vhaudiquet/u-boot-krane
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Kconfig: drivers: restyle remaining

Browse Source 
Restyle all Kconfigs for the rest of "drivers":
Menu entries   : no space left
Menu attributes: 1 TAB
Help text      : 1 TAB + 2 spaces
Replace '---help---' by 'help'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
[trini: Add missing indentation on a few more multi-paragraph help texts]
Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Johan Jonker
2026-06-25 15:00:58 -06:00
committed by Tom Rini
parent 173ffc7bcf
commit 145d58e2c7
34 changed files with 208 additions and 208 deletions
Download Patch File Download Diff File Expand all files Collapse all files
drivers/adc/Kconfig
+1 -1
View File
@@ -5,7 +5,7 @@ config ADC
This enables ADC API for drivers, which allows driving ADC features
by single and multi-channel methods for:
- start/stop/get data for conversion of a single-channel selected by
a number or multi-channels selected by a bitmask
a number or multi-channels selected by a bitmask
- get data mask (ADC resolution)
ADC reference Voltage supply options:
- methods for get Vdd/Vss reference Voltage values with polarity
drivers/block/Kconfig
+4 -4
View File
@@ -68,10 +68,10 @@ config BLKMAP
bool "Composable virtual block devices (blkmap)"
depends on BLK
help
Create virtual block devices that are backed by various sources,
e.g. RAM, or parts of an existing block device. Though much more
rudimentary, it borrows a lot of ideas from Linux's device mapper
subsystem.
Create virtual block devices that are backed by various sources,
e.g. RAM, or parts of an existing block device. Though much more
rudimentary, it borrows a lot of ideas from Linux's device mapper
subsystem.
Example use-cases:
- Treat a region of RAM as a block device, i.e. a RAM disk. This let's
drivers/bootcount/Kconfig
+2 -2
View File
@@ -68,7 +68,7 @@ config BOOTCOUNT_ENV
saveenv on all reboots, the environment variable
"upgrade_available" is used. If "upgrade_available" is
0, "bootcount" is always 0. If "upgrade_available" is 1,
"bootcount" is incremented in the environment.
"bootcount" is incremented in the environment.
So the Userspace Application must set the "upgrade_available"
and "bootcount" variables to 0, if the system booted successfully.
@@ -83,7 +83,7 @@ config BOOTCOUNT_AT91
depends on AT91SAM9XE
config DM_BOOTCOUNT
bool "Boot counter in a device-model device"
bool "Boot counter in a device-model device"
help
Enables reading/writing the bootcount in a device-model based
backing store. If an entry in /chosen/u-boot,bootcount-device
drivers/clk/Kconfig
+2 -2
View File
@@ -134,8 +134,8 @@ config CLK_CDCE9XX
bool "Enable CDCD9XX clock driver"
depends on CLK && ARCH_OMAP2PLUS
help
Enable the clock synthesizer driver for CDCE913/925/937/949
series of chips.
Enable the clock synthesizer driver for CDCE913/925/937/949
series of chips.
config CLK_ICS8N3QV01
bool "Enable ICS8N3QV01 VCXO driver"
drivers/clk/owl/Kconfig
+4 -4
View File
@@ -1,8 +1,8 @@
config CLK_OWL
bool "Actions Semi OWL clock drivers"
depends on CLK && ARCH_OWL
help
Enable support for clock managemet unit present in Actions Semi
bool "Actions Semi OWL clock drivers"
depends on CLK && ARCH_OWL
help
Enable support for clock managemet unit present in Actions Semi
Owl series S900/S700 SoCs.
drivers/clk/renesas/Kconfig
+4 -4
View File
@@ -61,11 +61,11 @@ config CLK_RCAR_GEN3
Enable this to support the clocks on Renesas R-Car Gen3 and Gen4 SoCs.
config CLK_R8A774A1
bool "Renesas R8A774A1 clock driver"
bool "Renesas R8A774A1 clock driver"
def_bool y if R8A774A1
depends on CLK_RCAR_GEN3
help
Enable this to support the clocks on Renesas R8A774A1 SoC.
depends on CLK_RCAR_GEN3
help
Enable this to support the clocks on Renesas R8A774A1 SoC.
config CLK_R8A774B1
bool "Renesas R8A774B1 clock driver"
drivers/crypto/aspeed/Kconfig
+4 -4
View File
@@ -15,11 +15,11 @@ config ASPEED_ACRY
bool "ASPEED RSA and ECC Engine"
depends on ASPEED_AST2600
help
Select this option to enable a driver for using the RSA/ECC engine in
the ASPEED BMC SoCs.
