Greg Malysa <malysagreg@gmail.com> says:
This series adds all of the supported peripheral drivers for the sc5xx
series of SoCs from Analog Devices and other drivers that are used by
the evaluation kits, such as a GPIO expander used by the EZLITE carrier
boards. This series passes gitlab CI tests.
Link: https://lore.kernel.org/r/20250226173150.13198-1-malysagreg@gmail.com
This adds the necessary dt-bindings and documentation to use the ADI
SC5xx pinctrl driver in a device tree. It is not yet available upstream
in the Linux kernel. Eventually, it will be moved there.
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Enable PCI enumeration by default to get the Bochs display driver up
and running before the boot medium is scanned.
This is just to enhance the user-experience while booting the machine.
TEST: U-Boot logo, version, log output and the U-Boot shell is visible
on the display device.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
qemu's sbsa-ref is always using a 64bit CPU and the PCI prefetch MMIO
window is located above 4GiB, thus always enable SYS_PCI_64BIT.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Legacy PCI devices, like qemu's Bochs VGA device, are allowed to have
prefetchable 32-bit BARs, while PCIe devices are not allowed to have
32-bit prefetchable BARs. Typically prefetchable BARs are 64-bit and
typically the prefetch MMIO window is also 64-bit and placed above
4GiB, as it's the case on qemu sbsa-ref.
Currently the U-Boot code assumes that prefetchable BARs are
64-bit BARs and always tries to assign them into the prefetch
MMIO window.
When a 32-bit BAR is marked as prefetch, but the prefetch area is
not within the first 4GiB of the address space, then downgrade the
BAR and place it in the non-prefetch MMIO window.
For prefetch BARs there's no downside on being placed in non prefetch
MMIO areas, besides the possible slower performance when a driver tries
to map it Write-Combine.
TEST: Fixes pci_auto on QEMU sbsa-ref fails to autoconfigure BAR0.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
The value written to the RFLR register includes the length of the CRC
data at the end of each Ethernet frame. So we need to increase the value
written to this register to ensure that we can receive full size frames.
While we're here we can also copy the improved comment from the Linux
kernel.
Fixes: 8ae51b6f32 ("net: ravb: Add Renesas Ethernet RAVB driver")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Fix comment
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Following on from commit 9a699a0a0d ("clk: rzg2l: Ignore enable for
core clocks"), we also need to ignore attempts to disable core clocks to
avoid the need for conditionals around clk_disable_bulk() calls in
drivers which support both RZ/G2L and other Renesas SoCs.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
These functions are no longer necessary, remove them.
The struct bb_miiphy_bus is no longer necessary either,
remove it as well.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Use mdio_alloc() again to allocate MDIO bus. This is possible
because all the miiphybb parameters and ops passing is handled in
at bb_miiphy_read()/bb_miiphy_write() level.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Use mdio_alloc() again to allocate MDIO bus. This is possible
because all the miiphybb parameters and ops passing is handled in
at bb_miiphy_read()/bb_miiphy_write() level.
This also fixes previously missed bb_miiphy_free() in .remove
callback of this driver. which does not pose a problem anymore.
Fixes: 08eefb5e79 ("net: sh_eth: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Use mdio_alloc() again to allocate MDIO bus. This is possible
because all the miiphybb parameters and ops passing is handled in
at bb_miiphy_read()/bb_miiphy_write() level.
This also fixes previously missed bb_miiphy_free() in .remove
callback of this driver. which does not pose a problem anymore.
Fixes: 079eaca6e7 ("net: ravb: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Use mdio_alloc() again to allocate MDIO bus. This is possible
because all the miiphybb parameters and ops passing is handled in
at bb_miiphy_read()/bb_miiphy_write() level.
This also fixes previously missed bb_miiphy_free() in .remove
callback of this driver. which does not pose a problem anymore.
Fixes: cbb69c2faf ("net: designware: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Remove the priv member from struct bb_miiphy_bus and its assignment
from drivers. This turns struct bb_miiphy_bus int struct mii_dev
wrapper, to be cleaned up next.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Access to MDIO bus private data can be provided by both
struct mii_dev .priv member and struct bb_miiphy_bus .priv
member, use the former directly and remove .priv from the
later. Drop unused bb_miiphy_getbus(). This removes any
dependency on struct bb_miiphy_bus from the miiphybb code,
except for helper functions which will be removed later.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
The access to struct bb_miiphy_bus_ops via ops pointer in
struct bb_miiphy_bus is not necessary with wrappers added
in previous patch. Pass the ops pointer directly to both
bb_miiphy_read() and bb_miiphy_write() functions.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Do not call bb_miiphy_read()/bb_miiphy_write() accessors directly
in drivers, instead call them through wrapper functions. Those are
meant to be used as function parameter adaptation layer between
struct mii_dev callback function parameters and what the miiphybb
does expect and will soon expect. This is a preparatory patch, no
functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Move miiphybb operations into separate struct bb_miiphy_bus_ops
structure, add pointer to struct bb_miiphy_bus_ops into the base
struct bb_miiphy_bus and access the ops through this pointer in
miiphybb generic code. The variable reshuffling in miiphybb.c
cannot be easily avoided.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
The RZN1 symbol name is CONFIG_RZN1, there is no CONFIG_ARCH_RZN1.
Since RZN1 enables CONFIG_ARCH_RENESAS as well, remove the special
RZN1 entry from Makefile, the RZN1 pinctrl driver will still be
pulled in via CONFIG_ARCH_RENESAS.
Fixes: e4aea57fa7 ("pinctrl: renesas: add R906G032 driver")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
The Renesas R-Car Gen3 Salvator-X(S) boards contain USB micro-B port
on which the USBHS controller is accessible. Enable the USBHS UDC
driver to make this port usable, enable UMS USB Mass Storage support
to make it possible to expose block devices as USB Mass Storage to
Host PC.
The USB VID/PID is picked from R-Car Series, 3rd Generation reference
manual Rev.2.00 chapter 19.2.8 USB download mode, and matches R-Car H3
BootROM USB download mode VID/PID.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
For the Tegra 2, similar to other Tegra SoC generations, 'bootph-all'
must be applied to both display controllers.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
While PLLD/D2 is the nominal parent clock, all derived clocks are generated
from its single output, plld_out0, which is PLLD/D2 divided by two. Direct
use of PLLD/D2 is absent in peripheral clock configurations. Therefore,
clock derivation formulas must take in account this division.
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Older EDID timing algorithms relied solely on detailed timings, typically
optimized for a display's native resolution. This caused issues with newer
4K panels on older hardware, which couldn't handle those high resolutions.
To address this, the algorithm now also considers standard timings, offering
lower, compatible resolutions. Future improvements may include checking
established timings for even broader compatibility.
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The Mi Pad is a tablet computer based on Nvidia Tegra K1 SoC which
originally ran the Android operating system. The Mi Pad has a 7.9" IPS
display with 1536 x 2048 (324 ppi) resolution. 2 GB of RAM and 16/64 GB of
internal memory that can be supplemented with a microSDXC card giving up to
128 GB of additional storage.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tom Rini
Nathan Barrett-MorrisonandTom Rini
Greg MalysaandTom Rini
Patrick RudolphandTom Rini
Paul BarkerandMarek Vasut
Svyatoslav Ryhel
Jonas SchwöbelandSvyatoslav Ryhel
Jerome Forissier