Drop setting an explicit value for SYS_MALLOC_F_LEN. This increases
the available space to 0x10000.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Drop setting an explicit value for SYS_MALLOC_F_LEN. This increases
the available space to 0x10000.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
For silicon revision A1, the USB instance number for USB1 is 3 and for
USB2 it is 4. This changed for revision B0 where the USB instance number
for USB1 is 0 and for USB2 it is 1, which is the intended instance
number. Select the correct numbering according to the selected SoC
(IMX95) and its revision.
This patch is based on the information provided by:
"AN14750 Migration Guide from i.MX 95 A1 to B0; Rev. 1.0" .
Reviewed-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Fedor Ross <fedor.ross@ifm.com>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Similar to the imx95, use the nxp-imx9image etype for the binman node to
facilitate further modifications.
Signed-off-by: Jérémie Dautheribes (Schneider Electric) <jeremie.dautheribes@bootlin.com>
No functional changes, only cosmetic adjustments to prepare for the next
commit.
Signed-off-by: Jérémie Dautheribes (Schneider Electric) <jeremie.dautheribes@bootlin.com>
Andrew Goodbody <andrew.goodbody@linaro.org> says:
Smatch reported an error where a value calculated by ERR_PTR was not
used. Fixing this to return the generated value led to a test failure
which meant updating the sandbox clock code so that it would still cause
the tests to pass with the above correction.
Debugging this problem led to a SIGSEGV which is addressed in 1/3.
Possible memory leaks noticed are addressed in 3/3.
Link: https://lore.kernel.org/r/20251121-clk_uclass_fix-v2-0-74f4ea10e194@linaro.org
In clk_set_default_rates() memory is allocated to store the clock rates
that are read. Direct returns fail to free this memory leading to a
memory leak so instead use 'goto fail;' which will then perform the free
before exiting the function.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In clk_set_default_get_by_id ret is passed to ERR_PTR but nothing is
done with the value that this calculates which is obviously not the
intention of the code. This is confirmed by the code around where this
function is called.
Instead return the value from ERR_PTR.
Then fixup the sandbox code so that the test dm_test_clk does not fail
as it relied on the broken behaviour.
Finally disable part of the test that does not work correctly with
CLK_AUTO_ID
This issue found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
If LOG_DEBUG is defined and a NULL clk is passed to clk_enable or
clk_disable then an attempt is made to dereference NULL in the debug
statement. Guard against this.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
The macro U_BOOT_DEVICE has been renamed to U_BOOT_DRVINFO.
This patch updates the reference in reboot-mode-gpio.h.
Signed-off-by: Cibil Pankiras <cibil.pankiras@egym.com>
If noffset is negative, do not pass it to fit_get_name() and then further to
libfdt, this will crash sandbox with SIGSEGV because libfdt can not handle
negative node offsets without full tree check, which U-Boot inhibits to keep
size lower.
Instead, always check noffset before use, and if the return value indicates
failure, exit right away.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The DA8xx GPIO driver was not being built as part of the A53 U-Boot
image on AM64x and AM65x. This meant only i2c GPIO expanders were
accessible to the users from the U-Boot prompt.
This patch fixes it by setting CONFIG_DA8XX_GPIO.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Otherwise the custom-cape eeprom (at address 57) reports NACK which
results into "i2c_write: error waiting for data ACK (status=0x116)" and
terminates further scanning.
Signed-off-by: Marian Cingel <cingel.marian@gmail.com>
Commit 5f70be08b0 ("Fix autoboot countdown printing wrong") introduces
inconsistency in how the countdown is displayed. For example, in case
when BOOTDELAY=5, the next output is observed during the boot:
Hit any key to stop autoboot: 5
Hit any key to stop autoboot: 4
Hit any key to stop autoboot: 3
That happens due to different printf format (%2d vs %1d). Moreover, the
mentioned commit fails to handle the case when the user is holding some
key before the countdown is shown. E.g. if BOOTDELAY=101, the next
malformed output is being produced:
Hit any key to stop autoboot: 1 0
That's because the fast path code wasn't modified accordingly, and still
tries to erase the number using '\b\b\b' format.
Fix both issues by introducing a dedicated routine for printing the
whole countdown line.
Fixes: 5f70be08b0 ("Fix autoboot countdown printing wrong")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: David Zang <davidzangcs@gmail.com>
lthreads is of size MAX_THREADS, hence id must be lower than
MAX_THREADS to avoid any potential buffer overflow in
thread_start function.
Signed-off-by: Francois Berder <fberder@outlook.fr>
Attempting to build with "allyesconfig" means that we try and build all
available options for the sandbox platforms. Doing so exposes that the
drivers under drivers/clk/ti/ can only be compiled or linked on
ARCH_OMAP2PLUS platforms as some drivers require platform specific
headers while other drivers depend on these first drivers to link.
Express those requirements in Kconfig as well.
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
The ALTERA_QSPI driver conflicts with the regular FLASH_CFI_DRIVER as
both implement the same high level functionality and so use the same
global namespace. In a similar fashion, all NAND drivers are mutually
exclusive due to namespace collisions. For the remaining drivers which
did not already have some architecture specific dependency, add them.
Signed-off-by: Tom Rini <trini@konsulko.com>
Quentin Schulz <quentin.schulz@cherry.de> says:
Only the Siemens corvus board seems to be using these two status LEDs
from the legacy LED API.
Since we're trying to get rid of the last users of the legacy LED API,
let's migrate Corvus to the modern LED API instead, which uses DM. For
Corvus's case, it also uses DM_GPIO (already enabled in defconfig).
