rockchip: rk3399-rockpro64: Sync DT from v6.8 and update defconfig
Sync rk3399-rockpro64 device tree from Linux kernel v6.8. Add SF_DEFAULT_SPEED=10000000 and SPI_FLASH_SFDP_SUPPORT=y to improve support for booting from SPI flash. Remove USE_PREBOOT=y to speed up booting, standard boot will init USB after faster boot media has been evaluated. Add CMD_POWEROFF=y to support poweroff using cmdline and power on using the pwr button on the board. Add PHY_REALTEK=y and DM_ETH_PHY=y to support ethernet PHY. Remove SPL_TINY_MEMSET=y to use full memset in SPL. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jonas Karlman
committed by
Kever Yang
Kever Yang
parent
a7a3448708
commit
40bb3089bc
@@ -11,6 +11,7 @@
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
ethernet0 = &gmac;
|
||||
mmc0 = &sdio0;
|
||||
mmc1 = &sdmmc;
|
||||
mmc2 = &sdhci;
|
||||
@@ -20,6 +21,15 @@
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
/* enable for panel backlight support */
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <5>;
|
||||
pwms = <&pwm0 0 1000000 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
@@ -33,7 +43,7 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwrbtn>;
|
||||
|
||||
power {
|
||||
key-power {
|
||||
debounce-interval = <100>;
|
||||
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
label = "GPIO Key Power";
|
||||
@@ -69,6 +79,7 @@
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 100 150 200 255>;
|
||||
#cooling-cells = <2>;
|
||||
fan-supply = <&vcc12v_dcin>;
|
||||
pwms = <&pwm1 0 50000 0>;
|
||||
@@ -106,6 +117,14 @@
|
||||
};
|
||||
};
|
||||
|
||||
avdd: avdd-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "avdd";
|
||||
regulator-min-microvolt = <11000000>;
|
||||
regulator-max-microvolt = <11000000>;
|
||||
vin-supply = <&vcc3v3_s0>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
@@ -212,12 +231,12 @@
|
||||
vdd_log: vdd-log {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 25000 1>;
|
||||
pwm-supply = <&vcc5v0_sys>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1700000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -245,6 +264,34 @@
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_thermal {
|
||||
trips {
|
||||
cpu_warm: cpu_warm {
|
||||
temperature = <55000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
cpu_hot: cpu_hot {
|
||||
temperature = <65000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map2 {
|
||||
trip = <&cpu_warm>;
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
};
|
||||
|
||||
map3 {
|
||||
trip = <&cpu_hot>;
|
||||
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -371,8 +418,6 @@
|
||||
|
||||
vcc3v0_touch: LDO_REG2 {
|
||||
regulator-name = "vcc3v0_touch";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
@@ -461,8 +506,6 @@
|
||||
|
||||
vcc3v3_s0: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
@@ -536,6 +579,19 @@
|
||||
vbus-supply = <&vcc5v0_typec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* enable for pine64 touch screen support */
|
||||
touch: touchscreen@5d {
|
||||
compatible = "goodix,gt911";
|
||||
reg = <0x5d>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
|
||||
AVDD28-supply = <&vcc3v0_touch>;
|
||||
VDDIO-supply = <&vcc3v0_touch>;
|
||||
irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
@@ -571,6 +627,36 @@
|
||||
gpio1830-supply = <&vcc_3v0>;
|
||||
};
|
||||
|
||||
/* enable for pine64 panel display support */
|
||||
&mipi_dsi {
|
||||
clock-master;
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
mipi_out: port@1 {
|
||||
reg = <1>;
|
||||
|
||||
mipi_out_panel: endpoint {
|
||||
remote-endpoint = <&mipi_in_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mipi_panel: panel@0 {
|
||||
compatible = "feiyang,fy07024di26a30d";
|
||||
reg = <0>;
|
||||
avdd-supply = <&avdd>;
|
||||
backlight = <&backlight>;
|
||||
dvdd-supply = <&vcc3v3_s0>;
|
||||
|
||||
port {
|
||||
mipi_in_panel: endpoint {
|
||||
remote-endpoint = <&mipi_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
num-lanes = <4>;
|
||||
|
||||
@@ -4,6 +4,7 @@ CONFIG_COUNTER_FREQUENCY=24000000
|
||||
CONFIG_ARCH_ROCKCHIP=y
|
||||
CONFIG_SPL_GPIO=y
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_SF_DEFAULT_SPEED=10000000
|
||||
CONFIG_ENV_SIZE=0x8000
|
||||
CONFIG_ENV_OFFSET=0x3F8000
|
||||
CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64"
|
||||
@@ -20,7 +21,6 @@ CONFIG_PCI=y
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_BOOTSTAGE=y
|
||||
CONFIG_BOOTSTAGE_REPORT=y
|
||||
CONFIG_USE_PREBOOT=y
|
||||
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
|
||||
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
||||
CONFIG_SPL_MAX_SIZE=0x40000
|
||||
@@ -34,6 +34,7 @@ CONFIG_CMD_BOOTZ=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_PCI=y
|
||||
CONFIG_CMD_POWEROFF=y
|
||||
CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_TIME=y
|
||||
@@ -57,7 +58,10 @@ CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_SDMA=y
|
||||
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
||||
CONFIG_SF_DEFAULT_BUS=1
|
||||
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
|
||||
CONFIG_SPI_FLASH_GIGADEVICE=y
|
||||
CONFIG_PHY_REALTEK=y
|
||||
CONFIG_DM_ETH_PHY=y
|
||||
CONFIG_ETH_DESIGNWARE=y
|
||||
CONFIG_GMAC_ROCKCHIP=y
|
||||
CONFIG_NVME_PCI=y
|
||||
@@ -96,5 +100,4 @@ CONFIG_VIDEO=y
|
||||
CONFIG_DISPLAY=y
|
||||
CONFIG_VIDEO_ROCKCHIP=y
|
||||
CONFIG_DISPLAY_ROCKCHIP_HDMI=y
|
||||
CONFIG_SPL_TINY_MEMSET=y
|
||||
CONFIG_ERRNO_STR=y
|
||||
|
||||
Reference in New Issue
Block a user