vhaudiquet/u-boot-krane
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge tag 'u-boot-stm32-20241112' of https://source.denx.de/u-boot/custodians/u-boot-stm

Browse Source 
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/23296

- Deduplicate DH STM32MP1xx DHSOM and DHCOR defconfigs
- Fixes STM32MP1xx DHSOM and DHCOR device trees
- Add support of manufacturing environment to STM32MP15xx DHSOM
This commit is contained in:
Tom Rini
2024-11-12 13:40:29 -06:00
parent cca05617a8 f9cfc47a83
commit 9f538624fc
10 changed files with 222 additions and 879 deletions
Download Patch File Download Diff File Expand all files Collapse all files
arch/arm/dts/stm32mp13xx-dhcor-som.dtsi
-308
View File
@@ -1,308 +0,0 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) 2024 Marek Vasut <marex@denx.de>
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/mfd/st,stpmic1.h>
#include <dt-bindings/regulator/st,stm32mp13-regulator.h>
#include "stm32mp13-pinctrl.dtsi"
/ {
model = "DH electronics STM32MP13xx DHCOR SoM";
compatible = "dh,stm32mp131a-dhcor-som",
"st,stm32mp131";
aliases {
mmc0 = &sdmmc2;
mmc1 = &sdmmc1;
serial0 = &uart4;
serial1 = &uart7;
rtc0 = &rv3032;
spi0 = &qspi;
};
memory@c0000000 {
device_type = "memory";
reg = <0xc0000000 0x20000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
optee@dd000000 {
reg = <0xdd000000 0x3000000>;
no-map;
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpiof 12 GPIO_ACTIVE_LOW>;
};
vin: vin {
compatible = "regulator-fixed";
regulator-name = "vin";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
};
&i2c3 {
i2c-scl-rising-time-ns = <96>;
i2c-scl-falling-time-ns = <3>;
clock-frequency = <400000>;
status = "okay";
/* spare dmas for other usage */
/delete-property/dmas;
/delete-property/dma-names;
pmic: stpmic@33 {
compatible = "st,stpmic1";
reg = <0x33>;
interrupts-extended = <&gpioi 3 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
status = "okay";
regulators {
compatible = "st,stpmic1-regulators";
ldo1-supply = <&vin>;
ldo2-supply = <&vin>;
ldo3-supply = <&vin>;
ldo4-supply = <&vin>;
ldo5-supply = <&vin>;
ldo6-supply = <&vin>;
pwr_sw1-supply = <&bst_out>;
pwr_sw2-supply = <&bst_out>;
vddcpu: buck1 { /* VDD_CPU_1V2 */
regulator-name = "vddcpu";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-over-current-protection;
};
vdd_ddr: buck2 { /* VDD_DDR_1V35 */
regulator-name = "vdd_ddr";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-over-current-protection;
};
vdd: buck3 { /* VDD_3V3_1V8 */
regulator-name = "vdd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-over-current-protection;
};
vddcore: buck4 { /* VDD_CORE_1V2 */
regulator-name = "vddcore";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-over-current-protection;
};
vdd_adc: ldo1 { /* VDD_ADC_1V8 */
regulator-name = "vdd_adc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
interrupts = <IT_CURLIM_LDO1 0>;
};
vdd_ldo2: ldo2 { /* LDO2_OUT_1V8 */
regulator-name = "vdd_ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
interrupts = <IT_CURLIM_LDO2 0>;
};
vdd_ldo3: ldo3 { /* LDO3_OUT */
regulator-name = "vdd_ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
interrupts = <IT_CURLIM_LDO3 0>;
};
vdd_usb: ldo4 { /* VDD_USB_3V3 */
regulator-name = "vdd_usb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
vdd_sd: ldo5 { /* VDD_SD_3V3_1V8 */
regulator-name = "vdd_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO5 0>;
};
vdd_sd2: ldo6 { /* VDD_SD2_3V3_1V8 */
regulator-name = "vdd_sd2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO6 0>;
};
vref_ddr: vref_ddr { /* VREF_DDR_0V675 */
regulator-name = "vref_ddr";
regulator-always-on;
