Use the lmb_read_check() function to verify if it is safe to use a
region of memory to load data from the wget command. The current logic
checks the amount of free memory available, starting from the 'load
address'. This call fails if the same region of memory has been used
earlier. This used to work earlier as the LMB memory map had a local
scope and was not persistent. Fix this issue by using the
lmb_read_check() call instead which only returns an error in case the
memory region has been marked for not allowing re-use.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Use the lmb_read_check() function to verify if it is safe to use a
region of memory to load data from a tftp command. The current logic
checks the amount of free memory available, starting from the 'load
address'. This call fails if the same region of memory has been used
earlier. This used to work earlier as the LMB memory map had a local
scope and was not persistent. Fix this issue by using the
lmb_read_check() call instead which only returns an error in case the
memory region has been marked for not allowing re-use.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
The OSD command calls functions from video_osd-uclass.o ,
which is built only when CONFIG_OSD is enabled. Add the
missing dependency into Kconfig.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The mmc erase command currently requires blk# and cnt parameters
which can be obtained using the part start and part size commands
if the entire partition needs to be erased.
Simplify the use of the mmc erase command by allowing the partition
name to be specified directly.
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
The mmc speed command configuration option keeps showing up in
Kconfig directly in 'Command line interface'. Move MMC_SPEED_MODE_SET
under CMD_MMC to make it show up alongside the MMC command.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
If CONFIG_SYS_MEM_TOP_HIDE is defined, gd->ram_size is reduced by
CONFIG_SYS_MEM_TOP_HIDE. Need to correct the actual ram size in
dram_init_banksize.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Aspeed AST27xx SoCs integrate the CPTRA 1.0 secure IP, which
export a SHA accelerator interface for SoC to use.
Note that CPTRA 1.0 supports only SHA384 and SHA512 and this
patch is verified by the 'hash test sha384/sha512' commands.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
We shouldn't have had the link to our git tree be contained within "``"
as that meant that it did not work as a link, so remove those. And
rather than make this a link plus text, keep this as a link within the
text for overall clarity.
Suggested-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Francis Laniel <francis.laniel@amarulasolutions.com> says:
Hi!
With this series, I bumped the new hush to get the latest commits from upstream.
Also, I added back a reverted commit which goal was to fix a bad behavior in
old hush test.
I had to tweak a bit this commit, but everything worked both locally and in the
CI.
This commit adds the following hush busybox upstream commits:
23da5c4b716b ("hush: do not exit interactive shell on some redirection errors")
14e28c18ca1a ("hush: fix "exec 3>FILE" aborting if 3 is exactly the next free fd")
6c38d0e9da2d ("hush: avoid duplicate fcntl(F_SETFD, FD_CLOEXEC) during init")
758b21402abc ("hush: detect when terminating "done"/"fi" is missing")
2639f3bc72ac ("hush: set G.ifs sooner (prevents segfault)")
Adding specific ifdef and endif guard was needed for 2639f3bc72ac.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
The dollar test was merged with bugous console behavior, and
instead of fixing it, this behavior was just workarounded.
This was done to keep compatibility with the existing behavior.
It seems like without the fix the ut_assert_skipline(); didn't clear
console and running ut_assert_skipline(); many times would give always
OK. With e58bafc35f ("lib: membuff: fix readline not returning line in case of overflow")
the line is cleared correctly and next assert fails because now there
is nothing to clean which is correct if we look the this a bit above
the failing assert:
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/*
* For some strange reasons, the console is not empty after
* running above command.
* So, we reset it to not have side effects for other tests.
*/
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
Which further confirms that tests workaround the old problem and now
that problem is fixed we can remove the whole if blocks and simply
place ut_assert_console_end() right after ut_assert_skipline() without
any conditional and will pass green.
So this part of code goes from:
ut_assert_skipline();
ut_assert_skipline();
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/* See above comments. */
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
to become:
ut_assert_skipline();
if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_skipline();
}
ut_assert_console_end();
The if block mentioned above that calls console_record_reset_enable() is
completely removed as fixed by e58bafc35f.
