The current cmd_ut_sub[] array was fine when there were only a few test
suites. But is quite unwieldy now:
- it requires a separate do_ut_xxx for each suite, even though the code
for most is almost identical
- running more than one suite requires running multiple commands, and
there is no record of which suites passed or failed
- 'ut all' runs all suites but reports their results individually
- we need lots of #ifdefs in the array, mirroring those in the makefile
but maintained in a separate place
In fact the tests are all in the same linker list. The suites are
grouped, so it is possible to access the information without a command.
Introduce a 'suite' array, which holds the cmd_ut_...() function to
call, but can also support running a suite without that function. This
means that the array of struct cmd_tbl is transformed into an array of
'struct suite'.
This will allow removal of many of the functions, particularly those
without test-specific init.
Signed-off-by: Simon Glass <sjg@chromium.org>
Most test suites have a _test suffix. This is not necessary as there is
also a ut_ prefix.
Drop the suffix so that (with future work) the suite name can be used as
the linker-list name.
Remove the suffix from the pytest regex as well, moving it to the top of
the file, as it is a constant.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a Python test which runs 'ut all' and then checks that the expected
suites are present and all tests in each suite are run.
This can help to check that nothing is missing.
Update 'ut info' to ignore the 'all' suite when counting the number of
suites, since that is really just a combination of all the other suites.
Adjust the message for skipped tests so that appears even if no
particular test was selected. This helps the new 'test_suite' test see
what is going on.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is helpful to see a list of available suites. At present this is
handled by the longhelp for the 'ut' command, but this is not in a
format which can be easily parsed by python tests.
Add a -s option to show this. At present it is not possible to show the
number of tests in each suite, but future work will address this. For
now, show a ?
Signed-off-by: Simon Glass <sjg@chromium.org>
Some suites have a different name from that used in the linker list.
That makes it hard to programmatically match the name printed when the
suite runs to the linker-list name it has.
Update the names so they are the same.
Signed-off-by: Simon Glass <sjg@chromium.org>
A few messages lack a newline so the test output shows the next
test-name on the same line. For example:
Beware: this test sets local variable dollar_bar and dollar_quux
and they cannot be unset!Test: hush_test_env_dollar: dollar.c
This is confusing, so fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
A limitation of most linker_list macros is that they cannot easily be
used in data structures. This is because they include code inside their
expressions.
Provide a way to support this, with new ll_start_decl() and
ll_end_decl() macros.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move these operations into separate functions so that it is clearer what
is needed. These functions can also be called from somewhere other than
ut_run_list().
Signed-off-by: Simon Glass <sjg@chromium.org>
Delete tifs DT node as part of fixup.
TISCI API reported msmc_size, does not include 64KB reserved size for
tifs aka MSMC comms memory, see documentation[0].
As part of fixup, original code uses TISCI API reported msmc_size as
size for SRAM DT node.
tifs node is similar to l3-cache, which should hold address above
msmc_size, and should be deleted before passing control to OS.
[0] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/general/core.html?highlight=msmc#tisci-msg-query-msmc
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Include k3_rproc.env to access rproc boot commands and specify rproc
firmware names for adding remoteproc support in J722S SoCs.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
The default value for the mux to select the parent clock,
AUDIO_REFCLK1_CTRL_CLK_SEL is '11111' (31) but the mux input for 31
is marked as 'Reserved' so the ti-sci-clk call for get-parent fails.
Mark it to a valid value, '11100' (28) for MAIN_PLL4_HSDIV2_CLKOUT
to get rid of the linux failures during boot-time like:
"[ 1.573193] ti-sci-clk 44083000.system-controller:clock-controller:
get-parent failed for dev=157, clk=34, ret=-19"
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
When converting to ofnode `ofnode_read_u32` was accedentally used to
replace `fdtdec_get_int` instead of `ofnode_read_u32_default`.
Use `ofnode_read_u32_default` to fix this.
Fixes: 59382d2 ("pinctrl: imx: Convert to use livetree API for fdt access")
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Guard binman nodes with CONFIG_OPTEE to fix the following error
when building without optee support:
BINMAN .binman_stamp
Image 'image' has faked external blobs and is non-functional: tee.bin
Image 'image' is missing optional external blobs but is still functional: tee-os
/binman/section/fit/images/tee/tee-os (tee.bin):
See the documentation for your board. You may need to build Open Portable
Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin
Some images are invalid
make: *** [Makefile:1135: .binman_stamp] Error 103
While at it, only pass tee to the loadables lines when CONFIG_OPTEE is
defined.
Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Yannic Moog <y.moog@phytec.de>
i.MX95 uses enetc version 4.1 controller. Update the enetc for i.MX95.
Add ARM-specific cache handling and i.MX95 specific register layout
handling.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de> # Clean up
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
The verdor ID and device ID of i.MX95 EMDIO are different from LS1028A
EMDIO, so add new vendor ID and device ID to pci_device_id table to
support i.MX95 EMDIO.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de> # Clean up
Signed-off-by: Ye Li <ye.li@nxp.com>
The netc-blk-ctrl driver is used to configure Integrated Endpoint
Register Block (IERB) and Privileged Register Block (PRB) of NETC.
For i.MX platforms, it is also used to configure the NETCMIX block.
The IERB contains registers that are used for pre-boot initialization,
debug, and non-customer configuration. The PRB controls global reset
and global error handling for NETC. The NETCMIX block is mainly used
to set MII protocol and PCS protocol of the links, it also contains
settings for some other functions.
Note the IERB configuration registers can only be written after being
unlocked by PRB, otherwise, all write operations are inhibited. A warm
reset is performed when the IERB is unlocked, and it results in an FLR
to all NETC devices. Therefore, all NETC device drivers must be probed
or initialized after the warm reset is finished.
Ported from Linux 6.13-rc as of commit
fe5ba6bf91b3 ("net: enetc: add initial netc-blk-ctrl driver support")
Signed-off-by: Marek Vasut <marex@denx.de>
Pass struct udevice * into the register accessors, so the accessors can reach
driver data, which contain device specific register offsets.
Signed-off-by: Marek Vasut <marex@denx.de>
Introduce driver data for each PCI device. The driver data carry
offsets of registers which differ between different SoCs.
Signed-off-by: Marek Vasut <marex@denx.de>
Split register accessors to the port base/station interface/port/mac
registers as those are at different offsets on different SoCs. This
is a preparatory patch which will allow addition of adjusted offsets
for new SoCs easily.
Signed-off-by: Marek Vasut <marex@denx.de>
Move register accessors from header files and turn them into proper
inline functions, so typechecking can be done on them. Drop no longer
enetc_port_regs() and unused enetc_read() and enetc_bdr_read().
Signed-off-by: Marek Vasut <marex@denx.de>
Introduce mapping function enetc_dev_id(), which converts PCIe BDF of
the ENETC into linear incrementing index usable e.g. as interface index.
This replaces the current ad-hoc calculation used in the code with a
dedicated function. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Rename the current driver structure and matching ops and PCI IDs
and add _ls suffix to indicate this content is LS specific. This
is done in preparation for addition of i.MX95 ENETCv4 which will
require slightly different structure content.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass udevice pointer into enetc_enable_si_port() so tests like
enetc_is_ls1028a() an be used in the function. No functional
change.
Signed-off-by: Marek Vasut <marex@denx.de>
The entire content of the loop can be folded into enetc_set_ierb_primary_mac(),
do it. This changes the behavior slightly such that the DT is only updated in
case of a LS1028A, which is the only SoC with ethernet MAC path in DT matching
"/soc/pcie@1f0000000/ethernet@%x,%x" anyway, so this slight change should have
no impact.
Signed-off-by: Marek Vasut <marex@denx.de>
Use enetc_is_ls1028() instead of ifdef around enetc_set_ierb_primary_mac()
and clean up the function. No functional change intended.
Signed-off-by: Marek Vasut <marex@denx.de>
Introduce accurate test for LS1028A compatibility based both on
IS_ENABLED(CONFIG_ARCH_LS1028A) and PCI vendor ID. This is done
in preparation for adding ENETCv4 support, which has a different
PCI vendor ID.
Signed-off-by: Marek Vasut <marex@denx.de>
Simon GlassandTom Rini
Udit KumarandTom Rini
Beleswar PadhiandTom Rini
Jayesh ChoudharyandTom Rini
Heinrich SchuchardtandTom Rini
Leonard AnderweitandFabio Estevam
Jesse TaubeandFabio Estevam
Fabio EstevamandFabio Estevam
Alice GuoandFabio Estevam
Marek VasutandFabio Estevam
Philippe ReynesandTom Rini