};
bst_out: boost { /* BST_OUT_5V2 */
regulator-name = "bst_out";
};
vbus_otg: pwr_sw1 {
regulator-name = "vbus_otg";
interrupts = <IT_OCP_OTG 0>;
};
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
regulator-active-discharge = <1>;
};
};
onkey {
compatible = "st,stpmic1-onkey";
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
interrupt-names = "onkey-falling", "onkey-rising";
status = "okay";
};
watchdog {
compatible = "st,stpmic1-wdt";
status = "disabled";
};
};
eeprom0: eeprom@50 {
compatible = "atmel,24c256"; /* ST M24256 */
reg = <0x50>;
pagesize = <64>;
};
rv3032: rtc@51 {
compatible = "microcrystal,rv3032";
reg = <0x51>;
interrupts-extended = <&gpioi 0 IRQ_TYPE_EDGE_FALLING>;
};
};
&iwdg2 {
timeout-sec = <32>;
status = "okay";
};
&qspi {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&qspi_clk_pins_a
&qspi_bk1_pins_a
&qspi_cs1_pins_a>;
pinctrl-1 = <&qspi_clk_sleep_pins_a
&qspi_bk1_sleep_pins_a
&qspi_cs1_sleep_pins_a>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>;
#address-cells = <1>;
#size-cells = <1>;
};
};
/* Console UART */
&uart4 {
pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&uart4_pins_b>;
pinctrl-1 = <&uart4_sleep_pins_b>;
pinctrl-2 = <&uart4_idle_pins_b>;
/delete-property/dmas;
/delete-property/dma-names;
status = "okay";
};
/* Bluetooth */
&uart7 {
pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&uart7_pins_a>;
pinctrl-1 = <&uart7_sleep_pins_a>;
pinctrl-2 = <&uart7_idle_pins_a>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt";
max-speed = <3000000>;
device-wakeup-gpios = <&gpiog 9 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>;
};
};
/* SDIO WiFi */
&sdmmc1 {
pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
bus-width = <4>;
cap-power-off-card;
keep-power-in-suspend;
non-removable;
st,neg-edge;
vmmc-supply = <&vdd>;
mmc-pwrseq = <&sdio_pwrseq>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
brcmf: bcrmf@1 { /* muRata 1YN */
reg = <1>;
compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac";
interrupt-parent = <&gpioe>;
interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "host-wake";
};
};
/* eMMC */
&sdmmc2 {
pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
bus-width = <8>;
mmc-ddr-3_3v;
no-sd;
no-sdio;
non-removable;
st,neg-edge;
vmmc-supply = <&vdd>;
vqmmc-supply = <&vdd>;
status = "okay";
};
arch/arm/dts/stm32mp153c-dhcor-drc-compact.dts
-30
View File
@@ -1,30 +0,0 @@
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
/*
* Copyright (C) 2022 Marek Vasut <marex@denx.de>
*
* DHCOR STM32MP1 variant:
* DHCR-STM32MP153C-C065-R051-V33-SPI-I-01LG
* DHCOR PCB number: 586-100 or newer
* DRC Compact PCB number: 627-100 or newer
*/
/dts-v1/;
#include "stm32mp153.dtsi"
#include "stm32mp15xc.dtsi"
#include "stm32mp15xx-dhcor-som.dtsi"
#include "stm32mp15xx-dhcor-drc-compact.dtsi"
/ {
model = "DH electronics STM32MP153C DHCOR DRC Compact";
compatible = "dh,stm32mp153c-dhcor-drc-compact",
"dh,stm32mp153c-dhcor-som",
"st,stm32mp153";
};
&m_can1 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&m_can1_pins_c>;
pinctrl-1 = <&m_can1_sleep_pins_c>;
status = "okay";
};
arch/arm/dts/stm32mp157a-dhcor-avenger96.dts
-38
View File
@@ -1,38 +0,0 @@
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
/*
* Copyright (C) Linaro Ltd 2019 - All Rights Reserved
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
* Copyright (C) 2020 Marek Vasut <marex@denx.de>
*
* DHCOR STM32MP1 variant:
* DHCR-STM32MP157A-C065-R102-V18-SPI-C-01LG
* DHCOR PCB number: 586-100 or newer
* Avenger96 PCB number: 588-200 or newer
*/
/dts-v1/;
#include "stm32mp157.dtsi"
#include "stm32mp15xc.dtsi"
