Commit dc3765ede5 ("doc: Switch from setenv to env set") was
too eager to switch "setenv" to "env set" and also incorrectly
rewrote "gpt setenv" to "gpt env set". Undo this error.
Fixes: dc3765ede5 ("doc: Switch from setenv to env set")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The attribute mnemonic table did not cover EFI_MEMORY_ISA_VALID and the
EFI_MEMORY_ISA_MASK field, and attribute bits without a mnemonic were
silently dropped, so a memory map carrying ISA-specific, invalid or not
yet known attributes displayed incomplete information without any hint
that something was missing.
Add a mnemonic for EFI_MEMORY_ISA_VALID and print the ISA-specific
field as ISA=<value> when it is valid, instead of decoding bits whose
meaning U-Boot cannot know. Any remaining bits that match neither the
mnemonic table nor the ISA field are printed as a hexadecimal value.
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
The efi and efidebug commands each carried their own code for printing
the EFI memory map, with separate tables of memory type and attribute
names. The copies had drifted: efidebug knew EFI_PERSISTENT_MEMORY_TYPE
while 'efi mem' printed it as '<invalid>', neither table knew
EFI_UNACCEPTED_MEMORY_TYPE, and the 'efi mem' printer had misaligned
column headers, a broken '<gap>' line and a superfluous Virtual column:
the map is identity mapped before SetVirtualAddressMap() is called, so
the field carries no information at the time the command can run.
Move the printing loop of 'efidebug memmap' into efi_common.c as
efi_show_memmap(), which is linked into both commands, and use it from
both. The second copy in 'efi mem' is deleted together with
efi_print_mem_table() and the private sorting and merging code,
including the 'all' argument.
The memory type names follow the UEFI specification with the leading
'Efi' and the trailing 'Type' stripped, for example ConventionalMemory
for EfiConventionalMemory, and the missing name for unaccepted memory
is added. The type column is widened to fit the longest name,
MemoryMappedIOPortSpace.
The shared function iterates the map with the descriptor size reported
by the firmware instead of assuming sizeof(struct efi_mem_desc). This
matters for 'efi mem' under EDK II based firmware, which reports a
descriptor size of 0x30. The memory map key, which was printed
uninitialized on the payload path, is now initialized. The command
documentation is updated with output captured from the app running
under OVMF, and documents why virtual addresses are not shown.
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Vincent Jardin <vjardin@free.fr> says:
3 commits providing documentation of impacts and testing the dispatch
for null_dev_desc_ok fstypes (semihosting, ubifs, sandbox) in the
generic `load <iface> ...` command.
The test does not cover ubifs, I could not make it work with
qemu. Since the code logic is there and testing with semihost
is done, it should cover the needed cases.
Link: https://lore.kernel.org/r/20260715165735.3207801-1-vjardin@free.fr
The "env" command is the recommended environment management command,
its "print" subcommand is the equivalent replacement for legacy "printenv"
command. Update the documentation to use the contemporary "env print"
command instead of legacy "printenv" command.
Note that the "printenv" command is unlikely to be removed from U-Boot
in the near future due to it being integral part of the command line
ABI.
Implemented using:
$ sed -i 's@\<printenv\>@env print@g' $(git grep -li '\<printenv\>' doc/) README
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The "env" command is the recommended environment management command,
its "set" subcommand is the equivalent replacement for legacy "setenv"
command. Update the documentation to use the contemporary "env set"
command instead of legacy "setenv" command.
Note that the "setenv" command is unlikely to be removed from U-Boot
in the near future due to it being integral part of the command line
ABI.
Implemented using:
$ sed -i 's@\<setenv\>@env set@g' $(git grep -li '\<setenv\>' doc/) README
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Document the dispatch path added by the former commit
fs: dispatch null_dev_desc_ok filesystems before lookup
Add a null-block-device interfaces section that:
* lists the three fstypes that can benefit of it (semihosting, ubifs,
sandbox) and the CONFIG option that builds each
* explains the '-' convention for the unused <dev[:part]> field
Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Reviewed-by: Simon Glass <sjg@chromium.org>
Rasmus Villemoes <rv@rasmusvillemoes.dk> says:
This started by me wanting something like what patch 8 does. That
wasn't too hard, except we had no strcasestr(), and also our regex
engine (which I didn't really want to pull into the mix anyway)
doesn't have a flag that requests case-insensitive matching. So I
wanted to add strcasestr(), but then I stumbled on a bunch of stuff
that should be cleaned up in str-land.
