Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Marek Vasut <marek.vasut@mailbox.org>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Łukasz Majewski <lukma@nabladev.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Łukasz Majewski <lukma@nabladev.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Łukasz Majewski <lukma@nabladev.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Łukasz Majewski <lukma@nabladev.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-By: Tim Harvey <tharvey@gateworks.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
This board is just short of overflowing the size limit, disable
support for EFI partition since EFI support is already disabled,
and disable a couple of commands which are also likely unused to
keep the board below limit.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Soeren Moch <smoch@web.de>
OP-TEE requires a trusted RNG. This is provided by ELE on i.MX95. Start
the initialization of the ELE RNG context before OP-TEE startup to allow
OP-TEE to derive RNG later.
Signed-off-by: Ji Luo <ji.luo@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
This adds support for the Kontron Electronics OSM-S i.MX93 SoM
and the matching baseboard BL i.MX93.
The SoM hardware complies to the Open Standard Module (OSM) 1.1
specification, size S (https://sget.org/standards/osm).
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
The arch-level implementation should be used here so that
env_get_location() can be used on board-level.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
This adds support for the Kontron Electronics OSM-S i.MX8MP SoM
and the matching baseboard BL i.MX8MP.
The SoM hardware complies to the Open Standard Module (OSM) 1.1
specification, size S (https://sget.org/standards/osm).
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Since M2 and M2B share the same defconfig aside from one parameter, we
have a common configuration that also allows us to support addition of
new boards based on the M2 hardware.
Signed-off-by: Andrea Calabrese <andrea.calabrese@amarulasolutions.com>
Michael Walle <mwalle@kernel.org> says:
I'll soon post support for the Kontron SMARC-sAM67 u-boot support.
I'm still waiting for the linux device trees to be merged (in -next
right now) and then to be synced to the u-boot tree. That board
features two different RTCs and this will already support for these.
Link: https://lore.kernel.org/r/20251117103315.2212686-1-mwalle@kernel.org
Add support for the Microcrystal RV8263 and compatible RTCs. The
driver's name was taken from linux. It should work with any NXP PCF85063
compatible RTCs. It was tested with a RV8263.
Signed-off-by: Michael Walle <mwalle@kernel.org>
As u-boot doesn't have any loadable modules, tristate doesn't make
sense. Convert it to bool.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This merges a number of fixes from Marek Vasut that will allow us to
move to a newer dtc release (that enforces the 8 byte alignment
requirement that has long existed).
Make sure the correct PLATFORM_...FLAGS are assigned in each
case, consistently. Assign PLATFORM_ELFFLAGS for both LE and
BE case. The previous PLATFORM_CPPFLAGS makes no sense for
these particular parameters, which are passed to objcopy.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Make sure the end of U-Boot is at 8-byte aligned offset, not 4-byte
aligned offset. This allows safely appending DT at the end of U-Boot
with the guarantee that the DT will be at 8-byte aligned offset. This
8-byte alignment is now checked by newer libfdt 1.7.2 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The 'extension' test would set 'extension_overlay_addr' variable to
decimal 4096 due to conversion in python. The 'extension_overlay_addr'
is however sampled using env_get_hex("extension_overlay_addr", 0);
which converts the 4096 to 0x4096 and uses that as DT overlay address,
which is unaligned. Fix this by setting extension_overlay_addr to 0x1000
as intended, which is aligned.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Trivially fix the following warnings in sandbox DTs, which show up with
DTC 1.7.2. Assign pin groups less confusing node names with pins- prefix
to avoid confusing DT compiler into thinking the node is really a bus node:
"
arch/sandbox/dts/.test.dtb.pre.tmp:1831.20-1841.5: Warning (i2c_bus_bridge): /pinctrl/i2c: incorrect #address-cells for I2C bus
arch/sandbox/dts/.test.dtb.pre.tmp:1831.20-1841.5: Warning (i2c_bus_bridge): /pinctrl/i2c: incorrect #size-cells for I2C bus
arch/sandbox/dts/test.dtb: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge'
arch/sandbox/dts/.test.dtb.pre.tmp:1848.20-1856.5: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus
arch/sandbox/dts/.test.dtb.pre.tmp:1848.20-1856.5: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus
arch/sandbox/dts/test.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
"
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Trivially fix the following warnings in sandbox DTs, which show up with
DTC 1.7.2. Fill in the missing address and adjust emulated I2C address
to fit the 7bit address limit:
"
arch/sandbox/dts/sandbox.dtsi:138.30-140.5: Warning (i2c_bus_reg): /i2c@0/sandbox_pmic: I2C bus unit address format error, expected "40"
arch/sandbox/dts/sandbox.dtsi:146.18-161.5: Warning (i2c_bus_reg): /i2c@0/emul: I2C bus unit address format error, expected "ff"
arch/sandbox/dts/sandbox.dtsi:148.4-17: Warning (i2c_bus_reg): /i2c@0/emul:reg: I2C address must be less than 7-bits, got "0xff". Set I2C_TEN_BIT_ADDRESS for 10 bit addresses or fix the property
"
"
arch/sandbox/dts/.test.dtb.pre.tmp:912.18-926.5: Warning (i2c_bus_reg): /i2c@0/emul: I2C bus unit address format error, expected "ff"
arch/sandbox/dts/.test.dtb.pre.tmp:913.4-17: Warning (i2c_bus_reg): /i2c@0/emul:reg: I2C address must be less than 7-bits, got "0xff". Set I2C_TEN_BIT_ADDRESS for 10 bit addresses or fix the property
arch/sandbox/dts/.test.dtb.pre.tmp:928.30-931.5: Warning (i2c_bus_reg): /i2c@0/sandbox_pmic: I2C bus unit address format error, expected "40"
"
Fix up pmic test to match.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Make sure the end of U-Boot is at 8-byte aligned offset, not 4-byte
aligned offset. This allows safely appending DT at the end of U-Boot
with the guarantee that the DT will be at 8-byte aligned offset. This
8-byte alignment is now checked by newer libfdt 1.7.2 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The fdt_high and initrd_high have nasty side-effects , which may lead
to DT placed at 4-byte aligned offset when used in place, which then
prevents Linux on arm64 from booting. This is difficult to debug and
inobvious, with little to no gain. Remove this to let U-Boot place the
DT at correctly aligned address.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
The fitImage may contain FDT at 4-byte aligned address, because alignment
of DT tags is 4 bytes. However, libfdt and also Linux expects DT to be at
8-byte aligned address. Make sure that the DTs embedded in fitImages are
always used from 8-byte aligned addresses. In case the DT is decompressed,
make sure the target buffer is 8-byte aligned. In case the DT is only
loaded, make sure the target buffer is 8-byte aligned too.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tom RiniandFabio Estevam
Marek VasutandFabio Estevam
Ji LuoandFabio Estevam
Frieder SchrempfandFabio Estevam
Andrea CalabreseandFabio Estevam
Michael WalleandTom Rini