#include "stm32mp15xx-dhcor-som.dtsi"
#include "stm32mp15xx-dhcor-avenger96.dtsi"
/ {
model = "Arrow Electronics STM32MP157A Avenger96 board";
compatible = "arrow,stm32mp157a-avenger96", "dh,stm32mp157a-dhcor-som",
"st,stm32mp157";
};
&m_can1 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&m_can1_pins_b>;
pinctrl-1 = <&m_can1_sleep_pins_b>;
status = "disabled";
};
&m_can2 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&m_can2_pins_a>;
pinctrl-1 = <&m_can2_sleep_pins_a>;
status = "disabled";
};
arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+25 -53
View File
@@ -12,6 +12,7 @@
/ {
aliases {
eeprom0 = &eeprom0;
i2c1 = &i2c2;
i2c3 = &i2c4;
i2c4 = &i2c5;
@@ -19,15 +20,14 @@
mmc1 = &sdmmc2;
spi0 = &qspi;
usb0 = &usbotg_hs;
eeprom0 = &eeprom0;
};
config {
u-boot,boot-led = "heartbeat";
u-boot,error-led = "error";
dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>;
dh,ddr3-coding-gpios = <&gpioz 6 0>, <&gpioz 7 0>;
dh,mac-coding-gpios = <&gpioc 3 0>;
dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>;
u-boot,boot-led = "heartbeat";
u-boot,error-led = "error";
};
};
@@ -36,17 +36,6 @@
/delete-property/ st,eth-ref-clk-sel;
};
&ethernet0_rmii_pins_a {
pins1 {
pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
<STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
<STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
<STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK */
<STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */
<STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */
};
};
&i2c4 {
bootph-all;
bootph-pre-ram;
@@ -62,36 +51,6 @@
};
};
&phy0 {
/delete-property/ reset-gpios;
};
&pinctrl {
mco2_pins_a: mco2-0 {
pins {
pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
mco2_sleep_pins_a: mco2-sleep-0 {
pins {
pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */
};
};
};
&pmic {
bootph-all;
bootph-pre-ram;
regulators {
bootph-pre-ram;
};
};
&flash0 {
bootph-pre-ram;
@@ -123,6 +82,19 @@
};
};
&phy0 {
/delete-property/ reset-gpios;
};
&pmic {
bootph-all;
bootph-pre-ram;
regulators {
bootph-pre-ram;
};
};
&qspi {
bootph-pre-ram;
};
@@ -269,6 +241,14 @@
};
};
&reg11 {
bootph-pre-ram;
};
&reg18 {
bootph-pre-ram;
};
&sdmmc1 {
bootph-pre-ram;
st,use-ckin;
@@ -331,14 +311,6 @@
};
};
&reg11 {
bootph-pre-ram;
};
&reg18 {
bootph-pre-ram;
};
&usb33 {
bootph-pre-ram;
};
configs/stm32mp13_dhcor_defconfig
+2 -105
View File
@@ -1,149 +1,46 @@
#include <configs/stm32mp_dhsom.config>
CONFIG_ARM=y
CONFIG_ARCH_STM32MP=y
CONFIG_TFABOOT=y
CONFIG_SYS_MALLOC_F_LEN=0x1c0000
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0400000
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x3E0000
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="st/stm32mp135f-dhcor-dhsbc"
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_STM32MP13X=y
CONFIG_DDR_CACHEABLE_SIZE=0x8000000
CONFIG_CMD_STM32KEY=y
CONFIG_TARGET_ST_STM32MP13X=y
CONFIG_ENV_OFFSET_REDUND=0x3F0000
CONFIG_CMD_STM32PROG=y
CONFIG_STM32MP15_PWR=y
# CONFIG_ARMV7_NONSEC is not set
CONFIG_SYS_MEMTEST_START=0xc0000000
CONFIG_SYS_MEMTEST_END=0xc4000000
# CONFIG_EFI_LOADER is not set
CONFIG_FIT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTSTAGE_RECORD_COUNT=100
CONFIG_BOOTDELAY=3
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_PROMPT="STM32MP> "
# CONFIG_CMD_ELF is not set
CONFIG_CMD_ASKENV=y
# CONFIG_CMD_EXPORTENV is not set
CONFIG_CMD_ERASEENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_UNZIP=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_LSBLK=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_CAT=y
CONFIG_CMD_SETEXPR_FMT=y
CONFIG_CMD_XXD=y
CONFIG_CMD_DHCP6=y
