Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Swamil Jain <s-jain1@ti.com> says:
This patch series introduces splashscreen support for
AM62x platforms by adding configuration fragments and implementing
selective splashscreen enablement across different boot configurations.
The series adds two configuration fragments: am62x_a53_splashscreen.config
and am62x_evm_prune_splashscreen.config. These fragments allow platforms
to selectively enable or disable splashscreen functionality based on
their specific requirements. The prune fragment is particularly useful
for platforms like AM62P where splashscreen must be disabled when using
TI-DM firmware with display sharing features.
The series enables splashscreen on AM62X.
Link: https://lore.kernel.org/r/20260519141716.1346635-1-s-jain1@ti.com
Enable A53 splashscreen at u-boot SPL stage. SPL_MAX_SIZE is bumped up
to 0x80000 to accommodate splash related code. Include
splashscreen.config to enable splashscreen.
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
The ethboot configuration inherits splashscreen settings from
am62x_evm_a53_defconfig. Use the prune fragment to disable this
functionality as a baseline before adding targeted splashscreen support
in follow-up commits.
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Add config fragment to disable splashscreen. This is especially useful
for platforms such as AM62P as splash needs to be disabled while using
TI-DM firmware with display sharing feature enabled.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Add config fragment to enable splashscreen functionality for AM62x
platforms. This fragment can be included by defconfigs that require
splashscreen support.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Tom Rini <trini@konsulko.com> says:
This series does a few small but important cleanups to how we check for,
and initialize a bloblist. The first thing is that the way things are
done today, our HANDOFF code can only work with a fixed bloblist
location, so express that requirement in Kconfig. Next, we demote the
scary message about "Bloblist at ... not found" to a debug because we
most often see that because the bloblist doesn't (and can't) exist yet.
Finally, we remove bloblist_maybe_init and split this in to an exists
and a real init. This results in practically no growth (between 8 bytes
growth to 12 bytes saved, with some outliers saving much more thanks to
knowing it's impossible to have been passed a bloblist yet). This also
cleans up some of the code around checking for / knowing about a
bloblist existing.
Link: https://lore.kernel.org/r/20260519162225.770071-1-trini@konsulko.com
With bloblist, we need to both see if one already exists as well as
create one if it does not. However, the current implementation leads to
odd cases where we attempt to create a bloblist before this is possible
and have things be overly complicated when we are given one to work
with.
This reworks things to instead have a bloblist_exists function, which as
the name implies checks for an existing bloblist. This is used in
the case of booting, to see if we have one and in turn if we have a
device tree there as well as in the bloblist_init function to see if we
need to do anything.
In practical details, we move the logic from bloblist_init that was
checking for a bloblist to the new bloblist_exists function and then can
clarify the logic as it is much easier to state when we know we do not
have one rather than all the ways we might have one. Then we have the
locations that set gd->bloblist now also set the GD_FLG_BLOBLIST_READY
flag.
Reviewed-by: Raymond Mao <raymondmaoca@gmail.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
The message about not finding a bloblist will quite often be seen at
least once, and is non-fatal. Demote this to a log_debug message from a
log_warning message.
Reviewed-by: Raymond Mao <raymondmaoca@gmail.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Currently, the only way we support passing a bloblist from one stage to
the next is via the BLOBLIST_FIXED mechanism. Update the Kconfig logic
to express this constraint.
Reviewed-by: Raymond Mao <raymondmaoca@gmail.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
U-Boot does not support loadable modules, therefore using 'tristate'
in Kconfig is incorrect since the 'm' option cannot be selected.
Replace tristate with bool for the affected LCD panel drivers to
reflect the U-Boot build model and avoid misleading configuration
options.
No functional change intended.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
Fix the indentation of the help text for VIDEO_LCD_NOVATEK_NT35510 and
VIDEO_LCD_ORISETECH_OTM8009A to align with the standard Kconfig format.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Linux' simplefb driver allows setting the memory-region property to a
phandle to a node that describes the memory to be used for the
framebuffer. If it is present, it will override the "reg" property.
This adds support for parsing the property and prefers it if present.
