Update defconfig to enable features included in pending upstream DT and
implement board_fit_config_name_match() to load correct DT for LTS and
non-LTS version of the NanoPC-T6.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Change to use vdd-microvolts prop value as voltage reference when the
supply regulator is missing or when DM_REGULATOR=n is used.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
When DM_REGULATOR=n is used the device_get_supply_regulator() function
always return -ENOSYS.
Change to treat missing support for regulators as a missing optional
vdd/vss-supply regulator to reduce error messages being logged.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The SPI flash node has been added in upstream DT, drop all props beside
bootph-* props from the SPI flash related nodes from u-boot.dtsi.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
In the LTS (2310) version the miniPCIe slot got removed and USB 2.0
setup has changed. There are two external accessible ports and two ports
on the internal header.
There is an on-board USB hub which provides:
- one external connector (bottom one)
- two internal ports on pin header
- one port for m.2 E connector
The top USB 2.0 connector comes directly from the SoC.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-4-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: db1dcbe5f752d423421f77d54d246398b196f670 ]
(cherry picked from commit f4a834fbc8cdb40fddd63d083e8d1c6189ba62dc)
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The SPI flash node has been added in upstream DT, drop all props beside
bootph-* props from the SPI flash related nodes in u-boot.dtsi.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The SPI flash node has been added in upstream DT, drop all props beside
bootph-* props from the SPI flash related nodes in u-boot.dtsi.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Hardkernel ODROID-M1S is a single-board computer based on Rockchip
RK3566 SoC. It features e.g. 4/8 GB LPDDR4 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0.
Features tested on a ODROID-M1S 8GB rev1.0 20230906:
- SD-card boot
- eMMC boot
- Ethernet
- PCIe/NVMe
- USB gadget
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Hardkernel ODROID-M1S is a single-board computer based on Rockchip
RK3566 SoC. It features e.g. 4/8 GB LPDDR4 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0.
Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240827211825.1419820-5-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 10dc64fe0f980c47c7e747885ddf7a8c12780337 ]
(cherry picked from commit f811548e758b52896f725753086c42b49dc42c0d)
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The vendor prefix for Hardkernel ODROID-M1 is incorrectly listed as
rockchip. Use the proper hardkernel vendor prefix for this board, while
at it also drop the redundant soc prefix.
Fixes: fd3583267703 ("arm64: dts: rockchip: Add Hardkernel ODROID-M1 board")
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240827211825.1419820-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 735065e774dcfc62e38df01a535862138b6c92ed ]
(cherry picked from commit e7259a2c4a6f2ebdfc96b8bbffc77fe67604b11f)
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
After the full convertion of usb gadget interrupt handling to
usb_gadget_generic_ops, it is now possible to use DM_USB_GADGET,
DWC2_OTG and DWC3_GENERIC together without causing a build error.
Change to use USB_DWC3_GENERIC instead of USB_XHCI_DWC3 to complte the
migration initiated in commit 1bc4e8eb1d ("rockchip: Migrate to use
DM_USB_GADGET on RK3328"). No functional change is intended.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Hardkernel ODROID-M2 is a single-board computer based on Rockchip
RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C.
Features tested on a ODROID-M2 16GB rev1.0 20240611:
- SD-card boot
- eMMC boot
- Ethernet
- PCIe/NVMe
- USB gadget
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Hardkernel ODROID-M2 is a single-board computer based on Rockchip
RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C.
Add initial support for eMMC, SD-card, Ethernet, PCIe and USB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240901112020.3224704-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: ce48b8c976ce439c336def6e06bf8224a8ff9125 ]
(cherry picked from commit 7ba62d8b4cb010c6fcb7077550b46d5f5fb5af6d)
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Remove config options for ARM SCMI. It is not required to boot the
board and when using the most recent mainline A-TF it actually causes
the device to freeze during boot due to missing SCMI support.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Some of the Powkiddy devices switched to using a different vendor for
the vdd_cpu regulator. Unfortunately the device does not have a new
revision to denote this, so users have no way of knowing in advance.
Add code to detect if a device is present at addresses 0x1c or 0x40 on
the i2c0 bus and update the devicetree if needed.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Refactor the board detection logic (again) to make it compatible with
the upstream device-trees, and switch to OF_UPSTREAM.