CONFIG_CMD_TFTPPUT=y
CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_WGET=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_RNG=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_BTRFS=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_LOG=y
CONFIG_CMD_UBI=y
# CONFIG_ISO_PARTITION is not set
CONFIG_OF_LIVE=y
CONFIG_OF_UPSTREAM=y
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_IP_DEFRAG=y
CONFIG_TFTP_TSIZE=y
CONFIG_PROT_TCP_SACK=y
CONFIG_IPV6=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
CONFIG_CLK_SCMI=y
CONFIG_SET_DFU_ALT_INFO=y
CONFIG_GPIO_HOG=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_STM32F7=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_STM32_FMC2_EBI=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_STM32_SDMMC2=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_REALTEK=y
CONFIG_DWC_ETH_QOS=y
CONFIG_PHY=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PINCONF=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_STPMIC1=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_REGULATOR_STPMIC1=y
CONFIG_DM_REGULATOR_SCMI=y
CONFIG_RESET_SCMI=y
CONFIG_DM_RNG=y
CONFIG_RNG_STM32=y
CONFIG_DM_RTC=y
CONFIG_RTC_STM32=y
CONFIG_SERIAL_RX_BUFFER=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_STM32_QSPI=y
CONFIG_STM32_SPI=y
CONFIG_SYSRESET_PSCI=y
CONFIG_TEE=y
CONFIG_OPTEE=y
# CONFIG_OPTEE_TA_AVB is not set
CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC2=y
CONFIG_USB_ONBOARD_HUB=y
CONFIG_USB_HUB_DEBOUNCE_TIMEOUT=2000
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="dh"
CONFIG_USB_GADGET_VENDOR_NUM=0x0483
CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_WDT=y
CONFIG_WDT_STM32MP=y
CONFIG_FAT_WRITE=y
CONFIG_ERRNO_STR=y
configs/stm32mp15_dhcom_basic_defconfig
+2 -172
View File
@@ -1,181 +1,11 @@
#include <configs/stm32mp15_dhsom.config>
CONFIG_ARM=y
CONFIG_ARCH_STM32MP=y
CONFIG_SYS_MALLOC_F_LEN=0x3000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000
CONFIG_SF_DEFAULT_SPEED=50000000
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="st/stm32mp157c-dhcom-pdk2"
CONFIG_SPL_TEXT_BASE=0x2FFC2500
CONFIG_SPL_MMC=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C
CONFIG_SPL_STACK=0x30000000
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_SPL=y
CONFIG_CMD_STM32KEY=y
CONFIG_CMD_STBOARD=y
CONFIG_TARGET_DH_STM32MP1_PDK2=y
CONFIG_CMD_STM32PROG=y
CONFIG_CMD_STM32PROG_OTP=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_ARMV7_VIRT is not set
CONFIG_SYS_MEMTEST_START=0xc0000000
CONFIG_SYS_MEMTEST_END=0xc4000000
CONFIG_HAS_BOARD_SIZE_LIMIT=y
CONFIG_BOARD_SIZE_LIMIT=1441792
# CONFIG_EFI_LOADER is not set
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0xc1000000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_SYS_PBSIZE=1050
CONFIG_CONSOLE_MUX=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x3db00
CONFIG_SPL_BOOTCOUNT_LIMIT=y
CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MTD=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_POWER=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_SPI_FLASH_MTD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
CONFIG_SYS_PROMPT="STM32MP> "
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_EXPORTENV is not set
CONFIG_CMD_EEPROM=y
CONFIG_SYS_I2C_EEPROM_BUS=3
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_UNZIP=y
CONFIG_CMD_ADC=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REMOTEPROC=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_DHCP6=y
CONFIG_CMD_TFTPPUT=y
CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_WGET=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_BTRFS=y
