Raymond Mao <raymond.mao@linaro.org> says:
This patch set adds/adapts a few bloblist APIs and implements Arm arch
custom function to retrieve the bloblist (aka. Transfer List) from
previous loader via boot arguments when BLOBLIST option is enabled and
all boot arguments are compliant to the register conventions defined
in the Firmware Handoff spec v0.9.
If an arch wishes to have different behaviors for loading bloblist
from the previous boot stage, it is required to implement the custom
function xferlist_from_boot_arg().
When BLOBLIST is enabled, FDT is expected to be from bloblist
carried from previous stage, instead of from OF_BOARD, therefore
only enable OF_HAS_PRIOR_STAGE when BLOBLIST is disabled.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
During bloblist initialization, load the bloblist via boot arguments
from the previous loader.
If a valid bloblist exists in boot arguments, relocate it into the
fixed bloblist memory region.
If not, fallback to support BLOBLIST_ADDR or BLOBLIST_ALLOC.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Add arch custom function to get bloblist from boot arguments.
Check whether boot arguments aligns with the register conventions
defined in FW Handoff spec v0.9.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
The current bloblist pointer and size can be retrieved from global
data, so we don't need to pass them from the function arguments.
This change also help to remove all external access of gd->bloblist
outside of bloblist module.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Instead of expecting the bloblist total size to be the same as the
pre-allocated buffer size, practically we are more interested in
whether the pre-allocated buffer size is bigger than the bloblist
total size.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add bloblist_check_reg_conv() to check whether the bloblist is compliant
to the register conventions defined in Firmware Handoff specification.
This API can be used for all Arm platforms.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Roger Quadros <rogerq@kernel.org> says:
MUX driver should autoprobe if the device tree has "idle-states"
property. Drop using the custom "u-boot,mux-autoprobe" property
in TI device trees.
As it is present for USB and USB won't work without the MUX
initialized correctly, add "bootph-all" property to MUX nodes.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
MUX driver should autoprobe if the device tree has "idle-states"
property. Drop using the custom "u-boot,mux-autoprobe" property.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Some platforms need the MUX state to be auto initialized at
boot time even if there are no explicit users for the MUX.
In these cases, the MUX device tree has "idle-states" property
which specifies what state the MUX should be initialized to.
So far we were relying on custom u-boot property "u-boot,mux-autoprobe"
to autoprobe such MUXes. This patch causes the MUX to autoprobe
if it has "idle-states" property in device tree.
This should allow us to stop using the custom "u-boot,mux-autoprobe"
property.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Pull request efi-next-2024-02-28
* set IMAGE_DLLCHARACTERISTICS_NX_COMPAT in EFI binaries
* provide SBI based runtime system reset
* page align EFI binary section on ARMv7
* separate .data and .text sections of EFI binaries on ARMv7
EFI binaries should not contain sections that are both writable and
executable. Separate the RX .text section from the RW .data section.
We currently don't created relocation sections (.rel.*) for our EFI
binaries. Anyway these would have to be converted to PE/COFF relocations.
Enumerate them under DISCARD and add a comment.
Correct the characteristics of the sections.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
On RISC-V systems system the Supervisory Binary Interface provides system
reset and poweroff. Use it at EFI runtime.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The IMAGE_DLLCHARACTERISTICS_NX_COMPAT flag marks an EFI binary where
the following conditions are met [1]:
* Executable and writable sections are separated.
* The application does not run self-modifying code.
* The application uses the EFI_MEMORY_ATTRIBUTE_PROTOCOL when loading
executable code.
* The application does not assume that all memory ranges are usable.
* The stack is not expected to be executable.
The only EFI binaries U-Boot provides that do not fulfill these
requirements are the EFI app and the EFI payload.
Once we have implemented separation of writable and executable memory in
U-Boot we can use the IMAGE_DLLCHARACTERISTICS_NX_COMPAT flag to decide
if we will load an EFI binary.
[1] New UEFI CA memory mitigation requirements for signing
https://techcommunity.microsoft.com/t5/hardware-dev-center/new-uefi-ca-memory-mitigation-requirements-for-signing/ba-p/3608714
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Perform a little re-organization of Kconfig so that we can have
CONFIG_SYS_CONFIG_NAME be unset and so not require a "board.h" file.
Then go and remove a number of now not required header files.
Generally speaking, we do not prompt for this value and define it in the
board specific Kconfig file. There are some valid use cases however
today where we do prompt for this value, so instead of having this be
done in a number of locations, do this at the top-level location only.
This removes the question from a number of other locations and makes it
consistent that when we do set the value directly, we always do it the
same way. We don't need to specify the type, it's always string.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the hc2910-2aghd05 platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the slimbootloader platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the qemu-x86* platforms and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the minnowmax platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the galileo platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the efi-x86_payload* platforms and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the efi-x86_app* platforms and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the edison platform and remove
the otherwise empty file.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the crownbay platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the cougarcanyon2 platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the cherryhill platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the bayleybay platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the coreboot platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the xilinx_mbv platforms and remove
the otherwise empty file.
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
It is possible to have a platform which does not require a board.h file
to build, but today we need an empty one for our generated config.h file
to be valid. Allow for omitting this file if CONFIG_SYS_CONFIG_NAME is
not set.
Signed-off-by: Tom Rini <trini@konsulko.com>
- Enable the thermal driver for the imx8m phycore boards.
- Convert imx53-qsb to watchdog driver to fix the 'reset' command.
- Remove multiline string from imx6dl-sielaff.
- Add SPI boot support for imxrt1050-evk.
- Convert opos6uldev to watchdog driver to fix the 'reset' command.
Commit 68dcbdd594 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementing the watchdog reset.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Commit 68dcbdd594 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementing the watchdog reset.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Add support for booting the imxrt1050-evk from spi.
Add imximage config and the ability for SPL to boot from NOR.
Enable binman in Kconfig and device tree for imxrt* as it is used to
prepend fspi_header.bin to SPL and u-boot.img.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Tom Rini
Raymond MaoandTom Rini
Roger QuadrosandTom Rini
Heinrich Schuchardt
Sébastien SzymanskiandFabio Estevam
Fabio EstevamandFabio Estevam
Benjamin HahnandFabio Estevam
Mathieu OthaceheandFabio Estevam
Frieder SchrempfandFabio Estevam
Jesse TaubeandFabio Estevam