Select this option to enable a driver for using the RSA/ECC engine in
the ASPEED BMC SoCs.
Enabling this allows the use of RSA/ECC operations in hardware without requiring the
software implementations. It also improves performance and saves code size.
Enabling this allows the use of RSA/ECC operations in hardware without requiring the
software implementations. It also improves performance and saves code size.
config ASPEED_CPTRA_SHA
bool "Caliptra SHA ACC for Aspeed AST27xx SoCs"
drivers/crypto/fsl/Kconfig
+5 -5
View File
@@ -27,27 +27,27 @@ config CAAM_64BIT
config SYS_FSL_HAS_SEC
bool
help
Enable Freescale Secure Boot and Trusted Architecture
Enable Freescale Secure Boot and Trusted Architecture
config SYS_FSL_SEC_COMPAT_2
bool
help
Secure boot and trust architecture compatible version 2
Secure boot and trust architecture compatible version 2
config SYS_FSL_SEC_COMPAT_4
bool
help
Secure boot and trust architecture compatible version 4
Secure boot and trust architecture compatible version 4
config SYS_FSL_SEC_COMPAT_5
bool
help
Secure boot and trust architecture compatible version 5
Secure boot and trust architecture compatible version 5
config SYS_FSL_SEC_COMPAT_6
bool
help
Secure boot and trust architecture compatible version 6
Secure boot and trust architecture compatible version 6
config SYS_FSL_SEC_BE
bool "Big-endian access to Freescale Secure Boot"
drivers/ddr/fsl/Kconfig
+2 -2
View File
@@ -21,12 +21,12 @@ if SYS_FSL_DDR || SYS_FSL_MMDC
config SYS_FSL_DDR_BE
bool
help
Access DDR registers in big-endian
Access DDR registers in big-endian
config SYS_FSL_DDR_LE
bool
help
Access DDR registers in little-endian
Access DDR registers in little-endian
config FSL_DDR_BIST
bool
drivers/dma/ti/Kconfig
+8 -8
View File
@@ -3,14 +3,14 @@
if ARCH_K3
config TI_K3_NAVSS_UDMA
bool "Texas Instruments UDMA"
depends on ARCH_K3
select DEVRES
select DMA
select TI_K3_NAVSS_RINGACC
select TI_K3_PSIL
help
Support for UDMA used in K3 devices.
bool "Texas Instruments UDMA"
depends on ARCH_K3
select DEVRES
select DMA
select TI_K3_NAVSS_RINGACC
select TI_K3_PSIL
help
Support for UDMA used in K3 devices.
endif
config TI_K3_PSIL
drivers/gpio/Kconfig
+24 -24
View File
@@ -294,9 +294,9 @@ config MAX7320_GPIO
bool "MAX7320 I2C GPIO Expander driver"
depends on DM_GPIO && DM_I2C
help
Support for MAX7320 I2C 8/16-bit GPIO expander.
original maxim device has 8 push/pull outputs,
some clones offers 16bit.
Support for MAX7320 I2C 8/16-bit GPIO expander.
original maxim device has 8 push/pull outputs,
some clones offers 16bit.
config MAX77663_GPIO
bool "MAX77663 GPIO cell of PMIC driver"
@@ -313,23 +313,23 @@ config MCP230XX_GPIO
help
Support for Microchip's MCP230XX I2C and SPI connected GPIO devices.
The following chips are supported:
- MCP23008
- MCP23017
- MCP23018
- MCP23S08
- MCP23S17
- MCP23S18
- MCP23008
- MCP23017
- MCP23018
- MCP23S08
- MCP23S17
- MCP23S18
config MSCC_SGPIO
bool "Microsemi Serial GPIO driver"
depends on DM_GPIO && SOC_VCOREIII
help
Support for the VCoreIII SoC serial GPIO device. By using a
serial interface, the SIO controller significantly extends
the number of available GPIOs with a minimum number of
additional pins on the device. The primary purpose of the
SIO controller is to connect control signals from SFP
modules and to act as an LED controller.
serial interface, the SIO controller significantly extends
the number of available GPIOs with a minimum number of
additional pins on the device. The primary purpose of the
SIO controller is to connect control signals from SFP
modules and to act as an LED controller.
config MSM_GPIO
bool "Qualcomm GPIO driver"
@@ -404,8 +404,8 @@ config PCF8575_GPIO
bool "PCF8575 I2C GPIO Expander driver"
depends on DM_GPIO && DM_I2C
help
Support for PCF8575 I2C 16-bit GPIO expander. Most of these
chips are from NXP and TI.