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_ISO_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_OF_LIVE=y
CONFIG_OF_UPSTREAM=y
CONFIG_OF_LIST="st/stm32mp157c-dhcom-pdk2 st/stm32mp153c-dhcom-drc02 st/stm32mp157c-dhcom-picoitx"
CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SPL_ENV_IS_NOWHERE=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_IP_DEFRAG=y
CONFIG_TFTP_TSIZE=y
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.1.1"
CONFIG_PROT_TCP_SACK=y
CONFIG_IPV6=y
CONFIG_STM32_ADC=y
CONFIG_SPL_BLOCK_CACHE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
CONFIG_GPIO_HOG=y
CONFIG_DM_HWSPINLOCK=y
CONFIG_HWSPINLOCK_STM32=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_STM32F7=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_STM32_FMC2_EBI=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_STM32_SDMMC2=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_ANEG_TIMEOUT=20000
CONFIG_DWC_ETH_QOS=y
CONFIG_KS8851_MLL=y
CONFIG_PHY=y
CONFIG_SPL_PHY=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PINCONF=y
# CONFIG_SPL_PINCTRL_FULL is not set
CONFIG_PINCTRL_STMFX=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_STPMIC1=y
CONFIG_DM_REGULATOR=y
CONFIG_SPL_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_REGULATOR_STM32_VREFBUF=y
CONFIG_DM_REGULATOR_STPMIC1=y
CONFIG_SPL_DM_REGULATOR_STPMIC1=y
CONFIG_REMOTEPROC_STM32_COPRO=y
CONFIG_DM_RTC=y
CONFIG_RTC_STM32=y
CONFIG_SERIAL_RX_BUFFER=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_STM32_QSPI=y
CONFIG_STM32_SPI=y
CONFIG_SYSRESET_SYSCON=y
CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_SPL_DM_USB_GADGET=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC2=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_GADGET=y
CONFIG_SPL_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="dh"
CONFIG_USB_GADGET_VENDOR_NUM=0x0483
CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_SPL_DFU=y
CONFIG_WDT=y
CONFIG_WDT_STM32MP=y
CONFIG_FAT_WRITE=y
# CONFIG_BINMAN_FDT is not set
configs/stm32mp15_dhcor_basic_defconfig
+2 -172
View File
@@ -1,181 +1,11 @@
#include <configs/stm32mp15_dhsom.config>
CONFIG_ARM=y
CONFIG_ARCH_STM32MP=y
CONFIG_SYS_MALLOC_F_LEN=0x3000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000
CONFIG_SF_DEFAULT_SPEED=50000000
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="st/stm32mp157a-dhcor-avenger96"
CONFIG_SPL_TEXT_BASE=0x2FFC2500
CONFIG_SPL_MMC=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C
CONFIG_SPL_STACK=0x30000000
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_SPL=y
CONFIG_CMD_STM32KEY=y
CONFIG_CMD_STBOARD=y
CONFIG_TARGET_DH_STM32MP1_PDK2=y
CONFIG_CMD_STM32PROG=y
CONFIG_CMD_STM32PROG_OTP=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_ARMV7_VIRT is not set
CONFIG_HAS_BOARD_SIZE_LIMIT=y
CONFIG_BOARD_SIZE_LIMIT=1441792
# CONFIG_EFI_LOADER is not set
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0xc1000000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_SYS_PBSIZE=1050
CONFIG_CONSOLE_MUX=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x3db00
CONFIG_SPL_BOOTCOUNT_LIMIT=y
CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MTD=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_POWER=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_SPI_FLASH_MTD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
CONFIG_SYS_PROMPT="STM32MP> "
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_EXPORTENV is not set
CONFIG_CMD_EEPROM=y
CONFIG_SYS_I2C_EEPROM_BUS=2
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_UNZIP=y
CONFIG_CMD_ADC=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REMOTEPROC=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_DHCP6=y
