Introduce generate_and_check_fit_image() and call it with various
parameters to test various configurations of the fitImage. This is
identical to the existing test, expect for the code duplication.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
The SCMI shared memory area is no longer automatically marked as
non-cacheable after the commit a5a0134570 ("firmware: scmi: Drop
mmu_set_region_dcache_behaviour() misuse").
This change in behavior cause Rockchip RK3588 boards to fail boot with:
SoC: RK3588
DRAM: 8 GiB
scmi-over-smccc scmi: Channel unexpectedly busy
scmi_base_drv scmi-base.0: getting protocol version failed
scmi-over-smccc scmi: failed to probe base protocol
initcall_run_r(): initcall initr_dm() failed
### ERROR ### Please RESET the board ###
Update the memory mapping on RK3588 to mark the SCMI shared memory area
as non-cacheable to fix the SCMI shared memory based transport issue
that prevented RK3588 boards from booting.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Fix two memory allocation bugs in label_boot_extension():
1. When label->fdtdir is not set, overlay_dir was used without any
memory allocation.
2. When label->fdtdir is set, the allocation size was incorrect,
using 'len' (just the fdtdir length) instead of 'dir_len' (which
includes the trailing slash and null terminator).
Resolve both issues by moving the memory allocation and string
formatting outside the conditional block, resulting in clearer code
flow and correct sizing in all cases.
Closes: https://lists.denx.de/pipermail/u-boot/2025-November/602892.html
Addresses-Coverity-ID: 638558 Memory - illegal accesses (UNINIT)
Fixes: 935109cd9e ("boot: pxe_utils: Add extension board devicetree overlay support")
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Tested-by: Surkov Kirill <fanra3.tk@gmail.com>
Size of array buf was incorrect due to sizeof returning the
size of an integer (typically 32 bits) instead of a u64 type
(64 bits). Hence, buf array was shorter than expected.
Signed-off-by: Francois Berder <fberder@outlook.fr>
Reviewed-by: Simon Glass <sjg@chromium.org>
Pull request efi-2026-01-rc3-2
CIL https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/28454
Documentation:
* board: ti: am6254atl_sk: correct value of PRELOADED_BL33_BASE
* pytest: fix u-boot-test-flash typo
* samsung: Fix PXE description for the E850-96 board
* board: ti: k3: Update TI firmware repository URL to GitHub
* add missing macro descriptions to include/test/ut.h and add it to
the API documenation
* rearrange the description of DM tests and describe return values
Testing:
* Enable CI testing ACPI on qemu-riscv64_smode_acpi_defconfig
* Add qemu-riscv64_smode_defconfig to the CI tests
* Generalize tests such that they can run on RISC-V QEMU
- fdt_test_apply requires CONFIG_OF_LIBFDT_OVERLAY
- cmd/fdt: do not assume RNG device exists
- cmd/bdinfo: make no flash assumption
- cmd/bdinfo: consider arch_print_bdinfo() output
- common/print: do not use fixed buffer addresses
- cmd/fdt: do not use fixed buffer addresses
- raise CONFIG_CONSOLE_RECORD_OUT_SIZE default to 0x6000
* enable CONFIG_CONSOLE_RECORD=y on qemu-riscv64_smode_acpi
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmkg1IsACgkQxIHbvCwF
