arm: dts: k3-am625*: Sync with kernel v6.7-rc1
Sync with kernel v6.7-rc1 and sync up the u-boot dts files accordingly. Tested-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
This commit is contained in:
Nishanth Menon
Tom Rini
@@ -81,7 +81,8 @@
|
||||
};
|
||||
|
||||
dmss: bus@48000000 {
|
||||
compatible = "simple-mfd";
|
||||
bootph-all;
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
dma-ranges;
|
||||
@@ -90,6 +91,7 @@
|
||||
ti,sci-dev-id = <25>;
|
||||
|
||||
secure_proxy_main: mailbox@4d000000 {
|
||||
bootph-all;
|
||||
compatible = "ti,am654-secure-proxy";
|
||||
#mbox-cells = <1>;
|
||||
reg-names = "target_data", "rt", "scfg";
|
||||
@@ -165,6 +167,7 @@
|
||||
};
|
||||
|
||||
dmsc: system-controller@44043000 {
|
||||
bootph-all;
|
||||
compatible = "ti,k2g-sci";
|
||||
ti,host-id = <12>;
|
||||
mbox-names = "rx", "tx";
|
||||
@@ -174,16 +177,19 @@
|
||||
reg = <0x00 0x44043000 0x00 0xfe0>;
|
||||
|
||||
k3_pds: power-controller {
|
||||
bootph-all;
|
||||
compatible = "ti,sci-pm-domain";
|
||||
#power-domain-cells = <2>;
|
||||
};
|
||||
|
||||
k3_clks: clock-controller {
|
||||
bootph-all;
|
||||
compatible = "ti,k2g-sci-clk";
|
||||
#clock-cells = <2>;
|
||||
};
|
||||
|
||||
k3_reset: reset-controller {
|
||||
bootph-all;
|
||||
compatible = "ti,sci-reset";
|
||||
#reset-cells = <2>;
|
||||
};
|
||||
@@ -202,6 +208,7 @@
|
||||
};
|
||||
|
||||
secure_proxy_sa3: mailbox@43600000 {
|
||||
bootph-pre-ram;
|
||||
compatible = "ti,am654-secure-proxy";
|
||||
#mbox-cells = <1>;
|
||||
reg-names = "target_data", "rt", "scfg";
|
||||
@@ -217,6 +224,7 @@
|
||||
};
|
||||
|
||||
main_pmx0: pinctrl@f4000 {
|
||||
bootph-all;
|
||||
compatible = "pinctrl-single";
|
||||
reg = <0x00 0xf4000 0x00 0x2ac>;
|
||||
#pinctrl-cells = <1>;
|
||||
@@ -225,12 +233,14 @@
|
||||
};
|
||||
|
||||
main_esm: esm@420000 {
|
||||
bootph-pre-ram;
|
||||
compatible = "ti,j721e-esm";
|
||||
reg = <0x00 0x420000 0x00 0x1000>;
|
||||
ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
|
||||
};
|
||||
|
||||
main_timer0: timer@2400000 {
|
||||
bootph-all;
|
||||
compatible = "ti,am654-timer";
|
||||
reg = <0x00 0x2400000 0x00 0x400>;
|
||||
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@@ -7,6 +7,7 @@
|
||||
|
||||
&cbass_mcu {
|
||||
mcu_pmx0: pinctrl@4084000 {
|
||||
bootph-all;
|
||||
compatible = "pinctrl-single";
|
||||
reg = <0x00 0x04084000 0x00 0x88>;
|
||||
#pinctrl-cells = <1>;
|
||||
@@ -15,6 +16,7 @@
|
||||
};
|
||||
|
||||
mcu_esm: esm@4100000 {
|
||||
bootph-pre-ram;
|
||||
compatible = "ti,j721e-esm";
|
||||
reg = <0x00 0x4100000 0x00 0x1000>;
|
||||
ti,esm-pins = <0>, <1>, <2>, <85>;
|
||||
|
||||
@@ -35,5 +35,11 @@
|
||||
&main_uart5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart5>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "nxp,88w8987-bt";
|
||||
fw-init-baudrate = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -1061,6 +1061,7 @@
|
||||
vddc-supply = <®_1v2_dsi>;
|
||||
vddmipi-supply = <®_1v2_dsi>;
|
||||
vddio-supply = <®_1v8_dsi>;
|
||||
status = "disabled";
|
||||
|
||||
dsi_bridge_ports: ports {
|
||||
#address-cells = <1>;
|
||||
|
||||
@@ -7,6 +7,7 @@
|
||||
|
||||
&cbass_wakeup {
|
||||
wkup_conf: syscon@43000000 {
|
||||
bootph-all;
|
||||
compatible = "syscon", "simple-mfd";
|
||||
reg = <0x00 0x43000000 0x00 0x20000>;
|
||||
#address-cells = <1>;
|
||||
@@ -14,6 +15,7 @@
|
||||
ranges = <0x0 0x00 0x43000000 0x20000>;
|
||||
|
||||
chipid: chipid@14 {
|
||||
bootph-all;
|
||||
compatible = "ti,am654-chipid";
|
||||
reg = <0x14 0x4>;
|
||||
};
|
||||
|
||||
@@ -47,6 +47,7 @@
|
||||
};
|
||||
|
||||
cbass_main: bus@f0000 {
|
||||
bootph-all;
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
@@ -86,6 +87,7 @@
|
