The AST2700 reuses the AST2600 watchdog block unchanged. Bind the
driver to the aspeed,ast2700-wdt compatible and enable WDT_AST2600
on the AST2700.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
Add a SDRAM controller driver for the AST2700, derived from the
existing AST2700 controller code used by the Ibex SPL but adapted
to run from ARM U-Boot proper on the Cortex-A35 cores.
The DDR4/DDR5 controller and its DesignWare PHY are programmed by
the Ibex SPL before ARM U-Boot proper takes over. This driver
reads back the configuration left by the SPL, probes the
controller, and exposes ram_info (base and size, with the VGA
carve-out subtracted) via UCLASS_RAM so that dram_init() can
populate gd->ram_size.
The PHY firmware-load entry points (dwc_ddrphy_phyinit_userCustom_*)
are kept compiled but call a __weak fmc_hdr_get_prebuilt() stub
when ARM U-Boot proper is the caller; the real implementation is
provided by the Ibex SPL via the same fmc_hdr.h descriptor format
(here added for the ARM build).
Adds the supporting register-layout headers under
arch/arm/include/asm/arch-aspeed/:
- sdram.h: SDRAM controller and DWC PHY register definitions
- scu.h: SCU bits referenced by the SDRAM driver
- fmc_hdr.h: prebuilt-blob descriptor (binary-compatible with
arch/riscv/include/asm/arch-ast2700/fmc_hdr.h used
by the Ibex SPL)
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Add reset controller driver for the dual-die AST2700 SoC. The
controller manages module-level reset signals via the modrst
register block at offset 0x200 within each SCU.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Add clock controller driver for the dual-die AST2700 SoC. The chip
has two SCUs (SoC0/CPU at 0x12c02000, SoC1/IO at 0x14c02000), each
with its own PLLs (HPLL/APLL/DPLL/MPLL), clock dividers and clock
gate controls. This commit registers two UCLASS_CLK drivers
matching "aspeed,ast2700-scu0" and "aspeed,ast2700-scu1".
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Add initial device tree support for the ASPEED AST27xx family, the
8th-generation Baseboard Management Controller (BMC) SoCs.
AST27xx SOC Family
- https://www.aspeedtech.com/server_ast2700/
- https://www.aspeedtech.com/server_ast2720/
- https://www.aspeedtech.com/server_ast2750/
The AST27xx features a dual-SoC architecture consisting of two ties,
referred to as SoC0 and SoC1 - interconnected through an internal
property bus. Both SoCs share the same address decoding scheme,
while each maintains independent clock and reset domains.
- SoC0 (CPU die): contains a dual-core Cortex-A35 cluster and two
Cortex-M4 cores, along with high-speed peripherals.
- SoC1 (I/O die): includes the BootMCU (responsible for system
boot) and its own clock/reset domains low-speed peripherals.
The device tree describes the SoC0 and SoC1 domains and their peripheral
layouts.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Add initial support for the ASPEED AST2700, an arm64 (Cortex-A35)
Baseboard Management Controller (BMC) SoC. AST2700 is Aspeed's 8th
generation BMC and uses a dual-die architecture: SoC0 (the "CPU"
die) hosts the four Cortex-A35 cores and its own SCU at 0x12c02000,
while SoC1 (the "IO" die) hosts the peripherals and its own SCU at
0x14c02000.
This commit adds:
- ASPEED_AST2700 Kconfig option and the ast2700 mach subdir
(mach Makefile, ast2700/Kconfig, board/aspeed/evb_ast2700/*)
- arm64 MMU map covering the SoC device window and the DRAM
region at 0x4_0000_0000 (up to 8 GiB)
- lowlevel_init.S for early CPU bring-up
- cpu-info: print SoC ID (AST2700/2720/2750 A0/A1/A2 variants)
and reset cause (cold reset, EXT reset, WDT reset)
- board_common: dram_init via UCLASS_RAM, AHBC timeout init
- platform: env_get_location() that selects SPI/eMMC based on
the IO-die HW strap; arch_misc_init() that exposes
${boot_device} and ${verify} to the boot script
- SCU0/SCU1 register layout header (scu_ast2700.h)
- configs/evb-ast2700_defconfig and include/configs/evb_ast2700.h
for the AST2700 EVB board
The defconfig depends on ast2700-evb.dts, which is introduced in
a subsequent patch; this commit must be applied with the
remaining series for evb-ast2700_defconfig to build.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
AST2700 is a 64-bit SoC whose flash AHB windows are decoded above
the 32-bit address space, so rework AHB addresses to uintptr_t and
decoded window sizes to size_t.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
The i2c driver have global register that i2c bus use
ofnode_get_parent to get parent register address.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Add i2c new register mode driver to support AST2600 i2c
new register mode. AST2600 i2c controller have legacy and
new register mode. The new register mode have global register
support 4 base clock for scl clock selection, and new clock
divider mode.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
v2: modify title description aspeed:clock -> clock:aspeed
Use kernel include/dt-bindings/clock/aspeed-clock.h define
for clock driver.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
Ryan ChenandStefan Roese