[flaniel: adapt second if]
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240105072212.6615-8-clamor95@gmail.com
[mkorpershoek: reworded commit title]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
[flaniel: remove console_record_reset_enable() if]
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Pull request efi-next-20241024
UEFI:
* Use generated UUIDs in UEFI capsules:
- efi: define struct efi_guid
- lib: uuid: add UUID v5 support
- efi: add a helper to generate dynamic UUIDs
- doc: uefi: document dynamic UUID generation
- sandbox: switch to dynamic UUIDs
- lib: uuid: supporting building as part of host tools
- include: export uuid.h
- tools: mkeficapsule: use u-boot UUID library
- tools: mkeficapsule: support generating dynamic GUIDs
- test: lib/uuid: add unit tests for dynamic UUIDs
- test: lib/uuid: add tests for UUID version/variant bits
* Minor code clean-up
- shorten efi_bootmgr_release_uridp_resource()
- rename efi_bootmgr_image_return_notify
- return the correct error in efi_bootmgr_release_uridp()
- Kconfig: clean up the efi configuration status
- Use puts() in cout so that console recording works
- Put back copyright message in helloworld.c
Pull request doc-2024-10-rc4
* doc/develop/sending_patches.rst: Clarify when to use which branch
* doc/arch/m68k.rst: Update toolchain comment
* doc/arch/mips.rst: Update toolchain list
* doc: Update rST to not reference the old wiki
* doc/mkeficapsule.1: Update homepage link
* bootcount: Update to point to current documentation
* binman: Update links for sending patches
When linking to our documentation for submitting patches, we shouldn't
point at the old wiki but instead our current documentation.
Signed-off-by: Tom Rini <trini@konsulko.com>
The current documentation for the bootcount API is on our website and
not the old wiki, update the link in two places.
Signed-off-by: Tom Rini <trini@konsulko.com>
In two places we had references to the old wiki pages instead of links
to the relevant part of our documentation. Update (and slightly reword)
these spots.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove both the ELDK and emdebian links as they are broken, and add a
link to the kernel.org toolchains which we use in CI.
Signed-off-by: Tom Rini <trini@konsulko.com>
The previous wording on the paragraph about what branch to use when
submitting patches did not reflect how / when the next branch is
currently used. Reword this to note that master should be used for bug
and regression fixes, always, and that next should be used once it
opens, with -rc2.
Reported-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
At present EFI output to the console uses fputs() which bypasses the
console-recording feature. This makes it impossible for tests to check
the output of an EFI app.
There doesn't seem to be any need to do this bypass, so adjust it to
simply use the puts() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Add some basic unit tests to validate that the UUID generation behaves
as expected. This matches the implementation in efi_loader for sandbox
and a Qualcomm board and should catch any regressions.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add support for generating GUIDs that match those generated internally
by U-Boot for capsule update fw_images when using dynamic UUIDs.
Dynamic UUIDs in U-Boot work by taking a namespace UUID and hashing it
with the board compatible and fw_image name. This feature just provides
a way to determine the UUIDs for a particular board without having to
actually boot U-Boot on it.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Replace the use of libuuid with U-Boot's own UUID library. This prepares
us to add support for generating v5 GUIDs.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Adjust the UUID library code so that it can be compiled as part of a
host tool.
This removes the one redundant log_debug() call, as well as the
incorrectly defined LOG_CATEGORY.
In general this is a fairly trivial change, just adjusting includes and
disabling list_guid.
This will be used by a new genguid tool to generate v5 GUIDs that match
those generated by U-Boot at runtime.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Migrate sandbox over to generating it's capsule update image GUIDs
dynamically from the namespace and board/image info. Update the
reference and tests to use the new GUIDs.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Document how platforms can generate GUIDs at runtime rather than
maintaining a list of UUIDs per-board.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Introduce a new helper efi_capsule_update_info_gen_ids() which populates
the capsule update fw images image_type_id field. This allows for
determinstic UUIDs to be used that can scale to a large number of
different boards and board variants without the need to maintain a big
list.