||||
<0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
|
||||
|
||||
cbass_mcu: bus@4000000 {
|
||||
bootph-all;
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
@@ -93,6 +95,7 @@
|
||||
};
|
||||
|
||||
cbass_wakeup: bus@b00000 {
|
||||
bootph-all;
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
@@ -46,6 +46,7 @@
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
bootph-pre-ram;
|
||||
device_type = "memory";
|
||||
/* 2G RAM */
|
||||
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
|
||||
@@ -58,7 +59,7 @@
|
||||
|
||||
ramoops: ramoops@9ca00000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0x00 0x9c700000 0x00 0x00100000>;
|
||||
reg = <0x00 0x9ca00000 0x00 0x00100000>;
|
||||
record-size = <0x8000>;
|
||||
console-size = <0x8000>;
|
||||
ftrace-size = <0x00>;
|
||||
@@ -83,6 +84,7 @@
|
||||
};
|
||||
|
||||
vsys_5v0: regulator-1 {
|
||||
bootph-all;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vsys_5v0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
@@ -93,6 +95,7 @@
|
||||
|
||||
vdd_3v3: regulator-2 {
|
||||
/* output of TLV62595DMQR-U12 */
|
||||
bootph-all;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
@@ -118,6 +121,7 @@
|
||||
|
||||
vdd_3v3_sd: regulator-4 {
|
||||
/* output of TPS22918DBVR-U21 */
|
||||
bootph-all;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vdd_3v3_sd_pins_default>;
|
||||
|
||||
@@ -132,6 +136,7 @@
|
||||
};
|
||||
|
||||
vdd_sd_dv: regulator-5 {
|
||||
bootph-all;
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "sd_hs200_switch";
|
||||
pinctrl-names = "default";
|
||||
@@ -146,9 +151,11 @@
|
||||
};
|
||||
|
||||
leds {
|
||||
bootph-all;
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
bootph-all;
|
||||
gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
@@ -156,6 +163,7 @@
|
||||
};
|
||||
|
||||
led-1 {
|
||||
bootph-all;
|
||||
gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "disk-activity";
|
||||
function = LED_FUNCTION_DISK_ACTIVITY;
|
||||
@@ -163,16 +171,19 @@
|
||||
};
|
||||
|
||||
led-2 {
|
||||
bootph-all;
|
||||
gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
|
||||
function = LED_FUNCTION_CPU;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
bootph-all;
|
||||
gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
};
|
||||
|
||||
led-4 {
|
||||
bootph-all;
|
||||
gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
|
||||
function = LED_FUNCTION_WLAN;
|
||||
};
|
||||
@@ -245,6 +256,7 @@
|
||||
|
||||
&main_pmx0 {
|
||||
gpio0_pins_default: gpio0-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
|
||||
AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
|
||||
@@ -264,6 +276,7 @@
|
||||
};
|
||||
|
||||
vdd_sd_dv_pins_default: vdd-sd-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
|
||||
>;
|
||||
@@ -283,6 +296,7 @@
|
||||
};
|
||||
|
||||
local_i2c_pins_default: local-i2c-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
|
||||
AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
|
||||
@@ -321,6 +335,7 @@
|
||||
};
|
||||
|
||||
emmc_pins_default: emmc-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
|
||||
AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
|
||||
@@ -336,12 +351,14 @@
|
||||
};
|
||||
|
||||
vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
|
||||
>;
|
||||
};
|
||||
|
||||
sd_pins_default: sd-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
|
||||
AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
|
||||
@@ -418,6 +435,7 @@
|
||||
};
|
||||
|
||||
mikrobus_gpio_pins_default: mikrobus-gpio-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */
|
||||
AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */
|
||||
@@ -426,6 +444,7 @@
|
||||
};
|
||||
|
||||