# GsQVLA//dmiApob+J9FUhD8joD+DaKSNfLYmv8zwfIFL2xRxx7D+CQT+r+I9FJYI
# KojiLyn4PE/5VOm+wrsvAoYoMLJwAHvg5nmYJLLzvm6V//DLd1AEopP/+Uh8gEVW
# xYGLcvDyGgZpraAhcmqRnAS89py3SigwGzhcUMbT6ZC6pgMVEsBpg8XeMpY7N05c
# rwyqFAAPD8RcF7veQCpry87NiK5o+9YuM1zKl5sDFOpEWKq5ToNwhQ00bnux9lUd
# HWz9X6ge58iFiMXRqUCnOaPeXeChn9ejyEiKtfQ0JtykOf9NT2WMdD2VKe9PCYsd
# f7OynJTGG2OXTKBhon/xj75itiTm7EELc/FHwHEdtZIIHgpi/C33yQgKxLf9mtUo
# Z7DKYpPoaTCbJhs9LCK942KPtshbtAJLKTVqyBPo7Jn0mneeCQUsbaQRU7JruJTK
# hKluUjsAry3Do3wv/w6B8R6MMgfpBktPkqjg9e/maSdhYdkNAYpjajtORgpqmJRV
# HTGJXfL3qFC50jlenlMYOm4Qake33MIMzubaxoM3j5ENDUJ7KAbWADEoWDpve8Tu
# b/fX8uuW+g2T18Y/M9Bsk/jaUjDTx0xtZUSYNIIQJFDaJMzUxGYWlmtXhLZwFU8g
# 7S5pBmgxoSAtQSMAeoJPJp9FSgXYqiGLUeSwcOH2NaPn0lLFvK0=
# =D0Yy
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Nov 2025 03:07:23 PM CST
# gpg: using RSA key 6DC4F9C71F29A6FA06B76D33C481DBBC2C051AC4
# gpg: Good signature from "Heinrich Schuchardt <xypron.glpk@gmx.de>" [unknown]
# gpg: aka "[jpeg image of size 1389]" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6DC4 F9C7 1F29 A6FA 06B7 6D33 C481 DBBC 2C05 1AC4
Fix typo: `s/u-boot-test-flash1/u-boot-test-flash/`. The correct name of
the script doesn't have a "1" in it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
As stated in PXELINUX doc [1], the PXE configuration file has to be in
the format of "01-MAC-address" for Ethernet connections:
The hardware type (using its ARP "htype" code) and address, all in
lowercase hexadecimal with dash separators. For example, for an
Ethernet (i.e. ARP hardware type "1") with address
"88:99:AA:BB:CC:DD", it would search for the filename
"01-88-99-aa-bb-cc-dd".
Indeed, PXE implementation in U-Boot looks for files like that, as can
be seen from this call chain:
format_mac_pxe()
pxe_mac_path()
pxe_get()
extlinux_pxe_read_bootflow()
Mention the fact that PXE expects the configuration file to be prepended
with "01" in the PXE section of E850-96 documentation. While at it, fix
some other minor issues in PXE section.
[1] https://wiki.syslinux.org/wiki/index.php?title=PXELINUX
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
The SPL_TEXT_BASE for AM62x SiP is set as 0x82000000 whereas the
documentation states 0x81880000 as the PRELOADED_BL33_BASE value.
Both should match to allow TFA to jump to the address where A53 SPL has
been loaded.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Acked-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Update the TI firmware repository URL from git.ti.com to the
GitHub mirror at github.com/TexasInstruments/ti-linux-firmware
which is much more reliable.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reported-by: Tom Rini <trini@konsulko.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
QEMU comes with its own OpenSBI. For running RISC-V virtual machine
using one of qemu-riscv64_smode_defconfig or
qemu-riscv64_smode_acpi_defconfig is the natural choice.
Add the riscv64 smode configurations to the test scope.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
For some tests the current default of 0x400 for
CONFIG_CONSOLE_RECORD_OUT_SIZE is too small.
Raise the value to 0x6000 which is already the most common value.
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The location of memory depends on the board. Do not assume memory at fixed
memory locations. Use memalign() instead to allocate a buffer.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The location of memory depends on the board. Do not assume memory at fixed
memory locations. Use calloc() instead to allocate buffers.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
On x86 commit 9b35dbc93f ("x86: Show the timestamp counter with bdinfo")
has added another bdinfo output line.
On RISC-V commit 66b5ee9c55 ("riscv: add RISC-V fields to bdinfo
command") implemented arch_print_bdinfo().
Update the bdinfo test accordingly.