CONFIG_CMD_TFTPPUT=y
CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_WGET=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_BTRFS=y
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_ISO_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_OF_LIVE=y
CONFIG_OF_UPSTREAM=y
CONFIG_OF_LIST="st/stm32mp157a-dhcor-avenger96 st/stm32mp151a-dhcor-testbench st/stm32mp153c-dhcor-drc-compact"
CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SPL_ENV_IS_NOWHERE=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_IP_DEFRAG=y
CONFIG_TFTP_TSIZE=y
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.1.1"
CONFIG_PROT_TCP_SACK=y
CONFIG_IPV6=y
CONFIG_STM32_ADC=y
CONFIG_SPL_BLOCK_CACHE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
CONFIG_GPIO_HOG=y
CONFIG_DM_HWSPINLOCK=y
CONFIG_HWSPINLOCK_STM32=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_STM32F7=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_STM32_FMC2_EBI=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x53
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_STM32_SDMMC2=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_ANEG_TIMEOUT=20000
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DWC_ETH_QOS=y
CONFIG_KS8851_MLL=y
CONFIG_PHY=y
CONFIG_SPL_PHY=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PINCONF=y
# CONFIG_SPL_PINCTRL_FULL is not set
CONFIG_PINCTRL_STMFX=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_STPMIC1=y
CONFIG_DM_REGULATOR=y
CONFIG_SPL_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_REGULATOR_STM32_VREFBUF=y
CONFIG_DM_REGULATOR_STPMIC1=y
CONFIG_SPL_DM_REGULATOR_STPMIC1=y
CONFIG_REMOTEPROC_STM32_COPRO=y
CONFIG_DM_RTC=y
CONFIG_RTC_STM32=y
CONFIG_SERIAL_RX_BUFFER=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_STM32_QSPI=y
CONFIG_STM32_SPI=y
CONFIG_SYSRESET_SYSCON=y
CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_SPL_DM_USB_GADGET=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC2=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_GADGET=y
CONFIG_SPL_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="dh"
CONFIG_USB_GADGET_VENDOR_NUM=0x0483
CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_SPL_DFU=y
CONFIG_WDT=y
CONFIG_WDT_STM32MP=y
CONFIG_FAT_WRITE=y
# CONFIG_BINMAN_FDT is not set
configs/stm32mp15_dhsom.config
+70
View File
@@ -0,0 +1,70 @@
#include <configs/stm32mp_dhsom.config>
# CONFIG_ARMV7_VIRT is not set
# CONFIG_BINMAN_FDT is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
# CONFIG_SPL_PINCTRL_FULL is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_SIZE_LIMIT=1441792
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_BOOTDELAY=1
CONFIG_CMD_ADC=y
CONFIG_CMD_REMOTEPROC=y
CONFIG_CMD_STBOARD=y
CONFIG_CMD_STM32PROG_OTP=y
CONFIG_CONSOLE_MUX=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000
CONFIG_DM_HWSPINLOCK=y
CONFIG_DM_REGULATOR_STM32_VREFBUF=y
CONFIG_HAS_BOARD_SIZE_LIMIT=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_HWSPINLOCK_STM32=y
CONFIG_KS8851_MLL=y
CONFIG_PHY_ANEG_TIMEOUT=20000
CONFIG_PINCTRL_STMFX=y
CONFIG_REMOTEPROC_STM32_COPRO=y
CONFIG_SERVERIP="192.168.1.1"
CONFIG_SF_DEFAULT_SPEED=50000000
CONFIG_SPL=y
CONFIG_SPL_BLOCK_CACHE=y
CONFIG_SPL_BOOTCOUNT_LIMIT=y
CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
CONFIG_SPL_DFU=y
CONFIG_SPL_DM_REGULATOR=y
CONFIG_SPL_DM_REGULATOR_STPMIC1=y
CONFIG_SPL_DM_SPI=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_DM_USB_GADGET=y
CONFIG_SPL_ENV_IS_NOWHERE=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
CONFIG_SPL_I2C=y
CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0xc1000000
