p2041rdb: remove NAND defconfig

The RDB doesn't support NAND boot at all, remove the config for it.
Apparently, it was introduced by commit dd84058d24 ("kconfig: add
board Kconfig and defconfig files") which ran some scripts. Maybe that
script was wrong or the source boards.cfg was wrong. In any case, there
is no NAND flash on the RDB.

Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

configs/P2041RDB_NAND_defconfig

@@ -1,117 +0,0 @@
-CONFIG_PPC=y
-CONFIG_TEXT_BASE=0xFFF40000
-CONFIG_SYS_MALLOC_LEN=0x100000
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0xE0000
-CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
-CONFIG_SYS_MONITOR_LEN=786432
-CONFIG_MPC85xx=y
-CONFIG_SYS_INIT_RAM_LOCK=y
-CONFIG_SYS_SRIO=y
-CONFIG_SRIO1=y
-CONFIG_SRIO2=y
-CONFIG_SRIO_PCIE_BOOT_MASTER=y
-CONFIG_TARGET_P2041RDB=y
-CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
-CONFIG_ENABLE_36BIT_PHYS=y
-CONFIG_SYS_BOOK3E_HV=y
-CONFIG_SYS_CACHE_STASHING=y
-CONFIG_USE_UBOOTPATH=y
-CONFIG_PCIE1=y
-CONFIG_PCIE2=y
-CONFIG_PCIE3=y
-CONFIG_SYS_FSL_NUM_CC_PLLS=2
-CONFIG_MP=y
-CONFIG_DYNAMIC_SYS_CLK_FREQ=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_RAMBOOT_PBL=y
-CONFIG_SYS_FSL_PBL_PBI="board/nxp/p2041rdb/pbi.cfg"
-CONFIG_SYS_FSL_PBL_RCW="board/nxp/p2041rdb/rcw_p2041rdb.cfg"
-CONFIG_BOOTDELAY=10
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
-CONFIG_SYS_PBSIZE=276
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_ID_EEPROM=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_CMD_DM=y
-CONFIG_CMD_I2C=y
-CONFIG_LOADS_ECHO=y
-CONFIG_SYS_LOADS_BAUD_CHANGE=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_ENV_RELOC_GD_ENV_ADDR=y
-CONFIG_USE_BOOTFILE=y
-CONFIG_BOOTFILE="uImage"
-CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="FM1@DTSEC1"
-CONFIG_USE_ROOTPATH=y
-CONFIG_FSL_SATA_V2=y
-CONFIG_SYS_SATA_MAX_DEVICE=2
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_BR0_PRELIM_BOOL=y
-CONFIG_SYS_BR0_PRELIM=0xFFA00C21
-CONFIG_SYS_OR0_PRELIM=0xFFFC0796
-CONFIG_SYS_BR1_PRELIM_BOOL=y
-CONFIG_SYS_BR1_PRELIM=0xE8001001
-CONFIG_SYS_OR1_PRELIM=0xF8000F85
-CONFIG_SYS_BR3_PRELIM_BOOL=y
-CONFIG_SYS_BR3_PRELIM=0xFFDF0801
-CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
-CONFIG_DM_I2C=y
-CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_EMPTY_INFO=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_FLASH_QUIET_TEST=y
-CONFIG_SYS_MAX_FLASH_SECT=1024
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_FSL_ELBC=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_DM_MDIO=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_SYS_FMAN_FW_ADDR=0x100000
-CONFIG_MII=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PCIE_FSL=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_MAX_CONTROLLER_COUNT=2
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_POST=y