Support for PCF8575 I2C 16-bit GPIO expander. Most of these
chips are from NXP and TI.
config RCAR_GPIO
bool "Renesas R-Car GPIO driver"
@@ -459,9 +459,9 @@ config SUNXI_GPIO
config SUNXI_NEW_PINCTRL
bool
depends on SUNXI_GPIO
---help---
The Allwinner D1 and other new SoCs use a different register map
for the GPIO block, which we need to know about in the SPL.
help
The Allwinner D1 and other new SoCs use a different register map
for the GPIO block, which we need to know about in the SPL.
config XILINX_GPIO
bool "Xilinx GPIO driver"
@@ -728,15 +728,15 @@ config SLG7XL45106_I2C_GPO
bool "slg7xl45106 i2c gpo expander"
depends on DM_GPIO && ARCH_ZYNQMP
help
Support for slg7xl45106 i2c gpo expander. It is an i2c based
8-bit gpo expander, all gpo lines are controlled by writing
value into data register.
Support for slg7xl45106 i2c gpo expander. It is an i2c based
8-bit gpo expander, all gpo lines are controlled by writing
value into data register.
config GPIO_SCMI
bool "SCMI GPIO pinctrl driver"
depends on DM_GPIO && PINCTRL_SCMI
help
Support pinctrl GPIO over the SCMI interface.
Support pinctrl GPIO over the SCMI interface.
config ADP5585_GPIO
bool "ADP5585 GPIO driver"
@@ -761,6 +761,6 @@ config MPFS_GPIO
bool "Enable Polarfire SoC GPIO driver"
depends on DM_GPIO
help
Enable to support the GPIO driver on Polarfire SoC
Enable to support the GPIO driver on Polarfire SoC
endif
drivers/led/Kconfig
+1 -1
View File
@@ -133,7 +133,7 @@ config LED_GPIO
config SPL_LED_GPIO
bool "LED support for GPIO-connected LEDs in SPL"
depends on SPL_LED && SPL_DM_GPIO
depends on SPL_LED && SPL_DM_GPIO
help
This option is an SPL-variant of the LED_GPIO option.
See the help of LED_GPIO for details.
drivers/memory/Kconfig
+8 -8
View File
@@ -44,15 +44,15 @@ config STM32_OMM
This driver manages the muxing between the 2 OSPI busses and
the 2 output ports. There are 4 possible muxing configurations:
- direct mode (no multiplexing): OSPI1 output is on port 1 and OSPI2
output is on port 2
output is on port 2
- OSPI1 and OSPI2 are multiplexed over the same output port 1
- swapped mode (no multiplexing), OSPI1 output is on port 2,
OSPI2 output is on port 1
OSPI2 output is on port 1
- OSPI1 and OSPI2 are multiplexed over the same output port 2
It also manages :
- the split of the memory area shared between the 2 OSPI instances.
- chip select selection override.
- the time between 2 transactions in multiplexed mode.
- the split of the memory area shared between the 2 OSPI instances.
- chip select selection override.
- the time between 2 transactions in multiplexed mode.
config TI_AEMIF
tristate "Texas Instruments AEMIF driver"
@@ -71,9 +71,9 @@ config TI_GPMC
depends on MEMORY && CLK && OF_CONTROL
help
This driver is for the General Purpose Memory Controller (GPMC)
present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows
interfacing to a variety of asynchronous as well as synchronous
memory drives like NOR, NAND, OneNAND, SRAM.
present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows
interfacing to a variety of asynchronous as well as synchronous
memory drives like NOR, NAND, OneNAND, SRAM.
if TI_GPMC
config TI_GPMC_DEBUG
drivers/mfd/Kconfig
+3 -3
View File
@@ -1,4 +1,4 @@
config MFD_ATMEL_SMC
bool "Atmel Static Memory Controller driver"
help
Say yes here to support Atmel Static Memory Controller driver.
bool "Atmel Static Memory Controller driver"
help
Say yes here to support Atmel Static Memory Controller driver.
drivers/misc/Kconfig
+4 -4
View File
@@ -71,9 +71,9 @@ config ATSHA204A
select BITREVERSE
depends on MISC
help
Enable support for I2C connected Atmel's ATSHA204A
CryptoAuthentication module found for example on the Turris Omnia
board.
