The actual logic to allocate a region of memory is in the
_lmb_alloc_base() function. The lmb_alloc() API function calls
lmb_alloc_base(), which then calls _lmb_alloc_base() to do the
allocation. Instead, call the _lmb_alloc_base() directly from both the
allocation API's, and move the error message to the _lmb_alloc_base().
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The functions to check if the two said regions are adjacent or overlap
are pretty similar in nature. Club the functionality into a single
function lmb_regions_check() and return the appropriate return value
to signify this aspect.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
U-Boot allows re-use of already reserved memory through the
lmb_reserve() and lmb_alloc_addr() API's. This memory re-use is
allowed only when the flag of the existing reserved region and that of
the requested region is LMB_NONE. A check was put in the
lmb_add_region_flags() in commit 8b8b35a4f5 to handle the scenario
where an already reserved region was re-requested with region flag
other than LMB_NONE -- the function then returns -EEXIST in such a
scenario.
The lmb_reserve() function now does a check for a reservation request
with existing reserved regions, and returns -EEXIST in case of an
overlap but when the flag check fails. Remove this now redundant check
from lmb_add_region_flags().
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The lmb_add_region_flags() first checks if the new region to be added
can be coalesced with existing regions. The check stops if the two
regions are adjecent but their flags do not match. However, it is
possible that the newly added region might be adjacent with the next
existing region and with matching flags. Check for this possibility by
not breaking out of the loop.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The lmb_fix_over_lap_regions() function is called if the added region
overlaps with an existing region. The function then fixes the overlap
and removes the redundant region. However, it makes certain
assumptions. One assumption is that the overlap would not encompass
the existing region. Another assumption is that the overlap only
occurs between two regions -- the scenario of the added region
overlapping multiple existing regions is not being handled. Handle
these cases by instead calling lmb_resize_regions(). Also remove the
now superfluous lmb_fix_over_lap_regions().
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The logic used in lmb_alloc() takes into consideration the existing
reserved regions, and ensures that the allocated region does not
overlap with any existing allocated regions. The lmb_reserve()
function is not doing any such checks -- the requested region might
overlap with an existing region. This also shows up with
lmb_alloc_addr() as this function ends up calling lmb_reserve().
Add a function which checks if the region requested is overlapping
with an existing reserved region, and allow for the reservation to
happen only if both the regions have LMB_NONE flag, which allows
re-requesting of the region. In any other scenario of an overlap, have
lmb_reserve() return -EEXIST, implying that the requested region is
already reserved.
Add corresponding test cases which check for overlapping reservation
requests made through lmb_reserve() and lmb_alloc_addr(). And while
here, fix some of the comments in the test function being touched.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
- Ensure `free_ctx` is called in both error and success paths.
- Fix memory leak in `ctx.signature` when `do_add` fails."
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
The current code has a problematic corner case with formar "%c" and
0 as parameter. The proper zero byte is being emitted into digit buffer
but the final copy into outstr expects null-terminated string and doesn't
copy the required \0 byte. This has lead to malformed TFTP packets, refer
to tftp_send() which relies on %c to generate multiple zero-terminated
strings in one buffer.
Introduce a variable to force the copy of one character in this case.
The new behaviour is consistent with non-tiny implementation.
Reported-by: Chintan Vankar <c-vankar@ti.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Siddharth Vadapalli <s-vadapalli@ti.com> says:
This series enables configs for USB DFU boot, USB DFU flash and USB Mass
Storage command for J784S4. The device-tree changes required for enabling
these features will be posted as patches to Linux device-tree mailing lists
and will eventually make it to U-Boot via DT Sync.
