phycore-imx8mp: Enable standard boot
Enable standard boot for the phycore-imx8mp and use it as default. Add all variables required for standard boot to the environment. Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de> Tested-by: Martin Schwan <m.schwan@phytec.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
This commit is contained in:
Leonard Anderweit
committed by
Fabio Estevam
Fabio Estevam
parent
9936724aa9
commit
2a32b4f340
@@ -1,82 +1,28 @@
|
||||
#include <env/phytec/rauc.env>
|
||||
#include <env/phytec/overlays.env>
|
||||
|
||||
bootcmd=
|
||||
if test ${dofastboot} = 1; then
|
||||
fastboot 0;
|
||||
fi;
|
||||
mmc dev ${mmcdev};
|
||||
if mmc rescan; then
|
||||
run spiprobe;
|
||||
if test ${doraucboot} = 1; then
|
||||
run raucinit;
|
||||
fi;
|
||||
if run loadimage; then
|
||||
run mmcboot;
|
||||
else
|
||||
run netboot;
|
||||
fi;
|
||||
fi;
|
||||
console=ttymxc0,115200
|
||||
bootflow scan -lb;
|
||||
bootmeths=script efi
|
||||
boot_targets=mmc2 mmc1 usb ethernet
|
||||
bootenv_addr_r=0x49100000
|
||||
fdtoverlay_addr_r=0x49000000
|
||||
boot_script_dhcp=boot.scr.uimg
|
||||
console=ttymxc0,115200
|
||||
dofastboot=0
|
||||
emmc_dev=2
|
||||
fastboot_raw_partition_all=0 4194304
|
||||
fastboot_raw_partition_bootloader=64 8128
|
||||
fdt_addr_r=0x48000000
|
||||
fdtfile=CONFIG_DEFAULT_FDT_FILE
|
||||
image=Image
|
||||
fdtoverlay_addr_r=0x49000000
|
||||
ip_dyn=yes
|
||||
kernel_addr_r=0x5A080000
|
||||
kernel_comp_addr_r=0x60000000
|
||||
kernel_comp_size=0x2000000
|
||||
mtdparts=30bb0000.spi:3840k(u-boot),128k(env),128k(env_redund),-(none)
|
||||
mtdids=nor0=30bb0000.spi
|
||||
spiprobe=true
|
||||
loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
|
||||
loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
|
||||
mmcargs=
|
||||
setenv bootargs ${mcore_clk} console=${console}
|
||||
root=/dev/mmcblk${mmcdev}p${mmcroot} ${raucargs} rootwait rw
|
||||
mmcautodetect=yes
|
||||
mmcboot=
|
||||
echo Booting from mmc ...;
|
||||
if test ${no_bootenv} = 0; then
|
||||
if run mmc_load_bootenv; then
|
||||
env import -t ${bootenv_addr_r} ${filesize};
|
||||
fi;
|
||||
fi;
|
||||
run mmcargs;
|
||||
if run loadfdt; then
|
||||
run mmc_apply_overlays;
|
||||
booti ${loadaddr} - ${fdt_addr_r};
|
||||
else
|
||||
echo WARN: Cannot load the DT;
|
||||
fi;
|
||||
mmcdev=CONFIG_ENV_MMC_DEVICE_INDEX
|
||||
mmcpart=1
|
||||
mmcroot=2
|
||||
netargs=
|
||||
setenv bootargs ${mcore_clk} console=${console} root=/dev/nfs ip=dhcp
|
||||
nfsroot=${serverip}:${nfsroot},v3,tcp
|
||||
netboot=
|
||||
echo Booting from net ...;
|
||||
if test ${ip_dyn} = yes; then
|
||||
setenv get_cmd dhcp;
|
||||
else
|
||||
setenv get_cmd tftp;
|
||||
fi;
|
||||
if test ${no_bootenv} = 0; then
|
||||
if run net_load_bootenv; then
|
||||
env import -t ${bootenv_addr_r} ${filesize};
|
||||
fi;
|
||||
fi;
|
||||
${get_cmd} ${loadaddr} ${image};
|
||||
run netargs;
|
||||
if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then
|
||||
run net_apply_overlays;
|
||||
booti ${loadaddr} - ${fdt_addr_r};
|
||||
else
|
||||
echo WARN: Cannot load the DT;
|
||||
fi;
|
||||
nfsroot=/srv/nfs
|
||||
prepare_mcore=setenv mcore_clk clk-imx8mp.mcore_booted
|
||||
sd_dev=1
|
||||
pxefile_addr_r=0x58600000
|
||||
ramdisk_addr_r=0x5E000000
|
||||
scriptaddr=0x40000000
|
||||
|
||||
@@ -31,10 +31,13 @@ CONFIG_IMX_BOOTAUX=y
|
||||
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
|
||||
CONFIG_FIT_SIGNATURE=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_BOOTSTD_FULL=y
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
CONFIG_OF_SYSTEM_SETUP=y
|
||||
CONFIG_FDT_FIXUP_PARTITIONS=y
|
||||
# CONFIG_USE_BOOTCOMMAND is not set
|
||||
CONFIG_DEFAULT_FDT_FILE="oftree"
|
||||
CONFIG_SYS_CBSIZE=2048
|
||||
CONFIG_SYS_PBSIZE=2074
|
||||
@@ -57,9 +60,11 @@ CONFIG_SPL_NOR_SUPPORT=y
|
||||
CONFIG_SPL_POWER=y
|
||||
CONFIG_SPL_SPI_FLASH_MTD=y
|
||||
CONFIG_SPL_WATCHDOG=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_SYS_PROMPT="u-boot=> "
|
||||
# CONFIG_CMD_VBE is not set
|
||||
CONFIG_CMD_BOOTEFI_SELFTEST=y
|
||||
CONFIG_CMD_ERASEENV=y
|
||||
CONFIG_CMD_NVEDIT_EFI=y
|
||||
# CONFIG_CMD_CRC32 is not set
|
||||
CONFIG_CMD_EEPROM=y
|
||||
CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
|
||||
@@ -76,17 +81,12 @@ CONFIG_CMD_SF_TEST=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_USB_SDP=y
|
||||
CONFIG_CMD_USB_MASS_STORAGE=y
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_MII=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_EFIDEBUG=y
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
CONFIG_CMD_EXT2=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
CONFIG_CMD_MTDPARTS=y
|
||||
# CONFIG_SPL_EFI_PARTITION is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
@@ -172,7 +172,6 @@ CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_DWC3=y
|
||||
CONFIG_USB_DWC3_GENERIC=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_MANUFACTURER="PHYTEC"
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
|
||||
|
||||
Reference in New Issue
Block a user