CONFIG_SPL_MAX_FOOTPRINT=0x3db00
CONFIG_SPL_MMC=y
CONFIG_SPL_MTD=y
CONFIG_SPL_PHY=y
CONFIG_SPL_POWER=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_SPI=y
CONFIG_SPL_SPI_FLASH_MTD=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_STACK=0x30000000
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
CONFIG_SPL_TEXT_BASE=0x2FFC2500
CONFIG_SPL_USB_GADGET=y
CONFIG_STM32_ADC=y
CONFIG_SYSRESET_SYSCON=y
CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C
CONFIG_SYS_MALLOC_F_LEN=0x3000
CONFIG_SYS_PBSIZE=1050
CONFIG_PREBOOT="run dh_preboot"
CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
CONFIG_TARGET_DH_STM32MP1_PDK2=y
CONFIG_USE_SERVERIP=y
configs/stm32mp_dhsom.config
+105
View File
@@ -0,0 +1,105 @@
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_EFI_LOADER is not set
# CONFIG_ISO_PARTITION is not set
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_BTRFS=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
CONFIG_CMD_DHCP6=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_SPI=y
CONFIG_CMD_STM32KEY=y
CONFIG_CMD_STM32PROG=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_UNZIP=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_WGET=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_DM_I2C=y
CONFIG_DM_MTD=y
CONFIG_DM_PMIC=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_REGULATOR_STPMIC1=y
CONFIG_DM_RTC=y
CONFIG_DM_SPI=y
CONFIG_DM_SPI_FLASH=y
CONFIG_DM_USB_GADGET=y
CONFIG_DWC_ETH_QOS=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_ENV_SIZE=0x4000
CONFIG_FAT_WRITE=y
CONFIG_FIT=y
CONFIG_GPIO_HOG=y
CONFIG_I2C_EEPROM=y
CONFIG_IPV6=y
CONFIG_IP_DEFRAG=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_MTD=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_OF_LIVE=y
CONFIG_OF_UPSTREAM=y
CONFIG_PHY=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PINCONF=y
CONFIG_PMIC_STPMIC1=y
CONFIG_PROT_TCP_SACK=y
CONFIG_RTC_STM32=y
CONFIG_SERIAL_RX_BUFFER=y
CONFIG_SPI=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_STM32_FMC2_EBI=y
CONFIG_STM32_QSPI=y
CONFIG_STM32_SDMMC2=y
CONFIG_STM32_SPI=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_SYS_I2C_STM32F7=y
CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_SYS_PROMPT="STM32MP> "
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_TFTP_TSIZE=y
CONFIG_USB=y
CONFIG_USB_DWC2=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_MANUFACTURER="dh"
CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
CONFIG_USB_GADGET_VENDOR_NUM=0x0483
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
CONFIG_VERSION_VARIABLE=y
CONFIG_WDT=y
CONFIG_WDT_STM32MP=y
include/configs/stm32mp15_dh_dhsom.h
+16 -1
View File
@@ -18,6 +18,8 @@
#endif
#define STM32MP_BOARD_EXTRA_ENV \
"dh_preboot=" \
"run dh_testbench_backward_compat\0" \
"dh_update_sd_to_emmc=" /* Install U-Boot from SD to eMMC */ \
"setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \
"load mmc 0:4 ${loadaddr1} boot/u-boot-spl.stm32 && " \
@@ -61,7 +63,20 @@
"stdout=serial\0" \
"stderr=serial\0" \
"update_sf=run dh_update_sd_to_sf\0" \
"usb_pgood_delay=1000\0"
"usb_pgood_delay=1000\0" \
/* Old testbench-only backward compatibility environment */ \
"dh_testbench_backward_compat=" \
"test ${board_name} = \"dh,stm32mp15xx-dhcor-testbench\" && " \
"run load_bootenv importbootenv\0" \
"importbootenv=" \
"echo Importing environment from DHupdate.ini...;" \
"env import -t ${loadaddr} ${filesize}\0" \
"load_bootenv=" \
"usb reset && " \
"load usb ${usbdev}:${usbpart} ${loadaddr} DHupdate.ini && " \
"echo \"--> Update: found DHupdate.ini (${filesize} bytes)\"\0" \
"usbdev=0\0" \
"usbpart=1\0"
#include <configs/stm32mp15_common.h>