R5 being a 32-bit processor can't understand the 64-bit mapping being
done in ospi node. Override the ospi node for 32-bit register ranges and
the fss node ( the parent node of ospi ) to map the ranges for the
updated child node correctly.
Reviewed-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
On DTR capable flashes like Micron Xcella the writes cannot start or end
at an odd address in DTR mode. Extra 0xff bytes need to be prepended or
appended respectively to make sure both the start and end addresses are
even.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Jonathan Humphreys <j-humphreys@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/20956
- Support different RAM sizes on imx8m phycoce boards.
- Support new toradex variants.
- Support Samsung 4GB DDR and Realtek RTL8211E PHY on imx8mm-cl-iot-gate.
- Convert imx8mm-phycore and imx8mp-phycore boards to use OF_UPSTREAM.
Newer versions of the imx8mm-cl-iot-gate boards may come populated with a
Samsung 4GB DDR model.
Add support for it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
make it possible to set the RAM timing frequency statically independent
from the RAM size. Fixed RAM timing frequency can be used while the
RAM size is still determined by the EEPROM image.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
We might not be able to always rely on the EEPROM introspection data.
So add a config option alternative which configures the RAM size
to a fix value.
We still try to read the EEPROM introspection data at this point.
So we can print the SoM information if available.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Add support for different RAM sizes and speed grades on the
phyCORE-i.MX8MP.
Add support for 1GB 1.5GHz, 1GB 2GHz, 4GB 1.5GHz,
4GB 2GHz and 8GB 2GHz RAM.
The RAM size and speed grade is detected by the information
stored in the EEPROM on the SoM.
Co-developed-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Co-developed-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Co-developed-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
The PHYCORE_IMX8MP is used by the phyBOARD-Pollux. Migrate board to
OF_UPSTREAM. Linux kernel device tree for the board can be used as is,
corresponding U-Boot device tree files are removed. U-Boot tweaks are
kept unchanged.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Teresa Remmet <t.remmet@phytec.de>
The PHYCORE_IMX8MM is used by the phyBOARD-Polis and the
phyGATE-Tauri-L. Migrate both boards to OF_UPSTREAM. Linux kernel device
trees for both boards can be used as is, corresponding U-Boot device
tree files are removed. U-Boot tweaks are kept unchanged.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Teresa Remmet <t.remmet@phytec.de>
Add support for MT53E512M32D1ZW-046 IT:C memory.
This 4 GB memory has 17 row bits instead of 16 and requires 380 ns of
tRFC (tRFCab) instead of 280 ns due to increased channel density to 16 Gb.
Both modifications are retro-compatible with previous memories.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Remove R8A779H0 V4M DTs which are now replaced by OF_UPSTREAM counterparts.
No functional change expected.
This patch finalizes OF_UPSTREAM conversion of R8A779H0 V4M which DTs landed
in Linux 6.9 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Enable OF_UPSTREAM to use upstream DT and add renesas/ prefix to the
DEFAULT_DEVICE_TREE. And thereby directly build DTB from dts/upstream/src/
including *-u-boot.dtsi files from arch/$(ARCH)/dts/ directory.
This patch finalizes OF_UPSTREAM conversion of R8A779H0 V4M which DTs
landed in Linux 6.9 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Sughosh Ganu <sughosh.ganu@linaro.org> says:
The following patch series adds support for version 2 of the FWU
metadata. The version 2 metadata structure is defined in the latest
revision of the FWU specification [1].
The earlier versions of these patches were migrating to a version 2
only support in U-Boot, similar to TF-A. However, based on feedback
from ST [2], this series has been updated to support both versions. A
platform would still be needed to enable one of the two versions of
metadata through a config symbol.
TF-A has code which reads the FWU metadata and boots the platform from
the active partition. TF-A has decided to migrate the FWU code to a
version 2 only support. These changes have been merged in upstream
TF-A.
These changes have been tested on the ST DK2 board, which uses the GPT
based partitioning scheme. Both V1 and V2 metadata versions have been
tested on the DK2 board.
These changes need to be tested on platforms with MTD partitioned
storage devices.
Now that support for FWU metadata version 2 has been added, the
feature can be enabled on platforms which had enabled it. A new config
symbol for selecting the metadata version for the platform is also
being added.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The FWU Update Agent in U-Boot supports both versions of the FWU
metadata. Make changes in the documentation to reflect this.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Make changes to the FWU metadata access tests corresponding to the
changes in the FWU metadata access code.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The version 2 of the FWU metadata allows for appending opaque vendor
specific data to the metadata structure. Add support for appending
this data to the metadata. The vendor specific data needs to be
provided through a file, passed through a command-line parameter. Make
corresponding changes to the tool's manpage.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Add support for generating the FWU metadata version 2. The tool now
requires the version to be provided as a command-line option. Make
corresponding changes to the tool's manpage.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Add support for displaying data specific to FWU metadata version
2. Because the size of the v2 metadata structure is read from the
structure itself, allocate memory for the metadata structure by first
getting the size of the structure.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Make changes to the functions used for generating the DFU's alt
variable so that the FWU image information is obtained from the common
version agnostic structure instead of reading the metadata.
While here, also update the name of the field used for storing the
image GUID in the FWU metadata.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Information about FWU images on MTD partitions is now stored with the
corresponding driver instead of a global variable. Get this
information from the driver.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The third argument passed to the function gen_image_alt_info() is not
used and is superfluous. Remove this unused argument from the function
call.