Enable support for I2C connected Atmel's ATSHA204A
CryptoAuthentication module found for example on the Turris Omnia
board.
config GATEWORKS_SC
bool "Gateworks System Controller Support"
@@ -94,7 +94,7 @@ config QCOM_GENI
etc.
config ROCKCHIP_EFUSE
bool "Rockchip e-fuse support"
bool "Rockchip e-fuse support"
depends on MISC
help
Enable (read-only) access for the e-fuse block found in Rockchip
drivers/mmc/Kconfig
+4 -4
View File
@@ -332,7 +332,7 @@ config MMC_MESON_GX
bool "Meson GX EMMC controller support"
depends on ARCH_MESON
help
Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
config MMC_OWL
bool "Actions OWL Multimedia Card Interface support"
@@ -659,8 +659,8 @@ config MMC_SDHCI_MSM
depends on MMC_SDHCI && ARCH_SNAPDRAGON
help
Enables support for SDHCI 2.0 controller present on some Qualcomm
Snapdragon devices. This device is compatible with eMMC v4.5 and
SD 3.0 specifications. Both SD and eMMC devices are supported.
Snapdragon devices. This device is compatible with eMMC v4.5 and
SD 3.0 specifications. Both SD and eMMC devices are supported.
Card-detect gpios are not supported.
config MMC_SDHCI_MV
@@ -852,7 +852,7 @@ config FTSDC010_SDIO
bool "Support ftsdc010 sdio"
depends on FTSDC010
help
This can enable ftsdc010 sdio function.
This can enable ftsdc010 sdio function.
config MMC_MTK
bool "MediaTek SD/MMC Card Interface support"
drivers/mux/Kconfig
+6 -6
View File
@@ -5,17 +5,17 @@ config MULTIPLEXER
depends on DM
select DEVRES
help
The mux framework is a minimalistic subsystem that handles multiplexer
controllers. It provides the same API as Linux and mux drivers should
be portable with a minimum effort.
The mux framework is a minimalistic subsystem that handles multiplexer
controllers. It provides the same API as Linux and mux drivers should
be portable with a minimum effort.
if MULTIPLEXER
config SPL_MUX_MMIO
bool "MMIO register bitfield-controlled Multiplexer"
depends on MULTIPLEXER && SYSCON
help
MMIO register bitfield-controlled Multiplexer controller.
depends on MULTIPLEXER && SYSCON
help
MMIO register bitfield-controlled Multiplexer controller.
The driver builds multiplexer controllers for bitfields in a syscon
register. For N bit wide bitfields, there will be 2^N possible
drivers/pci/Kconfig
+8 -8
View File
@@ -101,11 +101,11 @@ config PCI_ENHANCED_ALLOCATION
devices in place of traditional BARS for allocation of resources.
config PCI_ARID
bool "Enable Alternate Routing-ID support for PCI"
help
Say Y here if you want to enable Alternate Routing-ID capability
support on PCI devices. This helps to skip some devices in BDF
scan that are not present.
bool "Enable Alternate Routing-ID support for PCI"
help
Say Y here if you want to enable Alternate Routing-ID capability
support on PCI devices. This helps to skip some devices in BDF
scan that are not present.
config PCI_SCAN_SHOW
bool "Show PCI devices during startup"
@@ -287,7 +287,7 @@ config PCI_IOMMU_EXTRA_MAPPINGS
the node describing the PCI controller.
The intent is to cover SR-IOV scenarios which need mappings for VFs
and PCI hot-plug scenarios. More documentation can be found under:
arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra
arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra
config PCIE_LAYERSCAPE_EP
bool "Layerscape PCIe Endpoint mode support"
@@ -440,8 +440,8 @@ config PCIE_XILINX_NWL
bool "Xilinx NWL PCIe controller"
depends on ARCH_ZYNQMP
help
Say 'Y' here if you want support for Xilinx / AMD NWL PCIe
controller as Root Port.
Say 'Y' here if you want support for Xilinx / AMD NWL PCIe
controller as Root Port.
config PCIE_PLDA_COMMON
bool
drivers/pci_endpoint/Kconfig
+4 -4
View File
@@ -9,10 +9,10 @@ config PCI_ENDPOINT
bool "PCI Endpoint Support"
depends on DM
help
Enable this configuration option to support configurable PCI
endpoints. This should be enabled if the platform has a PCI
controllers that can operate in endpoint mode (as a device
connected to PCI host or bridge).
