condition to the new way.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: ae3b5928d6 ("x86: coreboot: Allow building an expo for...")
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
The logic in get_details() retrieves the default source directory from
the Labgrid settings. This is convenient for interactive use, since it
allows pytests to be run from any directory and still find the source
tree.
However, it is not actually correct.
Gitlab sets the current directory to the source tree and expects that to
be used. At present it is ignored. The result is that Gitlab builds
whatever happens to be in the default source directory, ignoring the
tree it is supposed to be building.
Fix this by using the directory of the source tree, always. This is
obtained by looking at the grandparent of the conftest.py file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
Fixes: bf89a8f1fc ("test: Introduce the concept of a role")
Tested-by: Tom Rini <trini@konsulko.com>
In case DM drivers probe earlier than board clock setup is done
init of basic clocks should be done in CAR driver probe as well.
Add it to avoid possible clock related problems.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Return PLL id into struct clk if PLL is parsed from device
tree instead of throwing an error. Allow requesting PLL
clock rate via get_rate op.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
On 64bit systems the timer value might be truncated to a 32bit value
causing malfunctions. For example on ARM the timer might start from 0
again only after a cold reset. The 32bit overflow occurs after a bit
more than 49 days (1000 Hz counter) so booting after that time may lead
to a surprise because the board might become stuck requiring a cold
reset.
Signed-off-by: Ronald Wahl <ronald.wahl@legrand.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Venkatesh Yadav AbbarapuandTom Rini
Heinrich Schuchardt
J. NeuschäferandHeinrich Schuchardt
Marek Vasut
Geert UytterhoevenandMarek Vasut
Manorit ChawdhryandTom Rini
Ilias ApalodimasandTom Rini
E ShattowandTom Rini
Nicolas BelinandMattijs Korpershoek
Patrice Chotard
Marek VasutandPatrice Chotard
Simon GlassandTom Rini
Svyatoslav RyhelandTom Rini
Ronald WahlandJaehoon Chung