Fixes: 4898679e19 (FWU: Add FWU metadata access driver for MTD storage regions)
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Support has been added for version 2 of the FWU metadata
structure. Add config symbols to enable either of the two versions.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Transition the platform to either Trial State or Regular State on a
successful update. Do this by calling the fwu_state_machine_updates()
API function.
For version 1 of the FWU metadata, the transition to Trial State is
done by starting the Trial State counter, while for version 2, in
addition to the counter, the bank_state field of the FWU metadata is
also updated to Valid.
For transitioning the platform to Regular State, no action is needed
with version 1 of the FWU metadata structure, while for version 2, the
bank_state field is set to Accepted.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
With addition of support for version 2 of the FWU metadata structure,
the metadata information is collected into a version agnostic
structure. Make changes to the FWU functions so that the information
that was earlier obtained by reading the metadata structure is now
obtained through this version agnostic structure.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Support is being added in U-Boot for version 2 of the FWU
metadata. Support for this version is to co-exist with version 1
support. To achieve this, a common, version agnostic structure has
been added to keep information provided by the FWU metadata
structure.
Add API's to handle the version specific FWU metadata fields. The
version agnostic structure gets initialized at boot by reading the FWU
metadata. Updates to the FWU metadata result in the API's getting
called to populate the version specific fields of the strucure, before
the metadata gets written to the storage media.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The FWU specification now has two versions of the FWU metadata
structure, and both are to be supported. Introduce a version agnostic
structure for storing information about the FWU updatable images. This
allows for a split of common version agnostic FWU code and version
specific code.
The version specific code is then responsible for arranging the data
as per the corresponding metadata structure before it gets written to
the metadata partitions.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Add support for version 2 of the FWU metadata structure. The top level
structure is kept separate through a config symbol. Most of the
fields, primarily used for providing information on updatable images
are common across the two versions.
Also change a few existing structure members used for image
identification to reflect the fact that these are GUIDs, and not
UUIDs.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The FWU metadata access driver for MTD partitioned devices currently
uses a statically allocated array for storing the updatable image
information. This array depends on the number of banks and images per
bank. With migration of the FWU metadata to version 2, these
parameters are now obtained at runtime from the metadata.
Make changes to the FWU metadata access driver for MTD devices to
allocate memory for the image information dynamically in the driver's
probe function, after having obtained the number of banks and images
per bank by reading the metadata. Move the image information as part
of the driver's private structure, instead of using a global variable.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
In version 2 of the metadata structure, the size of the structure
cannot be determined statically at build time. The structure is now
broken into the top level structure which contains a field indicating
the total size of the structure.
Add a size parameter to the metadata access API functions to indicate
the number of bytes to be accessed. This is then used to either read
the entire structure, or only the top level structure.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The fwrite call returns the number of bytes transferred as part of the
write only when the size parameter is 1. Pass the size parameter to
the library call as 1 so that the correct number of bytes transferred
are returned.
Fixes: fdd56bfd3a ("tools: Add mkfwumdata tool for FWU metadata image")
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Support is to be added in the following commits for the FWU metadata
version 2. Disable the FWU feature on platforms that enable it for the
V2 addition work.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/20834
- Allow signing i.MX8M flash.bin via binman, which is a much more
elegant solution that using scripts.
- Improve i.MX8M HAB documentation.
- Increase PHY auto-negotiation timeout to 20s on MX8Menlo
- Add bmode support for the MX53 Menlo board.
- Update Update iMX8MM Menlo board configuration
For CST to find the certificates and keys for signing, some keys and
certs need to be copied into the u-boot build directory.
Signed-off-by: Claudius Heine <ch@denx.de>
By removing the "boot" directory in the "m53menlo/boot/fitImage" path,
we simplify the TFTP server directory layout a bit. This also requires a
change to the mmcload command as it (mis-)uses the same variable as the
TFTP boot.
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Marek Vasut <marex@denx.de>
The board can do primary/secondary boot switching, enable the bmode command.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Synchronize Toradex Verdin iMX8MM based MX8Menlo board configuration
with Toradex Verdin iMX8MM and enable convenience commands like cat,
hexdump, xxd.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The ethernet PHY on MX8Menlo board takes a while to come out of
reset, increase the auto-negotiation timeout to prevent it from
timing out in case the ethernet is used right after the board was
reset.
Signed-off-by: Marek Vasut <marex@denx.de>
Update documentation and use nxp_imx8mcst binman etype for signing
of flash.bin instead of previous horrible shell scripting.
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Marek Vasut <marex@denx.de>
In case CONFIG_IMX_HAB is enabled, extend the binman image description for
all of i.MX8M{Q,M,N,P} with CST wrapper node. This way, if CONFIG_IMX_HAB
is enabled, binman will be automatically used to sign SPL and fitImage.
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Manorit ChawdhryandTom Rini
Pratyush YadavandTom Rini
Fabio EstevamandFabio Estevam
Benjamin HahnandFabio Estevam
Teresa RemmetandFabio Estevam
Yannic MoogandFabio Estevam
Emanuele GhidoliandFabio Estevam
Marek Vasut
Sughosh GanuandTom Rini
Claudius HeineandFabio Estevam
Olaf MandelandFabio Estevam
Marek VasutandFabio Estevam