Enable this configuration option to support configurable PCI
endpoints. This should be enabled if the platform has a PCI
controllers that can operate in endpoint mode (as a device
connected to PCI host or bridge).
config PCIE_CADENCE_EP
bool "Cadence PCIe endpoint controller"
drivers/phy/Kconfig
+9 -9
View File
@@ -72,14 +72,14 @@ config AB8500_USB_PHY
Support for the USB OTG PHY in ST-Ericsson AB8500.
config APPLE_ATCPHY
bool "Apple Type-C PHY Driver"
depends on PHY && ARCH_APPLE
default y
help
Support for the Apple Type-C PHY.
bool "Apple Type-C PHY Driver"
depends on PHY && ARCH_APPLE
default y
help
Support for the Apple Type-C PHY.
This is a dummy driver since the PHY is initialized
sufficiently by previous stage firmware.
This is a dummy driver since the PHY is initialized
sufficiently by previous stage firmware.
config BCM6318_USBH_PHY
bool "BCM6318 USBH PHY support"
@@ -249,14 +249,14 @@ config MT7620_USB_PHY
depends on PHY
depends on SOC_MT7620
help
Support the intergated USB PHY in MediaTek MT7620 SoC
Support the intergated USB PHY in MediaTek MT7620 SoC
config MT76X8_USB_PHY
bool "MediaTek MT76x8 (7628/88) USB PHY support"
depends on PHY
depends on SOC_MT7628
help
Support the USB PHY in MT76x8 SoCs
Support the USB PHY in MT76x8 SoCs
This PHY is found on MT76x8 devices supporting USB.
drivers/phy/qcom/Kconfig
+1 -1
View File
@@ -2,7 +2,7 @@ config MSM8916_USB_PHY
bool
select PHY
help
Support the Qualcomm MSM8916 USB PHY
Support the Qualcomm MSM8916 USB PHY
This PHY is found on qualcomm dragonboard410c development board.
drivers/ram/aspeed/Kconfig
+7 -7
View File
@@ -4,19 +4,19 @@ menuconfig ASPEED_RAM
depends on ARCH_ASPEED || TARGET_ASPEED_AST2700_IBEX
default ARCH_ASPEED
help
Configuration options for DDR SDRAM on ASPEED systems.
Configuration options for DDR SDRAM on ASPEED systems.
RAM initialisation is always built in for the platform. This menu
allows customisation of the configuration used.
RAM initialisation is always built in for the platform. This menu
allows customisation of the configuration used.
config ASPEED_DDR4_DUALX8
bool "Enable Dual X8 DDR4 die"
depends on ASPEED_RAM
help
Say Y if dual X8 DDR4 die is used on the board. The ASPEED DDRM
SRAM controller needs to know if the memory chip mounted on the
board is dual x8 die or not, otherwise it may get the wrong
size of the memory space.
Say Y if dual X8 DDR4 die is used on the board. The ASPEED DDRM
SRAM controller needs to know if the memory chip mounted on the
board is dual x8 die or not, otherwise it may get the wrong
size of the memory space.
config ASPEED_BYPASS_SELFTEST
depends on ASPEED_RAM
drivers/ram/octeon/Kconfig
+3 -3
View File
@@ -2,14 +2,14 @@ config RAM_OCTEON
bool "Ram drivers for Octeon SoCs"
depends on RAM && ARCH_OCTEON
help
This enables support for RAM drivers for Octeon SoCs.
This enables support for RAM drivers for Octeon SoCs.
if RAM_OCTEON
config RAM_OCTEON_DDR4
bool "Octeon III DDR4 RAM support"
help
This enables support for DDR4 RAM suppoort for Octeon III. This does
not include support for Octeon CN70XX.
This enables support for DDR4 RAM suppoort for Octeon III. This does
not include support for Octeon CN70XX.
