Since commit 0dba45864b ("arm: Init the debug UART") the debug UART is
set up in _main() before early_system_init() is called.
Add a suitable board_debug_uart_init() function to set up the UART in
SPL.
Signed-off-by: Simon Glass <sjg@chromium.org>
The relocation offset can change in some initcall sequences. Handle
this and make sure it is used for all debugging statements in
init_run_list()
Update the trace test to match.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
[trini: Patch 1/3 was replaced by my series merged just prior to this,
Heinrich's cover letter is lightly edited and any mistakes are my own]
If we have multiple weak implementations of functions, the linker might
choose any of these.
The EFI sub-systems uses invalidate_icache_all() after loading binaries.
Both the EFI sub-system and cmd/cache.c provide a weak
invalidate_icache_all() function. Remove the EFI instance.
For ARM11 functional implementation of invalidate_icache_all is missing.
Add it.
If multiple weak implementations of a weak function exist, it is unclear
which one the linker should chose. cmd/cache.c already defines a weak
invalidate_icache_all().
We don't need a call to invalidate_icache_all() on x86.
ARM, RISC-V, and Sandbox provide an implementation.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
In EFI sub-system we rely on invalidate_icache_all() to invalidate the
instruction cache after loading binaries. Add the missing implementation on
ARM1136, ARM1176.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini <trini@konsulko.com> says:
Prior to this series we had some de-facto required cache functions that
were either unimplemented on some architectures or differently named.
This would lead in some cases to having multiple "weak" functions
available as well. Rework things so that an architecture must provide
these functions and it is up to that architecture if a "weak" default
function makes sense, or not.
It should be up to an architecture to decide how to implement cache
functions, and if they need to use weak functions or not. Allowing the
cache command to be built without cache functionality implemented is
unhelpful. Further, guard the call to noncached_set_region with
CONFIG_SYS_NONCACHED_MEMORY as that's when it's implemented and again is
an architecture specific detail.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Implement a weak default version of flush_dcache_all which is based on
the ARM default, which is to flush the entire range via
flush_dcache_range(...).
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Implement a weak default version of flush_dcache_all which is based on
the ARM default, which is to flush the entire range via
flush_dcache_range(...).
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
The implementation of icache_invalid appears to be doing what other
architectures call invalidate_icache_all so rename to match.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Implement a weak default version of flush_dcache_all which is based on
the ARM default, which is to flush the entire range via
flush_dcache_range(...).
Acked-by: Angelo Dureghello <angelo@kernel-space.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
The scan_part() function uses a struct uuid to store the little-endian
partition type GUID, but this structure should be used only to contain a
big-endian UUID. Use an efi_guid_t instead.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
When running within a Python venv we must use the 'coverage' tool (which
is within the venv) so that the venv packages are used in preference to
system packages. Otherwise the coverage tests run in a different
environment from the normal tests and may fail due to missing packages.
Handle this by detecting the venv and changing the tool name.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is used by some Binman entry types, so add it to allow more tests
to pass.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add this package so we can run code-coverage tests for Binman.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Buildman uses all available CPUs by default, so running more than one or
two concurrent processes is not normally useful.
However in some CI cases we want to be able to run several jobs at once
to save time. For example, in a lab situation we may want to run a test
on 20 boards at a time, since only the build step actually takes much
CPU.
Add an option which allows such a limit. When buildman starts up, it
waits until the number of running processes goes below the limit, then
claims a spot in the list. The list is maintained with a temporary file.
Note that the temp file is user-specific, since it is hard to create a
locked temporary file which can be accessed by any user. In most cases,
only one user is running jobs on a machine, so this should not matter.
Signed-off-by: Simon Glass <sjg@chromium.org>
When a file is removed by a commit (e.g. include/common.h yay!) it can
cause incremental build failures since one of the dependency files from
a previous build may mention the file.
Add an option to run 'make mrproper' automatically when a build fails.
This can be used to automatically resolve the problem, without always
adding the large overhead of 'make mrproper' to every build.
Signed-off-by: Simon Glass <sjg@chromium.org>
When this flag is enabled, 'make mrproper' is always used when
reconfiguring, so there is no point in doing it again.
