James HilliardandTom Rini
94b349bd90
The hash command currently always uses the software implementation for the selected algorithm, even when driver-model hash providers are available. Add a hash_digest_wd_lookup() helper which probes UCLASS_HASH devices in order and uses the first provider supporting the requested algorithm. Continue past unavailable providers and unsupported operations, but propagate a hard digest failure once a provider accepts the operation. Remember probe failures so they are not silently hidden by software fallback when no later provider succeeds. Use the helper from the hash command and retain its software fallback when no usable provider is present. Add sandbox tests covering provider fallback and hard-error propagation. Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
145 lines
4.4 KiB
Makefile
145 lines
4.4 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# Copyright (c) 2013 Google, Inc
|
|
# Copyright 2022-2023 Arm Limited and/or its affiliates <open-source-office@arm.com>
|
|
|
|
# Tests for particular subsystems - when enabling driver model for a new
|
|
# subsystem you must add sandbox tests here.
|
|
ifeq ($(CONFIG_XPL_BUILD),y)
|
|
obj-$(CONFIG_SPL_OF_PLATDATA) += of_platdata.o
|
|
else
|
|
obj-$(CONFIG_UT_DM) += bus.o
|
|
obj-$(CONFIG_UT_DM) += test-driver.o
|
|
obj-$(CONFIG_UT_DM) += test-fdt.o
|
|
obj-$(CONFIG_UT_DM) += test-uclass.o
|
|
|
|
obj-$(CONFIG_UT_DM) += core.o
|
|
obj-$(CONFIG_UT_DM) += read.o
|
|
obj-$(CONFIG_UT_DM) += phys2bus.o
|
|
ifeq ($(CONFIG_NVMXIP_QSPI)$(CONFIG_SANDBOX64),yy)
|
|
obj-y += nvmxip.o
|
|
endif
|
|
|
|
ifneq ($(CONFIG_SANDBOX),)
|
|
ifeq ($(CONFIG_ACPIGEN),y)
|
|
obj-y += acpi.o
|
|
obj-y += acpigen.o
|
|
obj-y += acpi_dp.o
|
|
obj-$(CONFIG_DM_GPIO) += gpio.o
|
|
obj-y += irq.o
|
|
endif
|
|
obj-$(CONFIG_ADC) += adc.o
|
|
obj-$(CONFIG_AES_SOFTWARE) += aes.o
|
|
obj-$(CONFIG_SOUND) += audio.o
|
|
obj-$(CONFIG_AXI) += axi.o
|
|
obj-$(CONFIG_BLK) += blk.o
|
|
obj-$(CONFIG_BLKMAP) += blkmap.o
|
|
obj-$(CONFIG_BUTTON) += button.o
|
|
obj-$(CONFIG_DM_BOOTCOUNT) += bootcount.o
|
|
obj-$(CONFIG_DM_REBOOT_MODE) += reboot-mode.o
|
|
obj-$(CONFIG_CLK) += clk.o clk_ccf.o
|
|
obj-$(CONFIG_CPU) += cpu.o
|
|
obj-$(CONFIG_CROS_EC) += cros_ec.o
|
|
obj-$(CONFIG_PWM_CROS_EC) += cros_ec_pwm.o
|
|
obj-$(CONFIG_$(PHASE_)DEVRES) += devres.o
|
|
obj-$(CONFIG_DMA) += dma.o
|
|
obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi_host.o
|
|
obj-$(CONFIG_DM_DSA) += dsa.o
|
|
obj-$(CONFIG_ECDSA_VERIFY) += ecdsa.o
|
|
obj-$(CONFIG_DM_HASH) += hash.o
|
|
obj-$(CONFIG_EFI_MEDIA_SANDBOX) += efi_media.o
|
|
obj-$(CONFIG_DM_ETH) += eth.o
|
|
obj-$(CONFIG_EXTCON) += extcon.o
|
|
ifneq ($(CONFIG_EFI_PARTITION),)
|
|
obj-$(CONFIG_FASTBOOT_FLASH_MMC) += fastboot.o
|
|
endif
|
|
obj-$(CONFIG_FIRMWARE) += firmware.o
|
|
obj-$(CONFIG_DM_FPGA) += fpga.o
|
|
obj-$(CONFIG_FWU_MDATA_GPT_BLK) += fwu_mdata.o
|
|
obj-$(CONFIG_SANDBOX) += host.o
|
|
obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock.o
|
|