endif # RAM_OCTEON
drivers/ram/stm32mp1/Kconfig
+18 -18
View File
@@ -6,43 +6,43 @@ config STM32MP1_DDR
select SPL_RAM if SPL
default y
help
activate STM32MP1 DDR controller driver for STM32MP1 soc
family: support for LPDDR2, LPDDR3 and DDR3
the SDRAM parameters for controleur and phy need to be provided
in device tree (computed by DDR tuning tools)
activate STM32MP1 DDR controller driver for STM32MP1 soc
family: support for LPDDR2, LPDDR3 and DDR3
the SDRAM parameters for controleur and phy need to be provided
in device tree (computed by DDR tuning tools)
config STM32MP1_DDR_INTERACTIVE
bool "STM32MP1 DDR driver : interactive support"
depends on STM32MP1_DDR
help
activate interactive support in STM32MP1 DDR controller driver
used for DDR tuning tools
to enter in intercative mode type 'd' during SPL DDR driver
initialisation
activate interactive support in STM32MP1 DDR controller driver
used for DDR tuning tools
to enter in intercative mode type 'd' during SPL DDR driver
initialisation
config STM32MP1_DDR_INTERACTIVE_FORCE
bool "STM32MP1 DDR driver : force interactive mode"
depends on STM32MP1_DDR_INTERACTIVE
help
force interactive mode in STM32MP1 DDR controller driver
skip the polling of character 'd' in console
useful when SPL is loaded in sysram
directly by programmer
force interactive mode in STM32MP1 DDR controller driver
skip the polling of character 'd' in console
useful when SPL is loaded in sysram
directly by programmer
config STM32MP1_DDR_TESTS
bool "STM32MP1 DDR driver : tests support"
depends on STM32MP1_DDR_INTERACTIVE
default y
help
activate test support for interactive support in
STM32MP1 DDR controller driver: command test
activate test support for interactive support in
STM32MP1 DDR controller driver: command test
config STM32MP1_DDR_TUNING
bool "STM32MP1 DDR driver : support of tuning"
depends on STM32MP1_DDR_INTERACTIVE
default y
help
activate tuning command in STM32MP1 DDR interactive mode
used for DDR tuning tools
- DQ Deskew algorithm
- DQS Trimming
activate tuning command in STM32MP1 DDR interactive mode
used for DDR tuning tools
- DQ Deskew algorithm
- DQS Trimming
drivers/reboot-mode/Kconfig
+9 -9
View File
@@ -11,26 +11,26 @@ config DM_REBOOT_MODE
depends on DM
select DEVRES
help
Enable support for reboot mode control. This will allow users to
adjust the boot process based on reboot mode parameter
passed to U-Boot.
Enable support for reboot mode control. This will allow users to
adjust the boot process based on reboot mode parameter
passed to U-Boot.
config DM_REBOOT_MODE_GPIO
bool "Use GPIOs as reboot mode backend"
depends on DM_REBOOT_MODE
help
Use GPIOs to control the reboot mode. This will allow users to boot
a device in a specific mode by using a GPIO that can be controlled
outside U-Boot.
Use GPIOs to control the reboot mode. This will allow users to boot
a device in a specific mode by using a GPIO that can be controlled
outside U-Boot.
config DM_REBOOT_MODE_RTC
bool "Use RTC as reboot mode backend"
depends on DM_RTC
depends on DM_REBOOT_MODE
help
Use RTC non volatile memory to control the reboot mode. This will allow users to boot
a device in a specific mode by using a register(s) that can be controlled
outside U-Boot (e.g. Kernel).
Use RTC non volatile memory to control the reboot mode. This will allow users to boot
a device in a specific mode by using a register(s) that can be controlled
outside U-Boot (e.g. Kernel).
config REBOOT_MODE_NVMEM
bool "Use NVMEM reboot mode"
drivers/rtc/Kconfig
+2 -2
View File
@@ -44,8 +44,8 @@ config VPL_DM_RTC
config RTC_ENABLE_32KHZ_OUTPUT
bool "Enable RTC 32Khz output"
help
Some real-time clocks support the output of 32kHz square waves (such as ds3231),
the config symbol choose Real Time Clock device 32Khz output feature.
Some real-time clocks support the output of 32kHz square waves (such as ds3231),
the config symbol choose Real Time Clock device 32Khz output feature.
config RTC_ARMADA38X
bool "Enable Armada 38x Marvell SoC RTC"
drivers/serial/Kconfig
+8 -8
View File
@@ -759,11 +759,11 @@ config MVEBU_A3700_UART
config MCFUART
bool "Freescale ColdFire UART support"
depends on M68K
help
Choose this option to add support for UART driver on the ColdFire
SoC's family. The serial communication channel provides a full-duplex
asynchronous/synchronous receiver and transmitter deriving an
operating frequency from the internal bus clock or an external clock.
help
Choose this option to add support for UART driver on the ColdFire
SoC's family. The serial communication channel provides a full-duplex
asynchronous/synchronous receiver and transmitter deriving an
operating frequency from the internal bus clock or an external clock.
config MXC_UART
bool "IMX serial port support"
@@ -1027,9 +1027,9 @@ config OCTEON_SERIAL_BOOTCMD
select SYS_CONSOLE_IS_IN_ENV
select CONSOLE_MUX
help
This driver supports remote input over the PCIe bus from a host
to U-Boot for entering commands. It is utilized by the host
commands 'oct-remote-load' and 'oct-remote-bootcmd'.