Update this.
Signed-off-by: Simon Glass <sjg@chromium.org>
This cannot ever go at offset 0 since the descriptor is there. Use a
better offset for the ME, as used by link and coral, for example.
This matters when we start using assumed sizes for missing blobs.
Signed-off-by: Simon Glass <sjg@chromium.org>
Binman has a the useful feature of handling missing external blobs
gracefully, including allowing them to be missing, deciding whether the
resulting image is functional or not and faking blobs when this is
necessary for particular tools (e.g. mkimage).
This feature is widely used in CI. One drawback is that if U-Boot grows
too large to fit along with the required blobs, then this is not
discovered until someone does a 'real' build which includes the blobs.
Add a 'assume-size' property to entries to allow Binman to reserve a
given size for missing external blobs.
Signed-off-by: Simon Glass <sjg@chromium.org>
Correct formatting errors in the documentation.
Regenerate the entries.rst file to include this recent addition.
Signed-off-by: Simon Glass <sjg@chromium.org>
Regenerate the entries.rst file to include this recent addition.
Note that more docs are needed here, to actually describe the entry
type.
Note also that the entry type needs Binman tests added.
Signed-off-by: Simon Glass <sjg@chromium.org>
Somehow the class documentation has got out of sync with the generated
entries.rst file. Regenerating it causes errors, so correct these and
regenerate the entries.rst file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 809f28e721 ("binman: capsule: Use dumped capsule header...")
We currently don't have any boards enabling CONFIG_EFI_RT_VOLATILE_STORE.
We do have EFI selftests testing the feature though, so enable it in
all the sandbox platforms and test the functionality properly
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
commit 6e2228fb05 ("Merge patch series "Clean up arm linker scripts"")
was cleaning up linker scripts for armv7 and v8 in a similar fashion.
Several commits in the past -- e.g
commit d0b5d9da5d ("arm: make _end compiler-generated")
was moving symbols to be compiler generated. They were defined as c
variables in its own section to force the compiler emit relative a
reference. However, defining those in the linker script will do the
same thing since [0].
So let's remove the special sections from the linker scripts, the
variable definitions from sections.c, and define them as a symbols.
It's worth noting that the linker was discarding the symbols in the
older binary completely since the symbol definition had an extra _.
- new binary
$~ aarch64-linux-gnu-readelf -sW u-boot | grep efi_runtim
246: 000000000004acbe 13 FUNC LOCAL DEFAULT 14 vbe_req_efi_runtime_rand
3198: 0000000000318690 16 OBJECT LOCAL DEFAULT 29 efi_runtime_mmio
6359: 00000000000dedff 217 FUNC LOCAL DEFAULT 14 efi_runtime_relocate
7942: 00000000003074c0 136 OBJECT GLOBAL HIDDEN 29 efi_runtime_services
8869: 0000000000305e20 0 NOTYPE GLOBAL DEFAULT 27 __efi_runtime_rel_stop
9159: 0000000000305e20 0 NOTYPE GLOBAL DEFAULT 27 __efi_runtime_stop
9410: 0000000000305e20 0 NOTYPE GLOBAL DEFAULT 27 __efi_runtime_start
10137: 00000000005981bd 0 NOTYPE WEAK HIDDEN 33 efi_runtime.c.de5bed54
10470: 0000000000305e20 0 NOTYPE GLOBAL DEFAULT 27 __efi_runtime_rel_start
- old binary
$~ aarch64-linux-gnu-readelf -sW u-boot.old | grep efi_runtim
246: 000000000004acbe 13 FUNC LOCAL DEFAULT 14 vbe_req_efi_runtime_rand
3198: 0000000000318690 16 OBJECT LOCAL DEFAULT 29 efi_runtime_mmio
6359: 00000000000dedff 221 FUNC LOCAL DEFAULT 14 efi_runtime_relocate
7942: 00000000003074c0 136 OBJECT GLOBAL HIDDEN 29 efi_runtime_services
10135: 0000000000598320 0 NOTYPE WEAK HIDDEN 33 efi_runtime.c.de5bed54
$~ bloat-o-meter u-bool.old u-boot
add/remove: 0/0 grow/shrink: 1/1 up/down: 7/-4 (3)
Function old new delta
efi_memory_init 343 350 +7
efi_runtime_relocate 221 217 -4
Total: Before=2009902, After=2009905, chg +0.00%
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> # sandbox_defconfig on amd64, arm64, riscv64
Reviewed-by: Simon Glass <sjg@chromium.org>
Fixes: commit aac53d3d96 ("sandbox: Rename EFI runtime sections")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Prior to that, seeing the debug() messages required to enable DM_DEBUG
which defines DEBUG (and then _DEBUG) which in turn makes failing
assert() calls reset U-Boot which isn't necessarily what is desired.