obj-$(CONFIG_INTERCONNECT) += interconnect.o
|
|
obj-$(CONFIG_DM_I2C) += i2c.o
|
|
obj-$(CONFIG_I3C) += i3c.o
|
|
obj-$(CONFIG_SOUND) += i2s.o
|
|
obj-$(CONFIG_CLK_K210_SET_RATE) += k210_pll.o
|
|
obj-$(CONFIG_IOMMU) += iommu.o
|
|
obj-$(CONFIG_LED) += led.o
|
|
obj-$(CONFIG_VIDEO_BRIDGE_LVDS_CODEC) += video_bridge.o
|
|
obj-$(CONFIG_DM_MAILBOX) += mailbox.o
|
|
obj-$(CONFIG_DM_MDIO) += mdio.o
|
|
obj-$(CONFIG_DM_MDIO_MUX) += mdio_mux.o
|
|
obj-$(CONFIG_MEMORY) += memory.o
|
|
obj-$(CONFIG_MISC) += misc.o
|
|
obj-$(CONFIG_DM_MMC) += mmc.o
|
|
obj-$(CONFIG_CMD_MUX) += mux-cmd.o
|
|
obj-$(CONFIG_MULTIPLEXER) += mux-emul.o
|
|
obj-$(CONFIG_MUX_MMIO) += mux-mmio.o
|
|
obj-y += fdtdec.o
|
|
obj-$(CONFIG_MTD_RAW_NAND) += nand.o
|
|
obj-$(CONFIG_IP_DEFRAG) += net_defrag.o
|
|
obj-$(CONFIG_UT_DM) += nop.o
|
|
obj-y += ofnode.o
|
|
obj-y += ofread.o
|
|
obj-y += of_extra.o
|
|
obj-$(CONFIG_OSD) += osd.o
|
|
obj-$(CONFIG_VIDEO) += panel.o
|
|
obj-$(CONFIG_EFI_PARTITION) += part.o
|
|
obj-$(CONFIG_PCI) += pci.o
|
|
obj-$(CONFIG_P2SB) += p2sb.o
|
|
obj-$(CONFIG_PCI_ENDPOINT) += pci_ep.o
|
|
obj-$(CONFIG_PCH) += pch.o
|
|
obj-$(CONFIG_PHY) += phy.o
|
|
obj-$(CONFIG_PHY_COMMON_PROPS) += phy_common_props.o
|
|
ifneq ($(CONFIG_PINMUX),)
|
|
obj-$(CONFIG_PINCONF) += pinmux.o
|
|
endif
|
|
obj-$(CONFIG_POWER_DOMAIN) += power-domain.o
|
|
obj-$(CONFIG_ACPI_PMC) += pmc.o
|
|
obj-$(CONFIG_CMD_PMBUS) += pmbus.o
|
|
obj-$(CONFIG_DM_PMIC) += pmic.o
|
|
obj-$(CONFIG_DM_PWM) += pwm.o
|
|
obj-$(CONFIG_ARM_FFA_TRANSPORT) += ffa.o
|
|
obj-$(CONFIG_QFW) += qfw.o
|
|
obj-$(CONFIG_RAM) += ram.o
|
|
obj-y += regmap.o
|
|
obj-$(CONFIG_REMOTEPROC) += remoteproc.o
|
|
obj-$(CONFIG_DM_RESET) += reset.o
|
|
obj-$(CONFIG_SYSRESET) += sysreset.o
|
|
obj-$(CONFIG_DM_REGULATOR) += regulator.o
|
|
obj-$(CONFIG_CMD_RKMTD) += rkmtd.o
|
|
obj-$(CONFIG_$(PHASE_)DM_RNG) += rng.o
|
|
obj-$(CONFIG_DM_RTC) += rtc.o
|
|
obj-$(CONFIG_SCMI_FIRMWARE) += scmi.o
|
|
obj-$(CONFIG_SCSI) += scsi.o
|
|
obj-$(CONFIG_DM_SERIAL) += serial.o
|
|
obj-$(CONFIG_DM_SPI_FLASH) += sf.o
|
|
obj-$(CONFIG_SIMPLE_BUS) += simple-bus.o
|
|
obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
|
|
obj-$(CONFIG_SMEM) += smem.o
|
|
obj-$(CONFIG_SOC_DEVICE) += soc.o
|
|
obj-$(CONFIG_SOUND) += sound.o
|
|
obj-$(CONFIG_DM_SPI) += spi.o
|
|
obj-$(CONFIG_SPMI) += spmi.o
|
|
obj-y += syscon.o
|
|
obj-$(CONFIG_RESET_SYSCON) += syscon-reset.o
|
|
obj-$(CONFIG_SM) += sm.o
|
|
obj-$(CONFIG_SYSINFO) += sysinfo.o
|
|
obj-$(CONFIG_SYSINFO_GPIO) += sysinfo-gpio.o
|
|
obj-$(CONFIG_UT_DM) += tag.o
|
|
obj-$(CONFIG_TEE) += tee.o
|
|
obj-$(CONFIG_TIMER) += timer.o
|
|
obj-$(CONFIG_TPM_V2) += tpm.o
|
|
obj-$(CONFIG_DM_USB) += usb.o
|
|
obj-$(CONFIG_VIDEO_SANDBOX_SDL) += video.o
|
|
ifeq ($(CONFIG_VIRTIO_SANDBOX),y)
|
|
obj-y += virtio.o
|
|
obj-$(CONFIG_VIRTIO_RNG) += virtio_device.o
|
|
obj-$(CONFIG_VIRTIO_RNG) += virtio_rng.o
|
|
endif
|
|
ifeq ($(CONFIG_WDT_GPIO)$(CONFIG_WDT_SANDBOX),yy)
|
|
obj-y += wdt.o
|
|
endif
|
|
endif
|
|
endif # !SPL
|