This driver supports remote input over the PCIe bus from a host
to U-Boot for entering commands. It is utilized by the host
commands 'oct-remote-load' and 'oct-remote-bootcmd'.
config OCTEON_SERIAL_PCIE_CONSOLE
bool "MIPS Octeon PCIe remote console"
drivers/smem/Kconfig
+15 -15
View File
@@ -4,22 +4,22 @@ menuconfig SMEM
if SMEM
config SANDBOX_SMEM
bool "Sandbox Shared Memory Manager (SMEM)"
depends on SANDBOX && DM
help
enable SMEM support for sandbox. This is an emulation of a real SMEM
manager.
The sandbox driver allocates a shared memory from the heap and
initialzies it on start.
bool "Sandbox Shared Memory Manager (SMEM)"
depends on SANDBOX && DM
help
enable SMEM support for sandbox. This is an emulation of a real SMEM
manager.
The sandbox driver allocates a shared memory from the heap and
initialzies it on start.
config MSM_SMEM
bool "Qualcomm Shared Memory Manager (SMEM)"
depends on DM
depends on ARCH_SNAPDRAGON || ARCH_IPQ40XX
select DEVRES
help
Enable support for the Qualcomm Shared Memory Manager.
The driver provides an interface to items in a heap shared among all
processors in a Qualcomm platform.
bool "Qualcomm Shared Memory Manager (SMEM)"
depends on DM
depends on ARCH_SNAPDRAGON || ARCH_IPQ40XX
select DEVRES
help
Enable support for the Qualcomm Shared Memory Manager.
The driver provides an interface to items in a heap shared among all
processors in a Qualcomm platform.
endif # menu "SMEM Support"
drivers/soc/ti/Kconfig
+2 -2
View File
@@ -21,8 +21,8 @@ config TI_KEYSTONE_SERDES
bool "Keystone SerDes driver for ethernet"
depends on ARCH_KEYSTONE
help
SerDes driver for Keystone SoC used for ethernet support on TI
K2 platforms.
SerDes driver for Keystone SoC used for ethernet support on TI
K2 platforms.
config TI_PRUSS
bool "Support for TI's K3 based Pruss driver"
drivers/spi/Kconfig
+14 -14
View File
@@ -2,10 +2,10 @@ menuconfig SPI
bool "SPI Support"
help
The "Serial Peripheral Interface" is a low level synchronous
protocol. Chips that support SPI can have data transfer rates
up to several tens of Mbit/sec. Chips are addressed with a
controller and a chipselect. Most SPI slaves don't support
dynamic device discovery; some are even write-only or read-only.
protocol. Chips that support SPI can have data transfer rates
up to several tens of Mbit/sec. Chips are addressed with a
controller and a chipselect. Most SPI slaves don't support
dynamic device discovery; some are even write-only or read-only.
SPI is widely used by microcontrollers to talk with sensors,
eeprom and flash memory, codecs and various other controller
@@ -200,11 +200,11 @@ config CADENCE_XSPI
by using the Auto Command work mode.
config CF_SPI
bool "ColdFire SPI driver"
depends on M68K
help
Enable the ColdFire SPI driver. This driver can be used on
some m68k SoCs.
bool "ColdFire SPI driver"
depends on M68K
help
Enable the ColdFire SPI driver. This driver can be used on
some m68k SoCs.
config CV1800B_SPIF
bool "Sophgo cv1800b SPI Flash Controller driver"
@@ -352,7 +352,7 @@ config MTK_SNOR
select DEVRES
help
Enable the Mediatek SPINOR controller driver. This driver has
better read/write performance with NOR.
better read/write performance with NOR.
config MTK_SNFI_SPI
bool "Mediatek SPI memory controller driver"
@@ -544,8 +544,8 @@ config SPI_SIFIVE
config SOFT_SPI
bool "Soft SPI driver"
help
Enable Soft SPI driver. This driver is to use GPIO simulate
the SPI protocol.
Enable Soft SPI driver. This driver is to use GPIO simulate
the SPI protocol.
config SPI_SN_F_OSPI
tristate "Socionext F_OSPI SPI flash controller"
@@ -673,8 +673,8 @@ config ZYNQMP_GQSPI
config SPI_STACKED_PARALLEL
bool "Enable support for stacked or parallel memories"
help
Enable support for stacked/or parallel memories. This functionality
may appear on Xilinx hardware. By default this is disabled.