console_pins_default: console-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
|
||||
AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
|
||||
@@ -597,6 +616,7 @@
|
||||
};
|
||||
|
||||
&main_gpio0 {
|
||||
bootph-all;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio0_pins_default>;
|
||||
gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT", /* 0-2 */
|
||||
@@ -616,6 +636,7 @@
|
||||
};
|
||||
|
||||
&main_gpio1 {
|
||||
bootph-all;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mikrobus_gpio_pins_default>;
|
||||
gpio-line-names = "", "", "", "", "", /* 0-4 */
|
||||
@@ -633,6 +654,7 @@
|
||||
};
|
||||
|
||||
&main_i2c0 {
|
||||
bootph-all;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&local_i2c_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
@@ -651,6 +673,7 @@
|
||||
};
|
||||
|
||||
tps65219: pmic@30 {
|
||||
bootph-all;
|
||||
compatible = "ti,tps65219";
|
||||
reg = <0x30>;
|
||||
buck1-supply = <&vsys_5v0>;
|
||||
@@ -801,6 +824,7 @@
|
||||
};
|
||||
|
||||
&sdhci0 {
|
||||
bootph-all;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_pins_default>;
|
||||
ti,driver-strength-ohm = <50>;
|
||||
@@ -810,6 +834,7 @@
|
||||
|
||||
&sdhci1 {
|
||||
/* SD/MMC */
|
||||
bootph-all;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd_pins_default>;
|
||||
|
||||
@@ -850,6 +875,7 @@
|
||||
};
|
||||
|
||||
&main_uart0 {
|
||||
bootph-all;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&console_pins_default>;
|
||||
status = "okay";
|
||||
@@ -870,6 +896,12 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_debug_uart_pins_default>;
|
||||
status = "okay";
|
||||
|
||||
mcu {
|
||||
compatible = "ti,cc1352p7";
|
||||
reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>;
|
||||
vdds-supply = <&vdd_3v3>;
|
||||
};
|
||||
};
|
||||
|
||||
&dss {
|
||||
|
||||
@@ -31,6 +31,7 @@
|
||||
|
||||
vmain_pd: regulator-0 {
|
||||
/* TPS65988 PD CONTROLLER OUTPUT */
|
||||
bootph-all;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmain_pd";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
@@ -41,6 +42,7 @@
|
||||
|
||||
vcc_5v0: regulator-1 {
|
||||
/* Output of LM34936 */
|
||||
bootph-all;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_5v0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
@@ -52,6 +54,7 @@
|
||||
|
||||
vcc_3v3_sys: regulator-2 {
|
||||
/* output of LM61460-Q1 */
|
||||
bootph-all;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_3v3_sys";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
@@ -63,6 +66,7 @@
|
||||
|
||||
vdd_mmc1: regulator-3 {
|
||||
/* TPS22918DBVR */
|
||||
bootph-all;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_mmc1";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
@@ -75,6 +79,7 @@
|
||||
|
||||
vdd_sd_dv: regulator-4 {
|
||||
/* Output of TLV71033 */
|
||||
bootph-all;
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "tlv71033";
|
||||
pinctrl-names = "default";
|
||||
@@ -102,6 +107,7 @@
|
||||
|
||||
&main_pmx0 {
|
||||
main_rgmii2_pins_default: main-rgmii2-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
|
||||
AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
|
||||
@@ -119,6 +125,7 @@
|
||||
};
|
||||
|
||||
ospi0_pins_default: ospi0-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
|
||||
AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
|
||||
@@ -135,20 +142,32 @@
|
||||
};
|
||||
|
||||
vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
|
||||
>;
|
||||
};
|
||||
|
||||
main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&main_gpio0 {
|
||||
bootph-all;
|
||||
};
|
||||
|
||||
&main_gpio1 {
|
||||
bootph-all;
|
||||
};
|
||||
|
||||
&main_i2c1 {
|
||||
bootph-all;
|
||||
exp1: gpio@22 {
|
||||
bootph-all;
|
||||
