Andre Przywara
7ad8e387d6
CONFIG_DRAM_SUNXI_TPR6 is the only DRAM config parameter that has a non-zero default value. Since we need to provide a value for all the other parameters anyway, avoiding TPR6 makes no real difference. To make matters worse, TPR6 is a compound value covering multiple DRAM types, but also spans over three SoCs, which makes it hard to find one good default value. Drop the default from Kconfig, and put some explicit values in the defconfigs for the few boards that were relying on the default so far. The value is taken from one BSP, only the lower byte matters anyway for those boards, all using DDR3 DRAM. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
29 lines
801 B
Plaintext
29 lines
801 B
Plaintext
CONFIG_ARM=y
|
|
CONFIG_ARCH_SUNXI=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h313-x96q"
|
|
CONFIG_DRAM_CLK=600
|
|
CONFIG_SPL=y
|
|
CONFIG_DRAM_SUNXI_DX_ODT=0x03030303
|
|
CONFIG_DRAM_SUNXI_DX_DRI=0x0e0e0e0e
|
|
CONFIG_DRAM_SUNXI_CA_DRI=0x1f12
|
|
CONFIG_DRAM_SUNXI_TPR0=0xc0001002
|
|
CONFIG_DRAM_SUNXI_TPR2=0x00000100
|
|
CONFIG_DRAM_SUNXI_TPR6=0x33808080
|
|
CONFIG_DRAM_SUNXI_TPR10=0x002f0107
|
|
CONFIG_DRAM_SUNXI_TPR11=0xddddcccc
|
|
CONFIG_DRAM_SUNXI_TPR12=0xeddc7665
|
|
CONFIG_MACH_SUN50I_H616=y
|
|
CONFIG_SUNXI_DRAM_H616_DDR3_1333=y
|
|
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
|
|
CONFIG_R_I2C_ENABLE=y
|
|
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
|
CONFIG_SPL_I2C=y
|
|
CONFIG_SPL_SYS_I2C_LEGACY=y
|
|
CONFIG_SYS_I2C_MVTWSI=y
|
|
CONFIG_SYS_I2C_SPEED=400000
|
|
CONFIG_SUPPORT_EMMC_BOOT=y
|
|
CONFIG_SUN8I_EMAC=y
|
|
CONFIG_AXP305_POWER=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_OHCI_HCD=y
|