Link: https://lore.kernel.org/r/20260708203711.849489-1-rv@rasmusvillemoes.dk
Add a little documentation for the config command and its new ability
to filter the output.
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a sandbox LDO3 with a configurable 1.8V to 3.3V range and use it
to test regulator_set_value_clamp().
Test in-range requests, clamping against the regulator limits, invalid
ranges outside the regulator limits and a min value higher than max.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This reverts:
- commit e49c84f7bb ("doc: usage: cmd: reset: specify when the -edl
option is available")
- commit 1076feb8a3 ("cmd: boot: fix edl being shown when not
supported")
- commit 63c806ba0e ("qcom_defconfig: enable psci based sysreset")
- commit ef06c5d76f ("cmd: boot: Add '-edl' option to reset command
documentation")
- commit 32825eaddc ("sysreset: Implement PSCI based reset to EDL mode
for QCOM SoCs")
- commit fcb48b8981 ("drivers: sysreset: Add sysreset op that can take
arguments")
There was a conflict reverting commit 63c806ba0e ("qcom_defconfig:
enable psci based sysreset") due to commit 02ef1859b4 ("configs:
Resync with savedefconfig"), but the conflict resolution was trivial.
The args support for the sysreset uclass contains a logic bug. The first
sysreset device implementing the request_arg callback will consume the
args, not support the specified arg and thus return -EPROTONOSUPPORT
which will stop the iteration over all sysreset devices.
This is an issue if one has multiple sysreset devices and each with
support for different (valid) args. If a sysreset device implements a
-dummy argument and another -foo and a user calls reset -dummy from the
U-Boot CLI, it'll depend on which sysreset device will be attempted
first. If it is the one implementing -foo, it'll return it doesn't
support the argument with -EPROTONOSUPPORT in which case the device
implementing -dummy will never be attempted and instead we'll do a cold
reset which is very likely not what's expected from the user.
Casey suggested[1] we revert this and start from scratch again with a
different implementation instead.
[1] https://lore.kernel.org/u-boot/77ff0f56-5c3b-42e7-bdd1-bf90296da900@linaro.org/
Acked-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
The option is only available when CONFIG_SYSRESET_QCOM_PSCI is enabled,
so let's make that explicit in the boot cmd documentation.
Due to the implementation in drivers/sysreset/sysreset-uclass.c
do_reset() function, all options to the reset command are passed to all
sysreset drivers' sysreset_ops.request_arg callback (including -w) which
is only available when CONFIG_SYSRESET_CMD_RESET_ARGS=y. -w, however,
works also without this option.
Fixes: ef06c5d76f ("cmd: boot: Add '-edl' option to reset command documentation")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
"Do warm WARM" doesn't mean anything, I'm assuming the intent was to say
"Do WARM reset" so reword.
Fixes: 34e452dd02 ("doc: usage: Group all shell command docs into cmd/ sub-directory")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
The 'part' command currently allows looking up a partition only by its
number or name.
Extend the 'number', 'start', and 'size' subcommands to support looking
up the partition via its UUID. Unlike names, UUIDs guarantee unique
partition identification, avoiding ambiguity.
The logic is updated to check if the provided string is a valid UUID
before falling back to a name-based search. The help strings for these
subcommands are updated accordingly.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Quentin Schulz <foss+uboot@0leil.net> says:
This migrates the net options away from the main Kconfig to net/Kconfig,
rename the current NET option to NET_LEGACY to really highlight what it
is and hopefully encourage more people to use lwIP, add a new NET
menuconfig (but keep NO_NET as an alias to NET=n for now) which then
allows us to replace all the "if legacy_stack || lwip_stack" checks with
"if net_support" which is easier to read and maintain.
The only doubt I have is wrt SYS_RX_ETH_BUFFER which seems to be needed
for now even when no network is configured? Likely due to
include/net-common.h with PKTBUFSRX?
No change in behavior is intended. Only change in defconfig including
other defconfigs where NO_NET=y or NET is not set, in which case NO_NET
is not set or NET=y should be set in the top defconfig. Similar change
required for config fragments. See commit log in patch adding NET
menuconfig for details.