Now the device boots with the device-tree for the 353P, and then
loads the correct device tree (of 10) in the later stages of SPL.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add dedicated getter and setter for SCLK_UART0_PMU.
This allows the driver to correctly handle UART0 clocks, and thus
it fixes the issues with UART0 not working in case DEBUG_UART is
disabled.
Unlike other Rockchip SoCs, i.e. rk3399, in the PX30 the default
clock source for UART is GPLL, instead of external oscillator.
If the DEBUG_UART is enabled, the clock source is changed in
board_debug_uart_init function to 24Mhz oscillator, which also
matches the fallback value obtained from DT node.
In case the DEBUG_UART is disabled, the UART clock source remains
default, and the DM serial driver wrongly configures the baud rate,
resulting in broken communication.
By implementing the UART clock getter/setter, the serial driver
can probe the actual configuration and corectly configure itself.
The DEBUG_UART settings now should not affect it.
The driver supports GPLL and 24M oscillator. NPLL and USBPHY480M
sources, that are managed by CRU, are not yet handled, as likely
they won't be used in real scenarios.
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Basically, Radxa's boards are intended to turn LEDs on at U-Boot.
add `default-state = "on"` to u-boot.dtsi.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Basically, Radxa's boards are intended to turn LEDs on at U-Boot.
enable gpio-leds driver and led command.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
ROCK Pi 4 series and ROCK 4C+ cannot share .dtsi file because 4C+ is
different board.
add rk3399-rock-pi-4-u-boot.dtsi contents and remove dependency of it.
no functional change is intended.
Fixes: 71a95e2efd ("arm: dts: rockchip: add Radxa ROCK 4C+")
Suggested-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The function prototypes that are defined in the header most likely has
to be marked as static inline. This helps avoiding the compiler warnings:
include/mux.h:120:14: warning: no previous prototype for ‘mux_control_states’ [-Wmissing-prototypes]
include/mux.h:125:18: warning: no previous prototype for ‘mux_control_select’ [-Wmissing-prototypes]
include/mux.h:133:5: warning: no previous prototype for ‘mux_control_deselect’ [-Wmissing-prototypes]
include/mux.h:138:21: warning: no previous prototype for ‘mux_control_get’ [-Wmissing-prototypes]
include/mux.h:143:6: warning: no previous prototype for ‘mux_control_put’ [-Wmissing-prototypes]
include/mux.h:147:21: warning: no previous prototype for ‘devm_mux_control_get’ [-Wmissing-prototypes]
include/mux.h:153:5: warning: no previous prototype for ‘dm_mux_init’ [-Wmissing-prototype ]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some functions are not used anywhere except the same file
where they are defined. Mark them static. This helps avoiding
the compiler warnings:
cmd/nvedit.c:201:5: warning: no previous prototype for ‘do_env_ask’ [-Wmissing-prototypes]
cmd/nvedit.c:315:5: warning: no previous prototype for ‘do_env_callback’ [-Wmissing-prototypes]
cmd/nvedit.c:384:5: warning: no previous prototype for ‘do_env_flags’ [-Wmissing-prototype ]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
There are no users of the blk_create_device() function outside the uclass.
Let's make it static. This will ensure that new block drivers will use
blk_create_devicef().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
By using blk_create_devicef() instead of blk_create_devicef() the driver
can be simplified and brought into line with other block device drivers.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Johan Jonker <jbx6244@gmail.com>
Add the latest 4000 MT/s DDR config generated by
Jacinto7_DDRSS_RegConfigTool Rev 0.11 for J722S , make it the
default config and update A53 default clock to 1.4 GHz matching
the default speed grade (K).
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
The bootflow_menu.c code depends on e.g. scene_txt_set_font(),
which is only built when CONFIG_EXPO is enabled. Introduce new
Kconfig symbol BOOTSTD_MENU which depends on EXPO to prevent
triggering errors like these in case e.g. CONFIG_VIDEO=n :
"
boot/bootflow_menu.c:158:(.text+0x8851): undefined reference to `scene_txt_set_font'
"
Make the symbol depend on BOOTSTD_FULL as well to get rid of
the Makefile dependency workaround. Since BOOTSTD_FULL is not
available in SPL, do not define SPL variant of BOOTSTD_MENU.