Link: https://lore.kernel.org/r/20250218094950.2542006-1-s-vadapalli@ti.com
Enable support for USB DFU boot via USB0 instance of USB on J784S4 SoC
which is a Cadence USB Controller. Additionally, enable support for USB
DFU flash and USB Mass Storage (UMS) command. While at it, sync with
savedefconfig.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The USB0 instance of USB on J784S4 SoC is a Cadence USB Controller and
supports USB DFU boot. Enable support for it.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Enable ESM configs. ESMs are a prerequisite to enable
watchdog reset functionality. The ESM aka error signalling module
is primarily responsible for sensing the watchdog reset event.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Initialize MCU & MAIN Domain ESMs as a prerequisite to enable
watchdog reset functionality. The ESM aka error signalling module
is primarily responsible for sensing the watchdog reset event.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Use preload_check_sign to authenticate the generated image when testing the
preload signature in testPreLoad().
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
pre-load related config options are enabled to have support of it in host
tools.
'CONFIG_FIT_SIGNATURE=y' is being automatically removed since it is
selected by CONFIG_IMAGE_PRE_LOAD_SIG.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
preload_check_sign is added so that it can be used to authenticate images
signed with the pre-load signature supported by binman and U-Boot.
It could also be used to test the signature in binman tests signing
images with the pre-load.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Add an empty inline declaration when compiling tools for a host where
unmap_sysmem() is not defined.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
rsa_verify_openssl() is used in lib/rsa/rsa-verify.c to authenticate data
when building host tools.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Baocheng Su <baocheng.su@siemens.com> says:
This introduces a sysinfo driver which also permits SMBIOS support.
The first 10 patches of v2 have already been applied. The remaining is
solely the sysinfo driver. To maintain consistency and ease of searching
through the history, the series title remains unchanged.
Link: https://lore.kernel.org/r/20250218023614.52574-1-baocheng.su@siemens.com
Drop the info structure parsing of the board in favor of our new sysinfo
driver to avoid code duplication.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
[Jan: rebasing, split-up, cleanup]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This brings a sysinfo driver and DT entry for the IOT2050 board series.
It translates the board information passed from SE-Boot to SPL into
values that can be retrieved via the sysinfo API. Will is already used
to fill the SMBIOS table when booting via EFI.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
[Jan: split-off as separate patch, cleanup]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Add a new field SYSID_BOARD_RAM_SIZE_MB to sysinfo structure to store
the size of RAM in MB. dram_init can use this field to get the RAM size
via sysinfo driver.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
This commit introduces a new API to the sysinfo module, allowing access
to data elements. This is particularly useful for handling data with
multiple instances, such as MAC addresses.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
During dma memcpy, bcdma descriptor gets allocated for each
transaction and not freed after completion of that transaction.
So, avoid the memory allocation for every transaction.
Add one descriptor per dma device and allocate it once in
resource setup. This descriptor can now be used for all
dma memcpy transactions optimally.
Signed-off-by: Prasanth Babu Mantena <p-mantena@ti.com>
serial_out_dynamic() takes a u8* addr and uses it for 8-bit or 32-bit
accesses, depending on the value of plat->reg_width. This results in a
pointer type mismatch that the compiler may even turn into an error:
drivers/serial/ns16550.c: In function ‘serial_out_dynamic’:
drivers/serial/ns16550.c:115:42: error: passing argument 1 of ‘out_be32’ from incompatible pointer type [-Wincompatible-pointer-types]
115 | out_be32(addr, value);
| ^~~~
| |
| u8 * {aka unsigned char *}
This error was observed on PowerPC.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
If there is an unallocated memory area before the last, filling parting
the size calculation for MTD_SIZE_REMAINING does not take this hole
into account.
Fix this by calculating the remaining size just based on total size
and partition offset.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Rename the variants of env_mmc_load() for redundant and non-redundant
environment to env_mmc_load_redundant() and env_mmc_load_singular()
respectively and convert the env_mmc_load() implementation to use of
if (IS_ENABLED(...)). As a result, drop __maybe_unused from
mmc_env_is_redundant_in_both_boot_hwparts().