We call this from efi_fill_image_desc_array() to populate the UUIDs
lazily on-demand.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add support for generating version 5 UUIDs, these are determistic and work
by hashing a "namespace" UUID together with some unique data. One intended
usecase is to allow for dynamically generate payload UUIDs for UEFI
capsule updates, so that supported boards can have their own UUIDs
without needing to hardcode them.
In addition, move the common bit twiddling code from gen_ran_uuid into a
separate function and rewrite it not to use clrsetbits (which is not
available when building as part of host tools).
Tests for this are added in an upcoming patch.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The EFI_LOADER and EFI config options are randomly scattered under lib/
making it cumbersome to navigate and enable options, unless you really
know what you are doing. On top of that the existing options are in
random order instead of a logical one.
So let's move things around a bit and move them under boot/. Present a
generic UEFI entry where people can select Capsules, Protocols,
Services, and an option to compile U-Boot as an EFI for X86
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
There's currently a chance for this function to overwrite an error if
one occurred and the subsequent call to
efi_uninstall_multiple_protocol_interfaces() succedded. Although this
is an EFI event and we can't do much let's at least set and return
the correct error
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
We use this event when returning from an EFI HTTP booted image.
The name is a bit confusing since it suggests we always run it,
rename it to make it clearer
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
We use this function to clean up leftover resources when booting an
EFI HTTP boot image, but the name is unnecessary long.
Shorten it to efi_bootmgr_release_uridp()
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
CI result shows no issue:
https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/22315
----------------------------------------------------------------
- Aspeed: Add AST2700 board (Ibex RISC-V core) support
- Add timer, dram controller, network support
- Sophgo: Add clock controller support for Milk-V Duo
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22320
- Improve i.MX8M boot time by enabling MMU and D-cache very early.
- Don't drop the enable bit once set on the i.MX PWM driver.
- Enable DM_RNG so that the kaslr-seed property is set in the dt
allowing Linux KASLR.
Changing the duty-cycle should not blindly override (and clear) the
enable (EN) bit if it has already been set. For instance, a PWM
backlight can be enabled and set to a specific intensity using two
operations. The order of these operations should not matter.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Enable DM_RNG so that the kaslr-seed property is set in the dt allowing
Linux KASLR.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Enable MMU and caches very early on in the boot process on i.MX8M
in U-Boot proper. This allows board_init_f to run with icache and
dcache enabled, which saves some 700 milliseconds of boot time on
i.MX8M Plus based device.
The 'bootstage report' output is below:
Before:
```
Timer summary in microseconds (8 records):
Mark Elapsed Stage
0 0 reset
961,363 961,363 board_init_f
1,818,874 857,511 board_init_r
1,921,474 102,600 eth_common_init
2,013,702 92,228 eth_initialize
2,015,238 1,536 main_loop
Accumulated time:
32,775 dm_r
289,165 dm_f
```
After:
```
Timer summary in microseconds (8 records):
Mark Elapsed Stage
0 0 reset
989,466 989,466 board_init_f
1,179,100 189,634 board_init_r
1,281,456 102,356 eth_common_init
1,373,857 92,401 eth_initialize
1,375,396 1,539 main_loop
Accumulated time:
12,630 dm_f
32,635 dm_r
```
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Add driver for AST2700 to initialize DRAM in SPL.
This patch also refactors the Kconfig dependency of
Aspeed DRAM drivers as some of them are shared among
the file structures of RV and ARM ISAs.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Define and parse the header of the First Mutable Code (FMC)
of AST2700 SoCs at runtime phase.
The FMC header contains the information to load prebuilt binaries
required for device initialization such as DRAM and VGA.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