This was tested based on 70fd0c3bb7 ("x86: there is no
CONFIG_UBOOT_ROMSIZE_KB_12288"), from within the GitLab CI container
trini/u-boot-gitlab-ci-runner:noble-20251013-23Jan2026 and set up
similarly as in "build all platforms in a single job" GitLab CI job.
#!/usr/bin/env bash
set -o pipefail
set -eux
ARGS="-BvelPEWM --reproducible-builds --step 0"
./tools/buildman/buildman -o ${O} --force-build $ARGS -CE $*
./tools/buildman/buildman -o ${O} $ARGS -Ssd $*
O=../build/u-boot/ ../u-boot.sh -b master^..b4/net-kconfig |& tee ../log.txt
I can't really decipher the log.txt, but there's no line starting with
+ which would be an error according to tools/buildman/builder.py help
text. Additionally, because I started the script with set -e set and
because buildman has an exit code != 0 when it fails to build a board,
and I have the summary printed (which is the second buildman call), I
believe it means all builds passed.
The summary is the following:
aarch64: (for 537/537 boards) all +0.0 rodata +0.0
uniphier_v8 : all +1 rodata +1
u-boot: add: 0/0, grow: 1/0 bytes: 1/0 (1)
function old new delta
data_gz 10640 10641 +1
arm: (for 733/733 boards) all -0.0 rodata -0.0
uniphier_v7 : all -1 rodata -1
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-1 (-1)
function old new delta
data_gz 11919 11918 -1
opos6uldev : all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 18778 18775 -3
uniphier_ld4_sld8: all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 11276 11273 -3
stemmy : all -20 rodata -20
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-20 (-20)
function old new delta
data_gz 15783 15763 -20
As far as I could tell this data_gz is an automatically generated array
when CONFIG_CMD_CONFIG is enabled. It is the compressed .config stored
in binary form. Because I'm changing the name of symbols, replacing a
menu with a menuconfig, additional text makes it to .config and the
"# Networking" section in .config disappears.
Here is the diff for the 5 defconfigs listed above, generated with:
for f in build/*-m; do
diff --unified=0 $f/.config $(dirname $f)/$(basename -a -s '-m' $f)/.config
done
(-m is the build directory for master, and without the suffix, it's the
top commit of this series)
"""
--- build/opos6uldev-m/.config 2026-04-20 10:53:49.804528526 +0200
+++ build/opos6uldev/.config 2026-04-20 11:03:37.430242767 +0200
@@ -970,4 +969,0 @@
-
-#
-# Networking
-#
@@ -975,0 +972 @@
+CONFIG_NET_LEGACY=y
--- build/stemmy-m/.config 2026-04-20 11:01:33.653698123 +0200
+++ build/stemmy/.config 2026-04-20 11:04:53.452577311 +0200
@@ -733,4 +732,0 @@
-
-#
-# Networking
-#
@@ -738,2 +733,0 @@
-# CONFIG_NET is not set
-# CONFIG_NET_LWIP is not set
--- build/uniphier_ld4_sld8-m/.config 2026-04-20 11:00:41.605469071 +0200
+++ build/uniphier_ld4_sld8/.config 2026-04-20 11:04:22.226439899 +0200
@@ -997,4 +996,0 @@
-
-#
-# Networking
-#
@@ -1002,0 +999 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v7-m/.config 2026-04-20 10:53:04.019307319 +0200
+++ build/uniphier_v7/.config 2026-04-20 11:03:01.688085486 +0200
@@ -1004,4 +1003,0 @@
-
-#
-# Networking
-#
@@ -1009,0 +1006 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v8-m/.config 2026-04-20 10:43:05.614441175 +0200
+++ build/uniphier_v8/.config 2026-04-20 10:41:03.214852130 +0200
@@ -875,4 +874,0 @@
-
-#
-# Networking
-#
@@ -880,0 +877 @@
+CONFIG_NET_LEGACY=y
"""
This is fine:
- Networking menu doesn't exist anymore so "#\n# Networking\n#\n" won't
be in .config anymore.