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Introduce a new function mmc_env_is_redundant_in_both_boot_hwparts()
which replaces IS_ENABLED(ENV_MMC_HWPART_REDUND) and internally does
almost the same check as the macro which assigned ENV_MMC_HWPART_REDUND
did, and call it in place of IS_ENABLED(ENV_MMC_HWPART_REDUND).
The difference compared to IS_ENABLED(ENV_MMC_HWPART_REDUND) is
in the last conditional, which does not do plain macro compare
(CONFIG_ENV_OFFSET == CONFIG_ENV_OFFSET_REDUND), but instead does
mmc_offset(mmc, 0) == mmc_offset(mmc, 1). If OF_CONTROL is not
in use, this gets optimized back to original macro compare, but
if OF_CONTROL is in use, this also takes into account the DT
properties u-boot,mmc-env-offset and u-boot,mmc-env-offset-redundant.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/24876
- Convert imx6q-lxr and imxrt1050 to OF_UPSTREAM.
- Fix potential memory leak on ]imx/imx8/imx8m]image.
- Restrict DDR_SI_TEST to only Siemens Capricorn board.
- Fix CONFIG_BOOTCOUNT_ALTBOOTCMD on Data Modul and DH imx8m boards.
The imx6q-lxr devicetree has landed in kernel 6.13.
Switch to OF_UPSTREAM to make use of the upstream devicetree.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Move content of dh_imx6_defconfig into dh_imx6.config. Retain legacy
dh_imx6_defconfig as multi-config for all DH i.MX6 DHSOM based boards.
Introduce separate imx6_dhcom_drc02_defconfig, imx6_dhcom_pdk2_defconfig
and imx6_dhcom_picoitx_defconfig for each i.MX6 DHSOM based board, to
make build for those boards easier. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Deduplicate the config files again, move CONFIG_BOOTCOUNT_ALTBOOTCMD
into common imx8mp_dhsom.config .
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Deduplicate the config files again, move CONFIG_BOOTCOUNT_ALTBOOTCMD
into common imx8m_data_modul.config .
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
The environment is missing quotes for string variable, add them.
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Dynamic memory, referenced by 'line', is allocated at imx8mimage.c:187
by calling function 'getline' and lost at imx8mimage.c:210.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
Dynamic memory, referenced by 'line', is allocated at imx8image.c:270
by calling function 'getline' and lost at imx8image.c:294.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
Dynamic memory, referenced by 'line', is allocated at imximage.c:761
by calling function 'getline' and lost at imximage.c:793.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
The DDR_SI_TEST config option is only relevant to the i.MX8 Capricorn
board.
Make DDR_SI_TEST depend on DDR_SI_TEST so that it does not show up
on other targets.
Signed-off-by: Liya Huang <1425075683@qq.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
The device tree for imxrt1050 is now
available in the /dts/upstream directory.
Migrate board to use OF_UPSTREAM.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Instead of doing another lookup, trivially access the struct mii_dev
embedded in struct bb_miiphy_bus . No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Instead of doing another lookup, trivially access the struct mii_dev
embedded in struct bb_miiphy_bus . No functional change.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Instead of doing another lookup, trivially access the struct mii_dev
embedded in struct bb_miiphy_bus . No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
The struct bb_miiphy_bus embeds struct struct mii_dev, which
already contains one copy of name field. Drop the duplicate
top level copy of name field.
The a38x code does static assignment of disparate names, use
snprintf(...) to fill in matching name in probe to avoid any
breakage.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Sughosh GanuandTom Rini
Anton MoryakovandTom Rini
Alexander SverdlinandTom Rini
Siddharth VadapalliandTom Rini
KeerthyandTom Rini
Paul HENRYSandTom Rini
Baocheng SuandTom Rini
Prasanth Babu MantenaandTom Rini
J. NeuschäferandTom Rini
Alexander SteinandTom Rini
Marek VasutandTom Rini
Fabio EstevamandFabio Estevam
Maks MishinandFabio Estevam
Liya HuangandFabio Estevam
Jesse TaubeandFabio Estevam
Marek Vasut