Signed-off-by: Aelin Reidel <aelin@mainlining.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The framebuffer buffer might not be mapped on some devices.
This is #ifdef'ed for ARM64 since mmu_map_region() is not defined for
any other architecture.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
The VIDEO_TIDSS functionality can only work with PANEL enabled, so
express this dependency in Kconfig for all phases.
Signed-off-by: Tom Rini <trini@konsulko.com>
The VIDEO_LCD_RAYDIUM_RM68200 functionality can only work with BACKLIGHT
enabled, so express this dependency in Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
Some error messages emitted while loading the splash image are too
cryptic and don't provide any insights into the failure being a splash
related issue, such as 'Error (-2): cannot determine file size' etc.
This patch fixes the error codes by adding the function name to the
error print.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
[trini: Add missing ',' and wrap to 80-width]
Signed-off-by: Tom Rini <trini@konsulko.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
In h_read_settings, val variable could be NULL due to
ofnode_read_prop returning an error. This variable
would then be used as the src in strcpy.
Add a NULL check after calling ofnode_read_prop.
Signed-off-by: Francois Berder <fberder@outlook.fr>
Reviewed-by: Simon Glass <sjg@chromium.org>
The phyCORE-AM62x and phyCORE-AM64x R5 SPL detects the populated DDR
size from the SoM EEPROM and falls back to 2 GB if detection fails. For
boards without a populated EEPROM or if no detection needed, the detection
can be bypassed via CONFIG_PHYCORE_AM6{2,4}X_RAM_SIZE_FIX and one of
the CONFIG_PHYCORE_AM6{2,4}X_RAM_SIZE_<size> choices.
Add a "DDR RAM Size" section to both board docs describing this
behaviour and listing the available size options (1/2/4 GB for AM62x,
1/2 GB for AM64x).
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add two short sections to the common K3 phyCORE docs.
Describe the default boot flow and its deprecated version.
And write down the use of the watchdog.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
A handful of small inaccuracies had crept into the phyCORE-AM6x docs.
Mostly typos and formatting Issues. Fix them. While at it, update the
am62a board to use the correct product link.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
RAUC slot selection is now handled by the RAUC bootmeth, which all
phytec K3 boards use. Remove the unused env-based logic.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Martin Schwan <m.schwan@phytec.de>
Mirror the j721s2 changes from commit c4fcf9b806 ("board: ti: j7*:
Update rm-cfg and tifs-rm-cfg") to repurpose allocated resources with
version V11.02.07 of k3-resource-partition.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Dominik Haller <d.haller@phytec.de>
Add rcfg_yaml_tifs node override to use tifs-rm-cfg.yaml instead of
the default rm-cfg.yaml for the phyCORE-AM62x SoM.
This enables binman to include the tifs-rm-cfg.yaml configuration
when building tiboot3 images, bringing the phyCORE-AM62x SoM in line
with other K3 devices that already use tifs-rm-cfg.yaml.
This builds on the tifs-rm-cfg file added earlier in this series.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add a separate tifs-rm-cfg.yaml so the TIFS bundle uses the trimmed
TIFS view instead of reusing rm-cfg.yaml, matching the rest of the
AM62 boards.
Mirrors commit 964bda9e80 ("board: ti: am62x: tifs-rm-cfg: Add the
missing tifs-rm-cfg:") for the phyCORE-AM62x SoM.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Ernest Van Hoecke <ernestvanhoecke@gmail.com> says:
This series updates the Resource Management configuration for Toradex
K3-based boards and makes sure the TIFS-specific RM configuration is
used where applicable.
For Verdin AM62P, the tifs-rm-cfg.yaml file is refreshed with
k3-resource-partition V12.00.00 so that it stays in sync with the
existing rm-cfg.yaml update for the v11.02.09 and v12.00.00 TIFS
firmware resource reservation.
For Verdin AM62, the missing tifs-rm-cfg.yaml file is added. The file
matches the TI AM62x configuration, and rm-cfg.yaml was verified to
remain unchanged when regenerated with the same tool version.
For Aquila AM69, both rm-cfg.yaml and tifs-rm-cfg.yaml are updated to
match the resource allocation changes already present in the TI J784S4
configuration files.
