Enable fastboot support over USB, using MMC as the backend. This will be
the internal eMMC on devices that have it, or the sdcard slot on devices
with UFS (if available).
We don't use a fixed address for the fastboot buffer because it's
allocated at runtime per-board. Entering fastboot mode should be done by
executing "run fastboot" or manually running:
fastboot -l $fastboot_addr_r usb 0
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250324-sdm845-fixes-fastboot-v1-4-d177a10f336d@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Currently, this platform is failing in CI due to seemingly platform
specific reasons. For now, remove it from CI until the maintainers have
a chance to look in to it.
Signed-off-by: Tom Rini <trini@konsulko.com>
Andre Przywara <andre.przywara@arm.com> says:
C's implicit fallthrough behaviour in switch/case statements can lead to
subtle bugs. Quite some while ago many compilers introduced warnings in
those cases, requiring intentional fallthrough's to be annotated.
So far we were not enabling that compiler option, so many ambiguities
and some bugs in the code went unnoticed.
This series adds the required annotations in code paths that the first
stage of the U-Boot CI covers. There is a large number of cases left
in the libbz2 code. The usage of switch/case is borderline insane there,
labels are hidden in macros, and there are no breaks, but just goto's.
Upstream still uses very similar code, without any annotations. I still
am not 100% sure those are meant to fall through or not, and plan to do
further investigations, but didn't want to hold the rest of the patches
back. You can see for yourself by applying patch 18/18 and building for
sandbox64, for instance.
Because of this we cannot quite enable the warning in the Makefile yet,
but those fixes are worth regardless, and be it to increase readability.
Please note that those patches do not fix anything, really, they just add
those fallthrough annotations, so the series is not really critical.
Link: https://lore.kernel.org/r/20250327153313.2105227-1-andre.przywara@arm.com
The argument parsing in the SPL configuration command uses an implicit
switch/case fallthrough when dealing with a different number of
arguments.
Add our "fallthrough;" statement-like macro before the respective labels
in the bootm code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The argument parsing code in the pmic command uses an implicit switch/case
fallthrough to handle the common part of having one or two arguments.
Add our "fallthrough;" statement-like macro before the second branch in
the parsing code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The raw NAND flash code uses an implicit switch/case fallthrough to
share code when dealing with different ECC modes, and also when handling
some read command.
Add our "fallthrough;" statement-like macro before the respective labels
in the NAND code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
This copies the fallthrough annotations that the original kernel code
gained, before this function got refactored there.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Michael Trimrachi <michael@amarulasolutions.com>
The SPI NOR code uses an implicit switch/case fallthrough when checking
different vendors to determine how to deal with extended addressig modes.
Add our "fallthrough;" statement-like macro before some label in the
4-byte addressing mode code, to avoid a warning when GCC's
-Wimplicit-fallthrough warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The MMC boot mode selection for the TI AM62P series of SoCs uses an
implicit switch/case fallthrough for falling back to some default
boot mode.
Add our "fallthrough;" statement-like macro before the default branch in
the code, to avoid a warning when GCC's -Wimplicit-fallthrough warning
option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The UBI code uses an implicit switch/case fallthrough when handling two
related cases of bad header errors. Also there is a switch/case for unit
prefix handling (G/M/K), which accumulates multiplications.
Add our "fallthrough;" statement-like macro before the respective labels
in both cases, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
The E1000 driver uses an implicit switch/case fallthrough for sharing
some code supporting different PHYs.
Add our "fallthrough;" statement-like macro before the two labels in
e1000_set_phy_type(), to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The generic DM video code uses an implicit switch/case fallthrough to
provide fallback code paths when certain colour depths are not enabled.
Add our "fallthrough;" statement-like macro to the video_fill() function
to avoid a warning when GCC's -Wimplicit-fallthrough warning option is
enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The USB XHCI code uses an implicit switch/case fallthrough to share code
for handling full speed and low speed transfers.
Add our "fallthrough;" statement-like macro before the second label in
the XHCI code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The USB OCHI code uses an implicit switch/case fallthrough after checking
for valid descriptor IDs.
Add our "fallthrough;" statement-like macro before the default branch in
the OHCI code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The Allwinner sun8i EMAC driver uses an implicit switch/case fallthrough
when setting up the MAC/PHY communication protocol, to handle the case
when RMII is requested, but would not be supported by the hardware.
Add our "fallthrough;" statement-like macro before the default branch in
sun8i_emac_set_syscon(), to avoid a warning when GCC's
-Wimplicit-fallthrough warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The fastboot command handling uses an implicit switch/case fallthrough
when receiving the OEM_CONSOLE command, but when this command is not
enabled in Kconfig, to report this command as unknown.
Add our "fallthrough;" statement-like macro before the default branch in
the fastboot code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
In some cases in the generic code, we were already using switch/case
fallthrough annotations comments, though in a way which might not be
understood by most compilers.
