Files
u-boot-krane/doc
Liangbin LianandQuentin Schulz 3a8b3cdd83 rockchip: rk3568: Add support for LinkEase EasePi R1
LinkEase EasePi R1 [1] is a high-performance mini router.

Specification:
- Rockchip RK3568
- 2GB/4GB LPDDR4 RAM
- 16GB on-board eMMC
- 1x M.2 key for 2280 NVMe (PCIe 3.0)
- 1x USB 3.0 Type-A
- 1x USB 2.0 Type-C (for USB flashing)
- 2x 1000 Base-T (native, RTL8211F)
- 2x 2500 Base-T (PCIe, RTL8125B)
- 1x HDMI 2.0 Output
- 12v DC Jack
- 1x Power key connected to PMIC
- 2x LEDs (one static power supplied, one GPIO controlled)

[1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html

Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
Link: https://patch.msgid.link/20260625125818.18914-2-jjm2473@gmail.com
Signed-off-by: Quentin Schulz <u-boot@0leil.net>
2026-07-09 20:11:03 +02:00
..
2026-07-06 18:26:12 -06:00
2026-07-06 18:26:12 -06:00

This patch series adds support for ZFS listing and load to u-boot.

To Enable zfs ls and load commands, modify the board specific config file with
#define CONFIG_CMD_ZFS

Steps to test:

1. After applying the patch, zfs specific commands can be seen
   in the boot loader prompt using
	UBOOT #help

	zfsload- load binary file from a ZFS file system
	zfsls  - list files in a directory (default /)

2. To list the files in zfs pool, device or partition, execute
	zfsls <interface> <dev[:part]> [POOL/@/dir/file]
	For example:
	UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/

3. To read and load a file from an ZFS formatted partition to RAM, execute
	zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
	For example:
	UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage

References :
	-- ZFS GRUB sources from Solaris GRUB-0.97
	-- GRUB Bazaar repository

Jorgen Lundman <lundman at lundman.net> 2012.