Enable support for stacked/or parallel memories. This functionality
may appear on Xilinx hardware. By default this is disabled.
endif # if DM_SPI
drivers/spmi/Kconfig
+4 -4
View File
@@ -3,7 +3,7 @@ menu "SPMI support"
config SPMI
bool "Enable SPMI bus support"
depends on DM
---help---
help
Select this to enable to support SPMI bus.
SPMI (System Power Management Interface) bus is used
to connect PMIC devices on various SoCs.
@@ -11,13 +11,13 @@ config SPMI
config SPMI_MSM
bool "Support Qualcomm SPMI bus"
depends on SPMI
---help---
help
Support SPMI bus implementation found on Qualcomm Snapdragon SoCs.
config SPMI_SANDBOX
bool "Support for Sandbox SPMI bus"
depends on SPMI
---help---
help
Demo SPMI bus implementation. Emulates part of PM8916 as single
slave (0) on bus. It has 4 GPIO peripherals, pid 0xC0-0xC3.
slave (0) on bus. It has 4 GPIO peripherals, pid 0xC0-0xC3.
endmenu
drivers/thermal/Kconfig
+12 -12
View File
@@ -13,9 +13,9 @@ config IMX_THERMAL
depends on MX6 || MX7
help
Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs.
It supports one critical trip point and one passive trip point. The
cpufreq is used as the cooling device to throttle CPUs when the
passive trip is crossed.
It supports one critical trip point and one passive trip point. The
cpufreq is used as the cooling device to throttle CPUs when the
passive trip is crossed.
config IMX_SCU_THERMAL
bool "Temperature sensor driver for NXP i.MX8"
@@ -29,7 +29,7 @@ config IMX_SCU_THERMAL
config IMX_TMU
bool "Thermal Management Unit driver for NXP i.MX8M / i.MX93 and QorIQ"
depends on ARCH_IMX8M || IMX93 || FSL_LAYERSCAPE
help
help
Support for the NXP Thermal Management Unit (TMU) sensors on
i.MX8M, i.MX93 and on QorIQ/Layerscape SoCs (LX2160A,
LS1028A, LS1088A, ...).
@@ -45,16 +45,16 @@ config RCAR_GEN3_THERMAL
driver into the U-Boot thermal framework.
config TI_DRA7_THERMAL
bool "Temperature sensor driver for TI dra7xx SOCs"
help
Enable thermal support for the Texas Instruments DRA752 SoC family.
The driver supports reading CPU temperature.
bool "Temperature sensor driver for TI dra7xx SOCs"
help
Enable thermal support for the Texas Instruments DRA752 SoC family.
The driver supports reading CPU temperature.
config TI_LM74_THERMAL
bool "Temperature sensor driver for TI LM74 chip"
help
Enable thermal support for the Texas Instruments LM74 chip.
The driver supports reading CPU temperature.
bool "Temperature sensor driver for TI LM74 chip"
help
Enable thermal support for the Texas Instruments LM74 chip.
The driver supports reading CPU temperature.
config DM_THERMAL_JC42
bool "JEDEC JC-42.4/TSE2004av SPD temperature sensor"
drivers/ufs/Kconfig
+2 -2
View File
@@ -19,7 +19,7 @@ config UFS_AMD_VERSAL2
config UFS_CADENCE
bool "Cadence platform driver for UFS"
depends on UFS
help
help
This selects the platform driver for the Cadence UFS host
controller present on present TI's J721e devices.
@@ -51,7 +51,7 @@ config UFS_PCI
config UFS_QCOM
bool "Qualcomm Host Controller driver for UFS"
depends on UFS && ARCH_SNAPDRAGON
help
help
This selects the platform driver for the UFS host
controller present on Qualcomm Snapdragon SoCs.
drivers/watchdog/Kconfig
+4 -4
View File
@@ -384,10 +384,10 @@ config WDT_SBSA
bool "SBSA watchdog timer support"
depends on WDT
help
Select this to enable SBSA watchdog timer.
This driver can operate ARM SBSA Generic Watchdog as a single stage.
In the single stage mode, when the timeout is reached, your system
will be reset by WS1. The first signal (WS0) is ignored.
Select this to enable SBSA watchdog timer.
This driver can operate ARM SBSA Generic Watchdog as a single stage.
In the single stage mode, when the timeout is reached, your system
will be reset by WS1. The first signal (WS0) is ignored.
config WDT_SIEMENS_PMIC
bool "Enable PMIC Watchdog Timer support for Siemens platforms"