Instead, let's migrate to dm_warn which is using log_debug when unset or
log_warn when set.
While at it, reword the DM_DEBUG symbol in Kconfig to explain what it
now actually does.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
outp always point to an unsigned type in ofnode_read_u* functions but
the format specifier is currently always using signed type.
This is an issue since the signed type can only contain half of the
unsigned type values above 0.
However, this now breaks another usecase. Indeed,
ofnode_read_s32_default is actually passing an s32 but it'll be printed
as a u32 instead. But since the function is called u32, it makes more
sense to have it print an unsigned value.
This was discovered because arm,smc-id = <0x82000010>; on RK3588S is
above the max signed value and therefore would return a negative signed
decimal value instead of its proper unsigned one.
Fixes: fa12dfa08a ("dm: core: support reading a single indexed u64 value")
Fixes: 4bb7075c83 ("dm: core: support reading a single indexed u32 value")
Fixes: 7e5196c409 ("dm: core: Add ofnode function to read a 64-bit int")
Fixes: 9e51204527 ("dm: core: Add operations on device tree references")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
A driver can have multiple compatible. When the id->compatible matches
for that driver, the first compatible supported by the driver is
currently returned, which gives the following confusing message:
- found match at 'rk3588_syscon': 'rockchip,rk3588-sys-grf' matches 'rockchip,rk3588-pmugrf'
Considering that the compatible passed in argument is necessarily the
one that exactly matched to enter this code path, there's no need to do
some elaborate logic, just print the driver name and the compatible
passed in argument.
Fixes: d3e773613b ("dm: core: Use U-Boot logging instead of pr_debug()")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
The dm_root_f field seems to be entirely write-only and hence
redundant, unless 'git grep' fails to find some access generated via
preprocessor token concatenation or similar.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
This does not work with sandbox at present. Fix it up to use map_sysmem()
to convert an address to a pointer.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Fix conflict and reformat to 80cols:
Signed-off-by: Simon Glass <sjg@chromium.org>
When a patch is added to a series after the initial version, there are no
changes to note except that it is new. This is typically done to suppress
the "(no changes in vN)" message. It's also nice to add a change to the
cover letter so reviewers know there is an additional patch. Add a tag to
automate this process a bit.
There are two nits with the current approach:
- It favors '-' as a bullet point, but some people may prefer '*' (or
something else)
- Tags (e.g. 'patman: ' in 'patman: foo bar') are not stripped. They are
probably just noise in most series, but they may be useful for treewide
series to distinguish 'gpio: frobnicate' from 'reset: frobnicate', so
I've left them in.
Suggestions for the above appreciated.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Most tags referring to commits (or patches) are named Commit-something. The
exception is Patch-cc. Add a Commit-cc alias so we can use whichever one is
convenient.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
If add_maintainers is set to False in the user's ~/.patman config, it will
cause the custom_get_maintainer_script to fail since that test expects
maintainers to be added. Set add_maintainer to True in the .patman config
to prevent this.
Fixes: 8c042fb7f9 ("patman: add '--get-maintainer-script' argument")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Simon GlassandTom Rini
Heinrich SchuchardtandTom Rini
Vincent StehléandSimon Glass
Ilias ApalodimasandSimon Glass
Quentin SchulzandSimon Glass
Brandon MaierandSimon Glass
Rasmus VillemoesandSimon Glass
Jonathan LiuandSimon Glass
Sean AndersonandSimon Glass