- opos6uldev, uniphier_ld4_sld8, uniphier_v7 and uniphier_v8 all have
(old) CONFIG_NET enabled, (new) CONFIG_NET will still be set but
CONFIG_NET_LEGACY also needs to be defined now to reflect the stack
choice (even if default),
- stemmy has CONFIG_NO_NET set, which means CONFIG_NET and
CONFIG_NET_LWIP are not reachable anymore hence why they don't need to
be part of .config,
GitLab CI was run on this series (well, not exactly, but it's only
changes to the git logs that were made):
https://source.denx.de/u-boot/contributors/qschulz/u-boot/-/pipelines/29849
It passes.
Link: https://lore.kernel.org/r/20260420-net-kconfig-v1-0-9900002d8e72@cherry.de
Since the move to make NET a menuconfig and NO_NET a synonym of NET=n,
when NET is enabled, NET_LEGACY || NET_LWIP is necessarily true, so
let's simplify the various checks across the codebase.
SPL_NET_LWIP doesn't exist but SPL_NET_LEGACY is an alias for SPL_NET so
the proper symbol is still defined in SPL whenever needed.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Highlight that NET really is the legacy networking stack by renaming the
option to NET_LEGACY.
This requires us to add an SPL_NET_LEGACY alias to SPL_NET as otherwise
CONFIG_IS_ENABLED(NET_LEGACY) will not work for SPL.
The "depends on !NET_LWIP" for SPL_NET clearly highlights that it is
using the legacy networking app so this seems fine to do.
This also has the benefit of removing potential confusion on NET being a
specific networking stack instead of "any" network stack.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
bdinfo may also have -a, -e and -m options depending on some symbols
being set. Document all this and provide an example on how to use them
and what they typically output.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
The devicetree, current eth and IP addr info are only available when
certain symbols are defined, so let's make the dependencies explicit.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This pull request brings together a set of fixes and enhancements across
the SoCFPGA platform family, with a focus on MMC/SPL robustness, EFI
boot enablement, and Agilex5 SD/eMMC support.
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/28776
Highlights:
*
SPL / MMC:
o
Fix Kconfig handling for
SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
o
Correct raw sector calculations and respect explicit sector values
when loading U-Boot from MMC in SPL
o
Adjust raw MMC loading logic for SoCFPGA platforms
*
EFI boot:
o
Permit EFI booting on SoCFPGA platforms
o
Disable mkeficapsule tool build for Arria 10 where unsupported
*
Agilex5:
o
Upgrade SDHCI controller from SD4HC to SD6HC
o
Enable MMC and Cadence SDHCI support in defconfig
o
Add dedicated eMMC device tree and defconfig for Agilex5 SoCDK
o
Revert incorrect GPIO configuration for SDIO_SEL
o
Refine U-Boot DT handling for SD and eMMC boot variants
*
SPI:
o
Allow disabling the DesignWare SPI driver in SPL via Kconfig
*
Board / configuration fixes:
o
Enable random MAC address generation for Cyclone V
o
Fix DE0-Nano-SoC boot configuration
o
Remove obsolete or conflicting options from multiple legacy
SoCFPGA defconfigs
Quentin Schulz <foss+uboot@0leil.net> says:
u-boot,boot-led and u-boot,error-led aren't actually handled by some
generic code but rather by board or architecture specific code. They
also aren't properties that are part of the official dt-binding so they
cannot be upstreamed. For u-boot,boot-led, there's actually a proper
replacement which is /options/u-boot/boot-led[1] (+ CONFIG_LED_BOOT=y).
For Rockchip boards, either nothing (for RK3066, PX30 and RK3399) was
using that property or (for RK3188) the code handling it was guarded by
symbols that were not enabled in the defconfig. For those, the property
and guarded code are removed.
For the Sam9x60 Curiosity, it seems that even though the LED is
controlled whenever CONFIG_LED is enabled, it isn't enabled by default
in the defconfig (but the code was added without modifying the
defconfig, explicitly leaving a choice to the user). I decided to keep
that feature by simply migrating it to the new API, though I cannot test
it as I do not own the device.
The STM32 boards will be migrated in the near future once their upstream
(kernel) Device Trees gain the new way to specify this (via
/options/u-boot/boot-led). I'll let Patrice handle this, see
https://lore.kernel.org/u-boot/94ed1988-13e8-4fe3-bdff-ba2c9973c556@foss.st.com/
and
https://lore.kernel.org/u-boot/2a3aa43a-ce19-41e1-ab56-556629ce5cf9@foss.st.com/
After this, only one user of u-boot,boot-led will be left, based on
STM32: board/dhelectronics/dh_stm32mp1/board.c. @Patrice, maybe that's
something you want to have a look at as well, this seems to be some
evaluation kit?