Fixes: 9b35dbc93f ("x86: Show the timestamp counter with bdinfo")
Fixes: 66b5ee9c55 ("riscv: add RISC-V fields to bdinfo command")
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
In fdt_test_chosen() currently we test if DM_RNG is configured.
CONFIG_DM_RNG=y does not imply that a RNG device actually exists.
For instance QEMU may be called with -device virtio-rng-device or not.
The current test framework evicts the virtio RNG device even if QEMU is
called with -device virtio-rng-device.
In the fdt_test_chosen() check if a RNG device exists.
Ignore 'No RNG device' messages.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The `fdt apply` sub-command is only available if CONFIG_OF_LIBFDT_OVERLAY
is enabled.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The Qualcomm SoCs votes for common resources via the RPMh subsystem.
Implement the necessary helpers for Interconnect providers to add the
nodes and vote via the RPPh "BCM" voters, which are vote endpoints for
each SoC subsystems. The APPS (ARM subsystem) has a dedicated endpoint.
The BCM voter will aggregate all the bandwidth for all the nodes
associated with a BCM voter, and internally the RPMh with also
aggregate all the votes from all the SoC subsystems for the same
BCM voter.
Link: https://patch.msgid.link/20251120-topic-interconnect-next-v5-4-e8a82720da5d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Let's introduce the Generic System Interconnect subsystem based on
the counterpart Linux framework which is used to vote for bandwidth
across multiple SoC busses.
Documentation for the Linux Generic System Interconnect Subsystem can
be found at [1].
Each bus endpoints are materialised as "nodes" which are linked together,
and the DT will specify a pair of nodes to enable and set a bandwidth
on the route between those endpoints.
The hardware resources that provide those nodes and provides the way
to vote for the bandwidth are called "providers".
The Interconnect uclass code is heavily based on the Linux one, with
some small differences:
- nodes are allocated as udevices instead of Linux idr_alloc()
- tag management is minimal, only normal xlate is supported
- getting nodes states at probe is not implemented
- providers are probed on demand while the nodes links are traversed
- nodes are populated on bind
- id management is simplified, static IDs and dynamics IDs can be used
- identical consume API as Linux, only implementation differs
Fully tested with associated DM test suite.
[1] https://docs.kernel.org/driver-api/interconnect.html
Link: https://patch.msgid.link/20251120-topic-interconnect-next-v5-1-e8a82720da5d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/28408
This pull request enhances NAND and SPI flash support, primarily
focusing on the Airoha EN7523 platform. The Airoha SPI driver receives
a major update, adding DMA, dual/quad-wire modes, and a critical
workaround to prevent flash damage if the UART_TXD pin shorts to Ground.
New chips supported include FudanMicro FM25S01A SPI-NAND and several
Winbond SPI NOR devices. Fixes include correcting Kconfig dependencies,
updating the mtd benchmark command to use lldiv(), and addressing minor
bugs in the generic spi-mem and SPL NAND code.
The ROM code of Xilinx Zynq searches the boot flash for a "BootROM header"
at increments of 32k (0x8000), beginning with 0x0000 for a
configuration without authentication and beginning with 0x8000
for a configuration with authentication. [1]
Move the offset of the SPL partition on the brcp1 board to 0x8000
so that both cases are the same, e.g. a board that is configured
without authentication can boot an SPL partition with or without
authentication.
[1] Zynq 7000 TRM, section 6.3 "BootROM Code"
Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20251029092252.115582-1-wolfgang.wallner@br-automation.com
Marek VasutandTom Rini
Marek VasutandNeil Armstrong
Jonas KarlmanandTom Rini
Kory Maincent (TI.com)andTom Rini
Francois BerderandTom Rini
Heinrich Schuchardt
David LechnerandHeinrich Schuchardt
Sam ProtsenkoandHeinrich Schuchardt
Anshul DalalandHeinrich Schuchardt
Vignesh RaghavendraandHeinrich Schuchardt
Sai Varun VenkatapuramandMichal Simek
Wolfgang WallnerandMichal Simek