Finally, the Verdin AM62 and Verdin AM62P binman descriptions are
updated to use tifs-rm-cfg.yaml for the TIFS RM fragment when building
tiboot3 images, following the same pattern used by the corresponding TI
AM62x/AM62Px platforms.
The generated/updated files were compared against the matching TI board
configuration files where applicable.
Link: https://lore.kernel.org/r/20260508-v1-update-rm-cfg-v1-0-ec9d033f8ec1@toradex.com
Add rcfg_yaml_tifs node overrides to use tifs-rm-cfg.yaml instead of
the default rm-cfg.yaml for Verdin AM62 and Verdin AM62P platforms.
This enables binman to include the tifs-rm-cfg.yaml configuration when
building tiboot3 images in line with other K3 devices that already use
tifs-rm-cfg.yaml.
This follows the changes done by TI to their am62x/am62px platforms. [1]
[1] commit 41814276f0 ("arm: dts: k3: am62x/am62px: Enable tifs-rm-cfg in binman")
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Repurpose the allocated resources with version V12.00.00 of
k3-resource-partition, matching the update made for the TI J784S4
configuration files. [1]
The Aquila AM69 rm-cfg.yaml and tifs-rm-cfg.yaml remain aligned with
board/ti/j784s4/*-rm-cfg.yaml.
[1] commit c4fcf9b806 ("board: ti: j7*: Update rm-cfg and tifs-rm-cfg")
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Add the previously missing TIFS RM configuration, generated with
V12.00.00 of k3-resource-partition.
This file is exactly the same as board/ti/am62x/tifs-rm-cfg.yaml.
rm-cfg.yaml and tifs-rm-cfg.yaml need to be in sync, this was already
taken care of by TI. [1]
It was verified that rm-cfg.yaml also remained unchanged with V12.00.00
of the tool.
[1] commit 64ebab10b5 ("toradex: verdin-am62: rm-cfg: Update rm-cfg to reflect new resource reservation")
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
TI updated rm-cfg for v11.02.09 of the TIFS firmware. [1]
Refresh the tifs-rm-cfg.yaml as well, with version V12.00.00 of
k3-resource-partition, so that it remains in sync with rm-cfg.yaml.
rm-cfg.yaml was also updated with V12.00.00 of the tool and noted to
have no changes.
[1] commit a66704e9a1 ("board: toradex: verdin-am62p: rm-cfg: Update rm-cfg to reflect new resource reservation")
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
On the j722s platform, the DM firmware resets the wkup_r5 core at boot to
enable both of its TCM memories.
This reset sequence involves three steps:
- Acquiring processor ownership of wkup_r5
- Configuring the core and requesting a reset via TIFS
- Releasing ownership.
When the Linux remoteproc driver comes up, it acquires ownership of wkup_r5
to query its state, making A53_2 the new owner.
During system suspend, TIFS saves the processor ACL[1] table to DDR as
part of its context.
On resume, TIFS restores the ACL table, leaving A53_2 as the owner of
wkup_r5. At this point, DM (WKUP_0_R5_0 host[2]) no longer has ownership
and is therefore unable to perform the reset sequence it needs,
causing it to crash.
To fix this, configure the wkup_r5[3] processor with dual ownership:
- WKUP_0_R5_0 (Secure) as primary owner.
- A53_2 (Non-Secure) as secondary owner.
[1] https://software-dl.ti.com/tisci/esd/latest/3_boardcfg/BOARDCFG_SEC.html#pub-boardcfg-proc-acl
[2] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j722s/hosts.html
[3] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j722s/processors.html
Signed-off-by: Abhash Kumar Jha <a-kumar2@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Marek VasutandMarek Vasut
Tom Rini
Swamil JainandTom Rini
Devarsh ThakkarandTom Rini
Francois BerderandTom Rini
Alexey CharkovandTom Rini
Dario BinacchiandTom Rini
Aelin ReidelandTom Rini
Luca WeissandTom Rini
Anshul DalalandTom Rini
Wadim EgorovandTom Rini
Ernest Van HoeckeandTom Rini
Abhash Kumar JhaandTom Rini