Since there was no use for the green status_led (not compiled in), it
simply is removed without migrating it to the modern API. If need be, we
can always add a new gpio-led in the FDT.
Note that I do not own a Siemens Corvus board so it's a bit of a shot in
the dark whether it'll work on the first try, only build tested.
The red LED should be on whenever reaching U-Boot proper CLI, if not we
have an issue.
The LED should be controllable with the led command from U-Boot proper
CLI.
Link: https://lore.kernel.org/r/20251119-corvus-led-red-green-v1-0-ce86b8d59dfc@cherry.de
To the exception of red_led_on in the arm-specific assembly code, all
code interacting with the red status LED was guarded by the
CONFIG_LED_STATUS_RED symbol, which is enabled in none of the upstream
defconfigs.
Since the last board which overrode the weak red_led_on function got
migrated to the new LED mechanism, there's also no user of the
arm-specific assembly code anymore, therefore it can be removed along
the other unreachable code sections.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
red_led_on is either called from the legacy LED shell command (which is
disabled for corvus) or from arm-specific assembly code right before
jumping into board_init_r() in U-Boot proper.
Let's migrate to use the more modern LED subsystem by migrating to DM.
The default-state is set to on to mimic red_led_on() from the
arm-specific assembly code as a missing default-state FDT property
currently means the LED is not probed except if explicitly done via the
led shell command. Note though that this is running much later in the
boot process, once DM is started.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
The last user of it was removed in a previous commit so let's remove its
support entirely.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
green_led_on and green_led_off are only called by the legacy LED command
(CONFIG_LED_STATUS_CMD) when CONFIG_LED_STATUS_GREEN is enabled, both of
which aren't enabled for corvus, so let's simply remove it as it's dead
code.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
No PPC upstream defconfig actually enables CONFIG_LED_STATUS and we're
trying to get rid of the legacy LED API, so let's remove one of its last
users.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
The code is guarded by a condition none of the defconfigs meet (that is
CONFIG_SYS_FAULT_ECHO_LINK_DOWN and CONFIG_LED_STATUS_RED both enabled),
so we can remove the unreachable code sections.
When doing that, there's no caller for miiphy_link anymore, so it can be
removed.
This in turns makes CONFIG_SYS_FAULT_ECHO_LINK_DOWN and
CONFIG_SYS_FAULT_MII_ADDR unused so they are removed as well.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Commit 76386d6195 ("arm: Remove cm_t35 board") removed support for the
board that was built when TARGET_CM_T35 is selected, but removal of the
symbol was forgotten, so let's fix this oversight.
While at it, update the README for omap3 to remove the last mention of
cm_t35.
Fixes: 76386d6195 ("arm: Remove cm_t35 board")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
The last user of coloured_LED_init has been recently removed, so we can
remove all places it's called and defined as it does nothing now.
Nobody makes use of the yellow and blue status LEDs from the legacy API,
so let's remove all references to it.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
The last CONFIG_MVS in code was removed almost 12 years ago in commit
3b98b57fa7 ("include: delete unused header files").
STATUS_LED_PAR was last seen 8 years ago when removed in commit
5b8e76c35e ("powerpc, 8xx: remove support for 8xx").
If CONFIG_LED_STATUS_BOARD_SPECIFIC is not defined, the build will fail
so we won't even reach this part of the code.
Let's simplify the if block to actually possible configurations.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
Many C unit tests are not executed if CONFIG_CONSOLE_RECORD is not set.
Hence Tom suggested to let UNIT_TEST imply CONSOLE_RECORD.
The first patch makes the skipped C unit tests visible.
The rest of the series deals with hidden bugs in our tests.
The 'fdt get value' command returned incorrect values on low-endian
systems. So this needed fixing too.
Link: https://lore.kernel.org/r/20251123225711.227016-1-heinrich.schuchardt@canonical.com
The cmd and the log test suites rely on CONFIG_CONSOLE_RECORD.
The log test suite is always built if CONFIG_UNIT_TEST=y.
The print_do_hex_dump test relies on CONFIG_HEXDUMP. Imply it too.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The 32bit cells of a device-tree property are big-endian. When printing
them via 0x08x we must first convert to the host endianness.
Remove the restriction to 20 bytes length. This would not allow to read an
SHA256 value.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
On the power architecture the bdinfo command prints architecture specific
information. The test needs to accept these output lines.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The original value of the first variable msr (0x200) is not controlled by
U-Boot. Don't make any assumption.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Hexdumps for types other then byte look different in dependence of the
endianness.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
If CONFIG_CONSOLE_RECORD_INIT_F=y we need additional memory according to
CONFIG_CONSOLE_RECORD_OUT_SIZE_F. Similarly CONFIG_SYS_MALLOC_LEN must be
increased by CONSOLE_RECORD_OUT_SIZE.
Go with the default values for CONFIG_CONSOLE_RECORD_INIT_F and
CONFIG_SYS_MALLOC_LEN.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The font test makes assumptions about video devices and selected fonts that
may not hold true on other configurations like qemu-x86_64_defconfig.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
If CONFIG_CONSOLE_RECORD_INIT_F=y we need additional memory according to
CONFIG_CONSOLE_RECORD_OUT_SIZE_F.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
256 GiB is the default memory size of the sandbox. But in our CI other
boards like qemu-x86_64_defconfig run with a different memory size.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Skipping to the line starting with tsc reaches the tsc_base output not the
final tsc output.
Expect all the X86 specific lines in the bdinfo output.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
On ARM the bdinfo command prints architecture specific information.
The test needs to accept these output lines.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