compatible = "ti,tca6424";
|
||||
reg = <0x22>;
|
||||
gpio-controller;
|
||||
@@ -207,12 +226,18 @@
|
||||
};
|
||||
};
|
||||
|
||||
&fss {
|
||||
bootph-all;
|
||||
};
|
||||
|
||||
&ospi0 {
|
||||
bootph-all;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ospi0_pins_default>;
|
||||
|
||||
flash@0 {
|
||||
bootph-all;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
spi-tx-bus-width = <8>;
|
||||
@@ -225,6 +250,7 @@
|
||||
cdns,read-delay = <4>;
|
||||
|
||||
partitions {
|
||||
bootph-all;
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
@@ -260,6 +286,7 @@
|
||||
};
|
||||
|
||||
partition@3fc0000 {
|
||||
bootph-pre-ram;
|
||||
label = "ospi.phypattern";
|
||||
reg = <0x3fc0000 0x40000>;
|
||||
};
|
||||
|
||||
@@ -28,6 +28,7 @@
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
bootph-pre-ram;
|
||||
device_type = "memory";
|
||||
/* 2G RAM */
|
||||
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
|
||||
@@ -114,11 +115,23 @@
|
||||
clocks = <&tlv320_mclk>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi0: connector-hdmi {
|
||||
compatible = "hdmi-connector";
|
||||
label = "hdmi";
|
||||
type = "a";
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&sii9022_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&main_pmx0 {
|
||||
/* First pad number is ALW package and second is AMC package */
|
||||
main_uart0_pins_default: main-uart0-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */
|
||||
AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */
|
||||
@@ -126,6 +139,7 @@
|
||||
};
|
||||
|
||||
main_uart1_pins_default: main-uart1-default-pins {
|
||||
bootph-pre-ram;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */
|
||||
AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */
|
||||
@@ -156,6 +170,7 @@
|
||||
};
|
||||
|
||||
main_mmc0_pins_default: main-mmc0-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
|
||||
AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
|
||||
@@ -171,6 +186,7 @@
|
||||
};
|
||||
|
||||
main_mmc1_pins_default: main-mmc1-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
|
||||
AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
|
||||
@@ -196,6 +212,7 @@
|
||||
};
|
||||
|
||||
main_rgmii1_pins_default: main-rgmii1-default-pins {
|
||||
bootph-all;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */
|
||||
AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */
|
||||
@@ -226,10 +243,44 @@
|
||||
AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23/K20) GPMC0_ADVN_ALE.MCASP1_AXR2 */
|
||||
>;
|
||||
};
|
||||
|
||||
main_dss0_pins_default: main-dss0-default-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
|
||||
AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
|
||||
AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
|
||||
AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
|
||||
AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
|
||||
AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
|
||||
AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
|
||||
AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
|
||||
AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
|
||||
AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
|
||||
AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
|
||||
AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
|
||||
AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
|
||||
AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
|
||||
AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
|
||||
AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
|
||||
AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
|
||||
AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
|
||||
AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
|
||||
AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
|
||||
AM62X_IOPAD(0x05c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
|
||||
AM62X_IOPAD(0x060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
|
||||
AM62X_IOPAD(0x064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
|
||||
AM62X_IOPAD(0x068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
|
||||
AM62X_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
|
||||
AM62X_IOPAD(0x070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
|
||||
AM62X_IOPAD(0x074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
|
||||
AM62X_IOPAD(0x078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&mcu_pmx0 {
|
||||
wkup_uart0_pins_default: wkup-uart0-default-pins {
|
||||
bootph-pre-ram;
|
||||
pinctrl-single,pins = <
|
||||
AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6/A7) WKUP_UART0_CTSn */
|
||||
AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4/B4) WKUP_UART0_RTSn */
|
||||
@@ -241,12 +292,14 @@
|
||||
|
||||
&wkup_uart0 {
|
||||
/* WKUP UART0 is used by DM firmware */
|
||||
bootph-pre-ram;
|
||||
status = "reserved";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wkup_uart0_pins_default>;
|
||||
};
|
||||
|
||||
&main_uart0 {
|
||||
bootph-all;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_uart0_pins_default>;
|
||||
@@ -254,6 +307,7 @@
|
||||
|
||||
&main_uart1 {
|
||||
/* Main UART1 is used by TIFS firmware */
|
||||
bootph-pre-ram;
|
||||
status = "reserved";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_uart1_pins_default>;
|
||||
@@ -300,7 +354,7 @@
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_i2c1_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
clock-frequency = <100000>;
|
||||
|
||||
tlv320aic3106: audio-codec@1b {
|
||||
#sound-dai-cells = <0>;
|
||||
@@ -313,9 +367,40 @@
|
||||
IOVDD-supply = <&vcc_3v3_sys>;
|
||||
DRVDD-supply = <&vcc_3v3_sys>;
|
||||
};
|
||||
|
||||
sii9022: bridge-hdmi@3b {
|
||||
compatible = "sil,sii9022";
|
||||
reg = <0x3b>;
|
||||
interrupt-parent = <&exp1>;
|
||||
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
|
||||
#sound-dai-cells = <0>;
|
||||
sil,i2s-data-lanes = < 0 >;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
sii9022_in: endpoint {
|
||||
remote-endpoint = <&dpi1_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
sii9022_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci0 {
|
||||
bootph-all;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_mmc0_pins_default>;
|
||||
@@ -325,6 +410,7 @@
|
||||
|
||||
&sdhci1 {
|
||||
/* SD/MMC */
|
||||
bootph-all;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_mmc1_pins_default>;
|
||||
@@ -333,21 +419,25 @@
|
||||
};
|
||||
|
||||
&cpsw3g {
|
||||
bootph-all;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_rgmii1_pins_default>;
|
||||
};
|
||||
|
||||
&cpsw_port1 {
|
||||
bootph-all;
|
||||
phy-mode = "rgmii-rxid";
|
||||
phy-handle = <&cpsw3g_phy0>;
|
||||
};
|
||||
|
||||
&cpsw3g_mdio {
|
||||
bootph-all;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_mdio1_pins_default>;
|
||||
|
||||
cpsw3g_phy0: ethernet-phy@0 {
|
||||
bootph-all;
|
||||
reg = <0>;
|
||||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
||||
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
||||
@@ -410,3 +500,20 @@
|
||||
tx-num-evt = <32>;
|
||||
rx-num-evt = <32>;
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_dss0_pins_default>;
|
||||
};
|
||||
|
||||
&dss_ports {
|
||||
/* VP2: DPI Output */
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
dpi1_out: endpoint {
|
||||
remote-endpoint = <&sii9022_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
Reference in New Issue
Block a user