The only users of u-boot,error-led are STM32 boards, so I'll leave this
to Patrice as well, I do not know what's the way to go for that one.
In any case, I would like to not encourage people to use out-of-spec DT
properties when there is another option (u-boot,boot-led), so I remove
the properties from the dt-binding document from U-Boot.
The help text for the blink subcommand of the led command was misleading
so this is now fixed.
This also moves the content of doc/README.LED into the doc/api/led.rst,
while clearly stating one shouldn't be using this anymore.
This also gets rid of dt-binding that we already have in dts/upstream.
Finally, this adds documentation for the led shell command.
[1] https://github.com/devicetree-org/dt-schema/blob/v2025.08/dtschema/schemas/options/u-boot.yaml#L113-L116
Link: https://lore.kernel.org/r/20251112-led-old-dt-v1-0-2892d49517db@cherry.de
This is a natural buddy to the existing "part number", allowing one to
get the partition name for a given partition number.
Acked-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Acked-by: Quentin Schuloz <quentin.schulz@cherry.de>
Tested-by: Anshul Dalal <anshuld@ti.com>
Update the command to show the size and selected file, since this is
useful information at times. Add a heading so it is clear what each
field refers to.
Add a simple test as well.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Kory Maincent (TI.com) <kory.maincent@bootlin.com> says:
This series converts the extension board framework to use UCLASS as
requested by Simon Glass, then adds extension support to pxe_utils
and bootmeth_efi (not tested) to enable extension boards devicetree load
in the standard boot process.
I can't test the imx8 extension scan enabled by the
imx8mm-cl-iot-gate_defconfig as I don't have this board.
I also can't test the efi bootmeth change as I don't have such board.
Link: https://lore.kernel.org/r/20251030-feature_sysboot_extension_board-v5-0-cfb77672fc68@bootlin.com
Introduce UCLASS-based extension board support to enable more
standardized and automatic loading of extension board device tree
overlays in preparation for integration with bootstd and pxe_utils.
Several #if CONFIG_IS_ENABLED are used in cmd/extension_board.c to ease the
development but don't worry they are removed later in the series.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
With the addition of general text about how the return value is handled,
reference that while retaining the additional information about setting
$seama_image_size
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
With the addition of general text about how the return value is handled,
remove the examples from the askenv documentation as they are all normal
expected results.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
For nearly all commands in U-Boot the '?' variable is handled the same
way with 0 meaning success, 1 meaning any failure. Explain this in the
general rules section of the cmdline documentation (with a link to a
counter example) and then remove the redundant wording from most
commands. We retain a section about the return value in a number of
places where we are doing something such as always returning a specific
value or we have useful additional information to go along with the
normal return codes.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
* Avoid two step navigation to get to the description of the write command.
* Add missing index entries
* Correct formatting of the examples.
* Describe configuration and return value.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
A few lines of code being guarded by the CONFIG_TFTP_PORT option seems
an unnecessary restriction on the TFTP support provided by a vanilla
U-Boot image. In cases where the TFTP server cannot run as superuser -
and hence cannot run on the well-known port 69 - this quirk incurs a
full reconfiguration and rebuild of the bootloader only in order to
select the appropriate destination port.
Remove the CONFIG_TFTP_PORT option entirely and make the tftpdstp and
tftpsrcp variables always have an effect. Their being unset will mean
that U-Boot behaves the same as if CONFIG_TFTP_PORT was unset. Update
the documentation accordingly. And fix up the single board which was
originally enabling this option.
Signed-off-by: Alvin Šipraga <alvin@pqrs.dk>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Introduce the DNS Kconfig symbol so that various network commands may
use host names without the dns command (CMD_DNS) being selected.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
CC: E Shattow <e@freeshell.de>
Add i3c command file to support select, get i3c device
target list, read and write operation.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
Add a proper documentation file for the sntp command in RST format and
drop doc/README.SNTP. The documentation now includes the NET_LWIP
specificities.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
The note about U-Boot not being able to verify server certificates is
false now that WGET_CACERT and WGET_BUILTIN_CACERT have been added.
Remove it.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Add information on type partition, copied from README.gpt.
I also correct issue for gpt_parts variable and add example of
"gpt read" usage.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