Replace two non-standard /* no break */ comments with our fallthrough;
statement-like macro, to make this visible to the compiler.
Also use this macro in place of an /* Fall through */ comment, to be
more consistent.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Even though we seem to catch POWEROFF and EFSCLEAR commands in the THOR
protocol request handling, we ultimately do not seem to handle them
(apart from sending a response), so those commands still print an error
message.
Annotate the switch/case fallthrough in this case, to make this clear to
the compiler.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The inflate state machine in zlib uses switch/case fall-through's
extensively, as it sometimes advances the state, and lets the
conveniently placed next case statement handle the new state already.
The pattern here is:
state->mode = LEN;
case LEN:
Annotate those occasions with the "fallthrough;" macro, to let compilers
know this is fine when using -Wimplicit-fallthrough.
This mimics the upstream commit 76f70abbc73f:
Author: Mark Adler <madler@alumni.caltech.edu>
Date: Sun Mar 27 00:12:38 2022 -0700
Subject: Add fallthrough comments for gcc.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://github.com/madler/zlib/commit/76f70abbc73f
Reviewed-by: Tom Rini <trini@konsulko.com>
Depending on the various MMC boot configurations, we might end up with
trying filesystem mode when a raw image boot failed. This fall-through
in the switch/case statement is explained in a comment, but this is not
visible to the compiler, which still will complain.
Add the proper compiler-visible annotation, to allow enabling the
compiler check in the future.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Neha Malcom Francis <n-francis@ti.com> says:
This short series is an ongoing effort to make RAM utilization clearer for
easier debugging and understanding of code. Intention is for users to quickly
be able to identify the CONFIGs needed to modify for their RAM usecase.
Link: https://lore.kernel.org/r/20250319140327.301266-1-n-francis@ti.com
In the case of a memory allocation error, the ahci_port_start() function
tries to free the `pp' pointer.
This pointer was not dynamically allocated but does in fact point to an
element of the port[] array member of the struct ahci_uc_priv.
Remove the erroneous call to free() to fix this.
Fixes: 4782ac80b0 ("Add AHCI support to u-boot")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jason Jin <jason.jin@freescale.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
The ACPI IORT and ACPI MADT needs to use the same IDs when referencing
GIC ITS. The GIC-v3 ITS driver uses dev_seq(dev) to generate a unique ID
for the MADT, but qemu sbsa-ref hardcodes it.
Currently it's not the same ID, breaking interrupt routing on the OS.
Don't assume it's 0 and fetch it from the device instead.
TEST: Fixes non working IRQs in QEMU sbsa-ref.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
If tiny printf is used with 0x%08X (upper case X) the output is
always 0x00000000. It could be confusing if upper case instead
of lower case is used intentionally or accidentally because the
actual value is not output. To avoid this confusion, treat output
of %X as %x. As a compromise for tiny printf, the hex value is
then output correctly, but in lower case. This is done to keep it
tiny printf small.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marex@denx.de>
The message "DRAM: 2 GiB (effective 32 GiB)" can be a little confusing,
modify the message s/effective/total to make it more evident.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Now that we do not need nor want people to use virt-make-fs for
filesystem tests, remove the related packages from the installation
list.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we have no users of "virt-make-fs" nor users of "sudo" for
creating disk images update the documentation. We remove packages that
are no longer required (and related text) as well as be firm in our
wording around not using "sudo".
Signed-off-by: Tom Rini <trini@konsulko.com>
The problem with using "virt-make-fs" to make a filesystem image is that
it is extremely slow. Switch to using the fs_helper functions we have
instead from the filesystem tests as these can add files to images and
are significantly faster and still do not require root access.
Signed-off-by: Tom Rini <trini@konsulko.com>
FIXME: Reword more
The problem with using "virt-make-fs" to make a filesystem image is that
it is extremely slow. Switch to using the fs_helper functions we have
instead from the filesystem tests as these can add files to images and
are significantly faster and still do not require root access.
The main change here is that our mount point directory has changed from
"test_efi_capsule" to "scratch" and so we need to update other functions
too. As the disk image that we get created doesn't have a GPT, invoke
sgdisk to do a conversion first.
Signed-off-by: Tom Rini <trini@konsulko.com>
The problem with using "virt-make-fs" to make a filesystem image is that
it is extremely slow. Switch to using the fs_helper functions we have
instead from the filesystem tests as these can add files to images and
are significantly faster and still do not require root access.
As this test already had a number of internal functions, add a
prepare_image function to do this part of the test.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Varadarajan NarayananandCaleb Connolly
Rui Miguel SilvaandCaleb Connolly
Sam DayandCaleb Connolly
Alexey MinnekhanovandCaleb Connolly
Tom Rini
Andre PrzywaraandTom Rini
Vincent StehléandTom Rini
Patrick RudolphandTom Rini
Christoph NiedermaierandTom Rini
Heinrich SchuchardtandTom Rini
Neha Malcom FrancisandTom Rini