Fix up bootflow test accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
CI: https://dev.azure.com/sr0718/u-boot/_build/results?buildId=378&view=results
* watchdog: gpio_wdt: add support for stoppable devices (Rasmus)
* watchdog: Add DaVinci's watchdog support (Bastien)
* cyclic: disentangling cyclic API from schedule() (Rasmus)
* watchdog: introduce separate SPL symbol for WDT_GPIO (Rasmus)
Currently, enabling WDT_GPIO on a board which uses SPL, but does not
have SPL_WDT, SPL_DM_GPIO or SPL_OF_CONTROL enabled, breaks the build.
Make it possible to use the WDT_GPIO driver on such boards by
introducing a separate symbol controlling whether the driver is built
for SPL. Make it default to WDT_GPIO such that boards that already
have it enabled and all the SPL prerequisites satisfied will continue
to have it in SPL.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Nothing in cyclic.h is needed to define struct global_data, so do not
include that header.
If any .c file relies on getting cyclic.h through asm/global_data.h,
it needs to include it itself.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
This TU currently relies on getting a declaration of schedule()
through some nested include. Include the proper header directly.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
These TUs currently rely on getting a declaration of schedule()
through some nested include. Include the proper header directly.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
This TU currently relies on getting a declaration of schedule()
through some nested include. Include the proper header directly.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
These library routines obviously do not make use of the
cyclic_register() etc. API, but do need to call schedule(). Include
the proper header.
Eventually, their ifdef logic should be updated to avoid talking about
CONFIG_WATCHDOG.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Nobody relies on getting the cyclic API declared by including the
watchdog.h header, but for historical reasons, many TUs include
watchdog.h to get a declaration of schedule(). Now that we have a
dedicated header for just that, include that header instead of
cyclic.h.
Eventually, all TUs that call schedule() should themselves include
u-boot/schedule.h, but this is a step towards getting rid of
unnecessary include statements in cyclic.h and global_data.h.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
The only caller left is schedule(); everybody outside cyclic.c now
calls or references schedule().
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
This is the last place outside of cyclic.c that references
cyclic_run() directly. Replace by schedule(), so that cyclic_run() can
be made private. This also better matches what I believe commit
29caf9305b ("cyclic: Use schedule() instead of WATCHDOG_RESET()")
intended to do.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Prior to commit 29caf9305b ("cyclic: Use schedule() instead of
WATCHDOG_RESET()") we had
/* Currently only needed for fs/cramfs/uncompress.c */
static inline void watchdog_reset_func(void)
{
WATCHDOG_RESET();
}
and .outcb was set to that watchdog_reset_func(). Said commit changed
that .outcb to cyclic_run instead of schedule, which would otherwise
match all the other WATCHDOG_RESET replacements done. As the
HW_WATCHDOG case is not handled by cyclic_run, this seems to be an
oversight.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Modifying a generic header like watchdog.h, removing not directly used
asm/ptrace.h header relies on whoever includes it to already have
included something that defines the type ulong.
Make the asm/ptrace.h header self-contained by including the proper
header.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
This makes use of the cyclic API but relies on implicitly getting the
appropriate declarations through some nested include. Include the
cyclic.h header directly.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
I noticed an "unnecessary" include of <cyclic.h> in
global_data.h, in the sense that nothing in cyclic.h is needed in
order to define 'struct global_data'.
Well, it's not unnecessary, as it implicitly ensures that everybody
gets a declaration of schedule(), and schedule() is (obviously) called
all over the tree. Almost none of those places directly include
<cyclic.h>, but for historical reasons, many do include
<watchdog.h> (most schedule() instances are replacements of
WATCHDOG_RESET()).
However, very few TUs actually need the declarations of the
cyclic_register() and struct cyclic_info, and they also don't really
need anything from the watchdog.h header.
So introduce a new header which just contains a declaration of
schedule(), which can then be included from all the places that do
call schedule(). I removed the direct reference to cyclic_run(),
because we shouldn't have two public functions for doing roughly the
same without being very explicit about when one should call one or the
other.
Testing of later patches that explicitly include <schedule.h> when
schedule() is used revealed a problem with host tool build on win32,
which apparently picked up a host <schedule.h>. To avoid that problem,
put the new header in include/u-boot/ and hence make the include
statements say <u-boot/schedule.h>.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
