The function disable_thermal_cpu_nodes() corrupts the cooling-device
property.
For example, booting an i.MX93 devices with only one A55 core (IMX93x1)
with the cooling-device property set to:
$ dtc -I dtb foo.dtb | grep cooling-device
cooling-device = <0x08 0xffffffff 0xffffffff 0x09 0xffffffff 0xffffffff>;
Linux shows the following error at boot:
[ 1.715189] OF: /thermal-zones/cpu-thermal/cooling-maps/map0: could not find phandle 1083699869
[ 1.723977] thermal_sys: Add a cooling_device property with at least one device
[ 1.731285] thermal thermal_zone0: binding zone cpu-thermal with cdev thermal-devfreq-0 failed:-2
because the cooling-device property in the device tree passed to the
kernel is
$ dtc -I dtb /sys/firmware/fdt | grep cooling-device
cooling-device = <0x4097f29d 0x00 0xb05aef9d>;
The issue is because the wrong variable type is passed to the function
fdt_setprop() called in the function disable_thermal_cpu_nodes(). With
the variable type fixed, the error at boot is gone and the property is
properly set:
$ dtc -I dtb /sys/firmware/fdt | grep cooling-device
cooling-device = <0x08 0xffffffff 0xffffffff>;
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Capricorn boards have WDT (WDT_SIEMENS_PMIC) and U-Boot is not configured
to trigger the WDT. Enable the "wdt" command to be able to stop the WDT
from the command line.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Add instructions on how to build and package OP-TEE for the
phycore-imx8mm based boards. The build instructions are identical for
phyGATE-Tauri-L and phyBOARD-Polis.
Also fix missig '-' for TF-A build instructions.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Add documentation for the phyBOARD-Pollux i.MX 8M Plus on OP-TEE
integration.
Also add missing '-' to TF-A build instruction while at it.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Add tee node in SoC u-boot device trees. Use a kconfig entry to specify
load and entry addresses for the op-tee image in the respective
defconfig.
Default IMX8M_OPTEE_LOAD_ADDR is supplied. To keep it simple, the same
addresses are used for each SoC as are defined in upstream tf-a
(BL32_BASE) [1].
[1] https://github.com/ARM-software/arm-trusted-firmware/tree/master/plat/imx/imx8m
Signed-off-by: Yannic Moog <y.moog@phytec.de>
i.MX93-11x11-EVK has switched to use upstream device tree, and use
"adi,adp5585". Since i.MX93-11x11-EVK is the only user of this driver,
so it is safe to drop "adp5585".
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Enable dynamic settings to mmcdev and mmcroot for i.MX8MQ-EVK
Since we are here, clean up the including headers
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add support for K230 CanMV board with serial console and usb otg
support. It can boot via vendor's u-boot-spl and boot into Linux
via tftp through the onboard RTL8152.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add Canaan K230 SoC with sysreset support, running without cache
enabled.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Canaan Kendryte K230 SoC instantiates a dwc2 v4.30a core. This patch
adds the compatible for it.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The RISC-V ISA profile RVA23U64 requires extension Zic64b (Cache blocks
must be 64 bytes in size, naturally aligned in the address space).
Some RISC-V platforms do not define the d-cache line size through SYS_CACHE_SHIFT_n.
Set a default value of 64 bytes for such cases.
Signed-off-by: Yu-Chien Peter Lin <peter.lin@sifive.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Update the cpu probing to fallback to "riscv,isa" property if
"riscv,isa-extensions" is not available and modify the riscv CMO code
to use the block size that was probed during cpu setup.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Enhance the existing extension probing mechanism by adding support for
more extensions and probing using the "riscv,isa" property. This patch
is ported from the latest upstream linux.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Split out StarFive VisionFive2 multi-board target specific configuration
into starfive-visionfive2-binman.dtsi in preparation for removal of
jh7110-u-boot and jh7110-common-u-boot in part or whole as sent upstream.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Simon Glass <sjg@chromium.org> says:
This series provides a way to keep track of the images used in bootstd,
including the type of each image.
At present this is sort-of handled by struct bootflow but in quite an
ad-hoc way. The structure has become quite large and is hard to query.
Future work will be able to reduce its size.
Ultimately the 'bootflow info' command may change to also show images as
a list, but that is left for later, as this series is already fairly
long. So for now, just introduce the concept and adjust bootstd to use
it, with a simple command to list the images.
This series includes various alist enhancements, to make use of this new
data structure a little easier.
[trini: Drop patch 18 and 19 for now due to size considerations]
Link: https://lore.kernel.org/r/20241115231926.211999-1-sjg@chromium.org
Add a new 'bootstd images' command, which lists the images which have
been loaded.
Update some existing tests to use it. Provide some documentation about
images in general and this command in particular.
Use a more realistic kernel command-line to make the test easier to
follow.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a file-type parameter to this function and update all users. Add a
proper comment to the function which we are here.
This will allow tracking of the file types loaded by the extlinux
bootmeth.
Signed-off-by: Simon Glass <sjg@chromium.org>
We want to record the type of each file which is loaded. Add an new
parameter for this, to the read_file() method. Update all users.
Make bootmeth_common_read_file() store information about the image that
is read.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The efiload_read_file() does similar things to a common function, so
update it to use that instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Michael ChangandTom Rini
Sébastien SzymanskiandFabio Estevam
Alexander SverdlinandFabio Estevam
Yannic MoogandFabio Estevam
Peng FanandFabio Estevam
Junhui LiuandLeo Yu-Chi Liang
Yu-Chien Peter LinandLeo Yu-Chi Liang
Mayuresh ChitaleandLeo Yu-Chi Liang
E ShattowandLeo Yu-Chi Liang
Simon GlassandTom Rini